Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"light soaking"”.
-
Stability of silicon surface passivation under damp heat and light soaking
… silicon surface passivation under damp heat and light soaking as well as potential mechanisms behind the resulting degradation. Particularly, the influence of the spatial atomic layer deposition (SALD) mode, the passivation layer thickness, the properties of the interface between substrate and …
-
Effect of Encapsulation and Light-Soaking on Charge Transport Properties in Organic Semiconductor-Based Diodes
… study also observes the effects of ultra-violet light-soak on these devices. Charge transport dynamics were investigated over a wide time range, and at both microscopic and macroscopic scales. Results from the encapsulated and unencapsulated devices were compared in order to determine the impact …
-
Influence of SiNx/Si interface states on Si solar cells
… Cu/SiN_x/n^+ MOS capacitor both under dark and light illumination is carried out. It is observed that the degradation in solar cell parameters is more when the MOS capacitor is stressed under illumination compared to dark condition. It is also seen that there is a shift in both C-V and G-V …
-
From femtoseconds to minutes, study of charge carrier and mobile ion dynamics in perovskite materials and their micro-scale and macro-scale effects on solar cells
… have been achieved in an operating PSC under light soaking. By analysing current density-voltage characteristic of a complete device and its correlation with its dynamic PL lifetime and intensity under different light soaking conditions, the different scenarios of ion migration and …
-
Investigating degradation pathways in organic solar cell materials
… the atomistic mechanisms of degradation by light-soaking organic films in controlled environment and performing infrared spectroscopy before and after light soaking, to identify bonding changes. Infrared spectroscopy paired with ab-initio theoretical modeling can provide a powerful tool for …
-
Nanoscale Properties of Block Copolymers, Perovskites and Boron Nitride Obtained by Near-field Scanning Optical Microscopy in the Infrared
… of perovskites under high humidity and light soaking was monitored by PFIR, x-ray diffraction and time-of-flight secondary ions mass spectrometry. Lastly, phonon polaritons in hexagonal boron nitride were studied using SNOM. It was found that structures in the boron nitride can …
-
Chemical vapor deposited single layer graphene as transparent electrodes for flexible photovoltaic devices
… with Al fraction of up to 11% were reported. The light-soaking effect can be eliminated by using more than 4% of Al doping. All devices demonstrate PCE over 3.4% with air-stability of over 150 days. The light-soaking mechanism is investigated by employing a numerical simulation on the devices.
-
Desenvolvimento e caracterização de um simulador solar contínuo para módulos fotovoltaicos com traçador de curvas I-V automatizado
… exposição contínua são necessários para ensaios light-soaking em módulos fotovoltaicos comerciais. Esta Tese propõe o desenvolvimento, caracterização e testes de um simulador deste tipo com instrumentação e software capaz de monitorar os parâmetros elétricos do módulo em teste durante o próprio …
-
Understanding the mechanisms of light-induced degradation in crystalline silicon
The boron-oxygen-related light-induced degradation (BO-LID) and light- and elevated temperature-induced degradation (LeTID) are two common types of light-induced degradation (LID) in silicon solar cells that significantly impact performance. Despite years of research for LeTID and decades for …
-
Bottom-Gate TFTs With Channel Layer Deposited by Pulsed PECVD
… mobility, optical band gap, and stability under light-soaking were measured using films of two different thicknesses, 50 nm and 300 nm. From the Raman data we see that the 50 nm films deposited with high hydrogen dilution are mostly amorphous, indicating the presence of a thick incubation layer. …
-
Jonų judėjimas metilamonio švino jodido (MAPI) perovskituose /
… on dynamic performance of perovskite light emitting diode (PeLED). The time-resolved EFISHG investigations were performed by using wide field optical microscope. Furthermore, MAPbI3 perovskite LEDs were investigated by pulsed electrical pumping which enabled to study the influence of …
-
Effect of <em>CdCl<sub>2</sub></em> Treatment on CdTe and CdS Solar Cell Characteristics after Exposure to Light for 1000 Hours
… the changes in device parameters after light soaking for 1000 hours. An automated measurement setup was implemented as part of this thesis work. The main objective of this thesis was to study the effect of CdCl2 heat treatment on the device stability. The temperature for this heat …
-
Stability Studies of CdTe Solar Cells Fabricated With Varying Amounts of Cu in the Back Contact
… The stress tests were conducted in dark and light, at elevated temperatures, and under open circuit and short circuit conditions. The stress analysis was done after 700 hours of light soaking. Degradation in specific parameters like Voc, FF, Rse, Rsh has been noted and an attempt has been …
-
Advancing fully-textured perovskite/silicon tandem solar cells using the hybrid evaporation/wet-chemical route: from crystallization to scalable fabrication
… of residual PbI2), resulting in a reversible light soaking phenomenon. High mobile ion densities and a low activation energy of the light soaking phenomenon are determined, contributing to dynamic changes in device performance. A proof-of-concept is developed in which an increased silicon …
-
Development of procedures for performance measurements and lifetime testing of thin film photovoltaic devices
… freeze cycles, in damp heat, in dry heat and in light soaking. Laser scanning was used to further investigate the observed failure mechanisms after accelerated lifetime testing. The method enables non-destructive determination of position dependent photocurrent throughout the module. It is …
-
Application and analysis of the constant photocurrent method in studies on amorphous silicon and other thin-film semiconductors
… (HWCVD) in a laboratory setup, are subject to light-soaking and annealing and investigated using transient photoconductivity (TPC) and constant photocurrent (CPM) measurements. As a result it is to be found thatthe HWCVD produced material is competitive with the commercially produced PECVD …
-
Characterisation of thin-film semiconductors for device application
… photocurrent and post-transit time of flight measurements on coplanar and pin photovoltaic structures respectively have been interpreted in terms of a multiple trapping transport model. It appears that multiple trapping analysis is applicable to transitional materials, although in highly …
-
Improving the light-induced degradation of hydrogenated amorphous silicon solar cells using fabrication at elevated temperatures and low pressure
… silicon (a-Si:H) solar cells that reduces light-induced degradation via the Staebler-Wronski effect is presented. By using elevated temperatures up to 450°C with chamber pressures down to 25mT, a-Si:H solar cells are fabricated with improved stability. This combination of fabrication …
-
Hole Transport Layer optimization for Methylammonium Lead Iodide Photovoltaic Cell
… than 327 K respectively. Stability tests with light soaking and electrical biasing revealed that the degradation in device performance is indeed reversible due to ion-migration.
-
Metastability and Degradation in Cu(In,Ga)Se2 Thin-Film Solar Cells
… under combinatorial stress factors of heat, light, and voltage bias to systematically understand the effect of buffer layers and PDT. In-situ measurements have been developed to record device characteristics during heat-light soaking (HLS) and potential-induced degradation (PID) tests. …
Page 1 of 3