Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 523 for “"lignite"”.
-
Lignite hydrogasification kinetics
… rates for the hydrogasification of Texas lignite and prepyrolyzed lignite char have been measured using a batch, tubular-flow reactor. Data from experiments performed using moderate heating rates (50-100°C/S) and low operating pressure (0.9 atm) have been collected. These data indicate …
-
Formcoke From Thailand Lignite
… in the laboratory from Thailand and North Dakota lignites with the objective of producing briquets of adequate compressive strength for commercial blast furnace use. Optimum conditions for laboratory scale manufacture were determined.Two lignite samples from the Li Mine, Lamphun Province, …
-
Steam Drying of Lignite
North Dakota lignite, (,-lV x 1") in size and having 35 percent initial moisture content, was steam dried by the Fleissner process at elevated temperatures and pressures. The reduction in moisture content of lignite was investigated as a function of the residence time and the drying temperature. …
-
Pipeline transportation of lignite slurry.
… pressure drop and critical velocity for lignite water slurry flow through a horizontal two inch (nominal) black iron pipe was investigated. The mean slurry velocity ranged from 3 to 7 ft/s, and the range of solid concentration investigated was from 0 to 25 percent (wt.). The experiment …
-
Sintering Characteristics of Lignite Ash
… relationship of the sintering characteristics of lignite ash to the known fouling tendency of the ash was investigated. The investigation includes the determination of the temperature at which sintering begins and the correlation of fouling tendency of the ash to the compressive strength developed …
-
The Fluidized Drying of Lignite
… was designed and constructed for drying of lump lignite. The fluidised Led was 2 ft. long, 0.5 ft. wide and 1 ft. deep. The support was a grid of 1/2 in. steel rods with 1/4 in. clearance between them. Hot coiubustion gases war© used to fluidize and. dry the lignite, and a superficial gas …
-
Microreactor Studies of Lignite Liquefaction
… effects of staged heating on the liquefaction of lignite was conducted using 20 ml. microreactors heated in a fluidized sandbath. One gram of moisture-ash-free lignite, two grams of hydrogenated anthracene oil solvent and synthesis gas (carbon monoxide and hydrogen) at an initial pressure of 1200 …
-
Autoclave Studies of Lignite Liquefaction
… at reaction temperature on the liquefaction of lignite using hydrogen or synthesis gas was studied. A slurry contain ing 200 grams of moisture-ash-free (MAF) lignite, 100 grams of water, and 400 grams of hydrogenated anthracene oil solvent was fed into the University of North Dakota …
-
Montana coal and lignite deposits
Abstract not available
-
Removal of sulfur dioxide and nitric oxide by lignite and various other lignite-derived adsorbents
… was to develop an adsorbent from Saskatchewan lignite that is efficient for the removal of sulfur dioxide (SO2) and nitric oxide (NO) from flue gases and, also, to develop the models for their removal processes. The development of the adsorbents was achieved by optimizing a number of adsorbent …
-
Aqueous alkaline liquefaction of Texas lignite
Small particles of Texas lignite, Wilcox formation, were reacted with 0.5 and 0.25N solutions of sodium hydroxide in a two-liter batch reactor. The reaction times varied from 1 to 8 hours and were carried under an autogeneous pressure. Temperature levels of 100, 130 and 160°C were used. Maximum …
-
Plant Microfossils from the Bruhn Lignite
… study of fossil pollen and spores isolated from lignites and lignitic clays from West Tennessee. The wealth of such materials available for collection, and their widespread geologic occurrence made systematic organization of the total study essential. Consequently, the decision was made to select …
-
The basic components of lignite tar
… basic (nitrogenous) components in Saskatchewan lignite tar as obtained by the Parry process of low temperature carbonization. A fraction of the tar bases was separated from the crude tar by steam distillation followed by acid extraction. Vapour phase chromatography and infrared spectroscopy were …
Page 1 of 27