Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"line scan camera"”.

  1. Line scan camera calibration for fabric imaging

    … of detection result. To our knowledge, most of camera lenses have radial distortion. So our goal in this project is to remove the radial distortion and achieve undistorted images. Much research work has been done for 2-D image correction, but the study for 1-D line scan camera image correction …

    texas Repository record for Line scan camera calibration for fabric imaging (opens in a new tab)

  2. Implementation of a Line-Scan Camera Triangulation Sensor for a Ball Balancer

    … the position and velocity of the ball. Using two line-scan cameras, the ball is located by triangulation without direct contact.

    calpoly Repository record for Implementation of a Line-Scan Camera Triangulation Sensor for a Ball Balancer (opens in a new tab)

  3. The effect of nonlinearity in robotic vision systems

    … thesis, an application of generic approach to nonlinear image processing is described which is implemented in real-life application. Consideration is given to the general geometrical resampling process in which output pixels are estimated by interpolation of input pixels. However, here the …

    ttu Repository record for The effect of nonlinearity in robotic vision systems (opens in a new tab)

  4. A machine vision system for classifying rectangular cabinet frames

    … system that utilizes backlighting and a line scan camera. Several corner detection methods are compared and a mathematical formulation of frame comparison is given. A fast database search technique is also presented. The laboratory system has been successfully tested with a set of 27 …

    vt Repository record for A machine vision system for classifying rectangular cabinet frames (opens in a new tab)

  5. The development of a system of automatic inspection for surface material defects

    … selected as appropriate. Opto-electronic scanners are discussed and a linear solid-state photodiode array incorporated in a line scan camera is chosen as a promising solution. The use of this device is described, including : illumination,optics,analogue and digital electronic processing, …

    aston Repository record for The development of a system of automatic inspection for surface material defects (opens in a new tab) Download PDF for The development of a system of automatic inspection for surface material defects (opens in a new tab)

  6. Development of an in-field tree imaging system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology at Massey University

    … images are captured and analysed using the "TreeScan" in-field tree imaging system. This thesis describes the design, development, and evaluation of the TreeScan system. The thesis can also be used as a technical reference for the system and as such contains appropriate technical and design …

    massey Repository record for Development of an in-field tree imaging system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology at Massey University (opens in a new tab)

  7. Complementary imaging for pavement cracking measurements

    … aimed to develop a new imaging system that can scan pavement surface at highway speed and determine the severity level of pavement cracking without using any artificial lighting. The new system consists of dual line-scan cameras that are installed side by side to scan the same pavement area as …

    texas Repository record for Complementary imaging for pavement cracking measurements (opens in a new tab)

  8. Development of Single-Chip Silicon Photonic Microcantilever Arrays for Sensing Applications

    … microcantilever readout with an InGaAs line scan camera. A 16-microcantilever array is fabricated and measured. Use of a scaled differential signal yields reasonable correspondence of the signals from 7 surviving released microcantilevers in the array. The average sensitivity is 0.23 …

    byu Repository record for Development of Single-Chip Silicon Photonic Microcantilever Arrays for Sensing Applications (opens in a new tab) Download PDF for Development of Single-Chip Silicon Photonic Microcantilever Arrays for Sensing Applications (opens in a new tab)

  9. Cutting Tool Wear: Data Acquisition and Automation of Wear Measurements on End Mills

    … mills using computer vision. The method uses a line scan camera and rotates the end mill to collect an image of the entire tool circumference. A two-step approach was then used to analyze the images, the first stage used a Mask R-CNN model to identify the worn areas. After that, the worn area …

    chalmers Repository record for Cutting Tool Wear: Data Acquisition and Automation of Wear Measurements on End Mills (opens in a new tab)

  10. 3D rekonstrukce za pomoci řádkových kamer

    V této práci byla navržena a otestována metoda pro 3D rekonstrukci těles s použitím řádkových kamer. Metoda byla testována v simulovaném prostředí MATLAB i na měřícím stanovišti v laboratoři na navržených kalibrech. Zahrnuje zpracování vstupních i výstupních dat, kalibraci potřebných vnějších i …

    brno-tech Repository record for 3D rekonstrukce za pomoci řádkových kamer (opens in a new tab)

  11. Kompenzace zkreslení vzniklých pohybem objektů snímaných řádkovou kamerou

    Tato diplomová práce se zaměřuje na kompenzaci zkreslení v datech ještěrek získaných pomocí řádkové skenovací kamery (LSC), která snímá ultrafialové (UV) vlnové délky. Dýchací pohyby během skenování způsobují zkreslení šířky trupu ještěrky, což ovlivňuje konečný snímek LSC. Práce navrhuje metody …

    brno-tech Repository record for Kompenzace zkreslení vzniklých pohybem objektů snímaných řádkovou kamerou (opens in a new tab)

  12. Detekce vad potisku

    Tato práce se zabývá návrhem a realizací zařízení pro vizuální kontrolu potisku loga na propiskách. Ke snímání objektu je využito řádkové kamery. Řízení celé jednotky a zpracování pořízených dat zajišťuje mikropočítač Raspberry Pi 4, ke kterému je vytvořena rozšiřující deska pro ovládání periferií. …

    brno-tech Repository record for Detekce vad potisku (opens in a new tab)

  13. HDR (high dynamic range) snímání s řádkovou kamerou

    Bakalářská práce se zabývá návrhem systému pro řízení řádkových kamer, který umožňuje záznam HDR snímků. Práce nejprve seznamuje s řádkovými kamerami a principem HDR snímání. Následuje návrh řídicího systému a vysvětlení funkcionality jednotlivých signálů a rozhraní. Dále budou vybrány komponenty a …

    brno-tech Repository record for HDR (high dynamic range) snímání s řádkovou kamerou (opens in a new tab)

  14. Spolehlivé systémy zpracování obrazu

    V této disertační práci je na příkladech reálných zařízení podrobně ukázán postup návrhu spolehlivých průmyslových vizuálních systémů. Zvláštní pozornost je věnována systému pro detekci vad na pásech nekonečné výroby s využitím řádkových kamer. Systém umožňuje detekci a klasifikaci vad vznikajících …

    brno-tech Repository record for Spolehlivé systémy zpracování obrazu (opens in a new tab)

  15. Peer-to-peer navigation concepts for computer-assisted medical interventions

    … and medical settings consist of either a stereo camera or a line-scan camera within the central tool-tracking unit. These systems require an uninterrupted view of the involved active or passive tracked tools to generate transformations. If a person, object, or the navigation system itself causes …

    freiburg-diss Repository record for Peer-to-peer navigation concepts for computer-assisted medical interventions (opens in a new tab)

  16. Autonomní mobilní robot

    Tato práce se zabývá návrhem a realizací podvozku pro autonomní kolový mobilní robot spolu s návrhem vhodného řídicího systému. Pro pohyb robotu bylo třeba vytvořit jednotlivé moduly pro měření okolních dat, jejich následné zpracování a výkonové řízení. Aby byl celý systém robotu schopen rychlé …

    brno-tech Repository record for Autonomní mobilní robot (opens in a new tab)

  17. Přípravek pro snímání muzejní sbírky kraslic

    Tato diplomová práce se zabývá návrhem a realizací přípravku pro snímaní muzejní sbírky kraslic. Ke snímání kraslic je využito monochromatické řádkové kamery v kombinaci s RGB osvětlením a krokovým motorem. Řízení celého přípravku je řešeno pomocí mikrokontroleru Arduino Mega v kombinaci s …

    brno-tech Repository record for Přípravek pro snímání muzejní sbírky kraslic (opens in a new tab)

  18. Nové technologie pro biometrické rozpoznání na základě charakteristik ruky

    Biometrie nám umožňuje identifikovat či verifikovat osoby na základě jejich fyzických vlastností. Přestože identifikace samotná je velmi rychlá, extrakce zvolené biometrie v reálném světě je netriviální problém. Pro snímání většího množství lidí, například na letišti, potřebujeme dosáhnout snímání …

    brno-tech Repository record for Nové technologie pro biometrické rozpoznání na základě charakteristik ruky (opens in a new tab)