Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 120 for “"leakage flow"”.

  1. Aerodynamic and aeroacoustics characterisation of tip leakage flow

    … the noise generated by the interaction of tip leakage flow with the blade’s geometric singularities is one of the least understood. This thesis deals with identifying the mechanisms involved in the generation and reduction of tip leakage noise for a single stationary aerofoil, which enables a …

    soton Download PDF for Aerodynamic and aeroacoustics characterisation of tip leakage flow (opens in a new tab)

  2. Leakage Flow Modeling for Multiphase Twin Screw Pumps

    … differential pressures. A two-phase compressible flow model is used to determine the rate of leakage backflow through clearances within the pump. The model incorporates the possibility of choking due to sonic flow. Hydraulic imbalances cause rotor deflection, and the model accounts for increased …

    tamu Repository record for Leakage Flow Modeling for Multiphase Twin Screw Pumps (opens in a new tab)

  3. Mathematical modeling of leakage flow through labyrinth seals

    … turbo machines. One such loss is that of the flow through labyrinth seals. As part of a larger study, this study concentrates on the development of such loss models to aid in the performance prediction of turbo machines. The aim of this study was therefore firstly to understand the nature of …

    nwu-za Repository record for Mathematical modeling of leakage flow through labyrinth seals (opens in a new tab)

  4. Tip leakage flow in a linear turbine cascade

    … was performed to study the details of flow in the tip clearance gap of a linear turbine blade cascade. The cascade was designed and built to be geometrically similar to the earlier VPI&SU cascade; however, the new cascade also had a tip gap (2.1 percent of blade height) and two endwall …

    vt Repository record for Tip leakage flow in a linear turbine cascade (opens in a new tab)

  5. A study of tip-leakage flow through orifice investigations

    "Compressible fluid dynamics of flow through plain-faced long orifices was investigated with the hope of gaining insight into the fluid dynamics of tip leakage flow. The Reynolds number range investigated was greater than 10*. Measurements were made of the discharge coefficient as a function of …

    vt Repository record for A study of tip-leakage flow through orifice investigations (opens in a new tab)

  6. Analysis of the tip leakage flow field in an axial turbine

    … using the Naval Postgraduate School cold-flow turbine test rig were made with 3D viscous computational fluid dynamics flow solutions. The turbine tested was the first stage of the Pratt and Whitney designed High Pressure Fuel Turbopump for the Space Shuttle Main Engine. The laser …

    nps Repository record for Analysis of the tip leakage flow field in an axial turbine (opens in a new tab)

  7. Tip Leakage Flow Downstream a Compressor Cascade with Moving End Wall

    … between the blade tips and casing upon the flow. Detailed 4-sensor hot wire measurements were made at various locations downstream the cascade. The results are presented in term of mean flow field and turbulence flow field. In order to reveal the effects of moving end wall, the results also …

    vt Repository record for Tip Leakage Flow Downstream a Compressor Cascade with Moving End Wall (opens in a new tab)

  8. Tip leakage flow, heat transfer and blade lifing in a jet engine turbine

    … code (MEFP) was used to calculate developing flow and heat transfer in turbine tip gaps. Successful calculations of the heat transfer to a model turbine blade tip were obtained with a Prandtl mixing length turbulence model. The calculations revealed details of the flow development including …

    vt Repository record for Tip leakage flow, heat transfer and blade lifing in a jet engine turbine (opens in a new tab)

  9. Unsteady Turbulence Interaction in a Tip Leakage Flow Downstream of a Simulated Axial Compressor Rotor

    The unsteady behavior of a tip leakage flow downstream of a simulated axial compressor rotor has been studied. The Virginia Tech low speed linear cascade wind tunnel was adapted to model the unsteady tip leakage flow produced by a rotor operating in the vortical wakes of a set of stator vanes. The …

    vt Repository record for Unsteady Turbulence Interaction in a Tip Leakage Flow Downstream of a Simulated Axial Compressor Rotor (opens in a new tab)

  10. Numerical analysis of blade tip leakage flow and shroud heat transfer in gas turbine engines

    … the turbine material from this severe situation. Leakage flow over the blade tip is also one of the important issues to improve the turbine performance. To understand the detailed phenomena and natures of the heat transfer on the turbine blade tip and casing in association with the tip leakage …

    concordia Download PDF for Numerical analysis of blade tip leakage flow and shroud heat transfer in gas turbine engines (opens in a new tab)

  11. Numerical investigation of the unsteady aerodynamics of blade tip leakage flow inside gas turbine engines

    … by a periodically unsteady three-dimensional flow field. Due to the pressure difference across the blade tip, leakage flow enters the gap region from the pressure side and exits from the suction side. Tip leakage flow consists of hot mainstream gas and is highly undesirable since it does not …

    concordia Download PDF for Numerical investigation of the unsteady aerodynamics of blade tip leakage flow inside gas turbine engines (opens in a new tab)

  12. Experimental investigation of disc cavity leakage flow and hub endwall contouring in a linear rotor cascade.

    … results which document mixing of passage flow and leakage flow in a rotor stage of a high pressure turbine are presented. Of specific focus are the effects of hub endwall contour geometries on mixing of the two flows and on film cooling coverage by the leakage flow over the endwall. The …

    umn Repository record for Experimental investigation of disc cavity leakage flow and hub endwall contouring in a linear rotor cascade. (opens in a new tab)

  13. Influence of the Implant Location on the Hinge and Leakage Flow Fields Through Bileaflet Mechanical Heart Valves

    … The present study aimed to investigate the leakage, hinge, and near hinge flow fields of two BMHV under simulated physiologic aortic flow conditions and to compare these results with previous findings in the mitral position to better understand how the implant location influences the valve …

    gatech Repository record for Influence of the Implant Location on the Hinge and Leakage Flow Fields Through Bileaflet Mechanical Heart Valves (opens in a new tab)

  14. Characterizing the Role of Tip Leakage Flow in the Onset of Stall in Axial Compressors and Cavitation Inception in Ducted Propeller

    … an accurate understanding of the underlying flow physics. The task becomes particularly challenging when these machines operate under extreme conditions. This thesis examines two specific phenomena – the onset of stall in axial compressors and cavitation inception in a ducted marine …

    jhu Repository record for Characterizing the Role of Tip Leakage Flow in the Onset of Stall in Axial Compressors and Cavitation Inception in Ducted Propeller (opens in a new tab)

  15. Experimental Cascade Simulation of First Stage High Pressure Gas Turbine with Effects of Leakage Flow and Contouring on Endwall Film Cooling

    Flow in a high pressure gas turbine passage is complex involving systems of secondary vortex flows. This complexity causes difficulty in providing film cooling coverage to the thermally loaded hub endwall region. An improved understanding of the effect of these flow features on endwall heat …

    umn Repository record for Experimental Cascade Simulation of First Stage High Pressure Gas Turbine with Effects of Leakage Flow and Contouring on Endwall Film Cooling (opens in a new tab)

  16. Endwall Heat Transfer and Shear Stress for a Nozzle Guide Vane with Fillets and a Leakage Interface

    … is compounded by a complex vortical secondary flow at the junction of the endwall and the airfoil. This flow tends to increase local heat transfer rates and sweep coolant away from component surfaces, as well as decrease the turbine aerodynamic efficiency. Past research has shown that a large …

    vt Repository record for Endwall Heat Transfer and Shear Stress for a Nozzle Guide Vane with Fillets and a Leakage Interface (opens in a new tab)

  17. Performance prediction model for positive displacement helical screw flowmeters

    … the performance of positive displacement flowmeters. This model allows to predict the performance of any positive displacement meter if 8 coefficients describing the meter design are known. The logic is that a flowmeter performs at a defined pressure loss for a given speed. This pressure …

    southwales Repository record for Performance prediction model for positive displacement helical screw flowmeters (opens in a new tab) Download PDF for Performance prediction model for positive displacement helical screw flowmeters (opens in a new tab)

Page 1 of 6