Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 65 for “"liquid injection"”.

  1. Streaming Effects in Liquid Injection Rocket Engines with Transverse Mode Oscillations

    … of wave interactions in a simulated liquid rocket engine with uniform injection imposed at the faceplate. Of significant interest are the secondary nonlinear flows, particularly acoustic streaming, induced by transverse wave impingement over the engine injector surface. The …

    utk-theses Repository record for Streaming Effects in Liquid Injection Rocket Engines with Transverse Mode Oscillations (opens in a new tab)

  2. Temperature Inside The Landfill: Effects Of Liquid Injection And Ambient Temperature

    … of the study was the analysis of effects of the liquid injection on the temperature inside the landfill. When the leachate or groundwater at lower temperature than the landfilled waste is injected into the landfill, it has an initial cooling effect on the waste until the biological activity, …

    ucf Repository record for Temperature Inside The Landfill: Effects Of Liquid Injection And Ambient Temperature (opens in a new tab)

  3. Novel precursors for the growth of TiO2 by liquid injection MOCVD

    … films on un-doped siliconand glass substrates by Liquid Injection Metal Organic Chemical Vapor Deposition.The effects of varying a wide range of deposition conditions has been studied using insitu monitoring by interferometry and ex-situ analysis using X-ray diffraction (XRD),scanning electron …

    salford Download PDF for Novel precursors for the growth of TiO2 by liquid injection MOCVD (opens in a new tab)

  4. Direct liquid injection metalorganic chemical vapor deposition of ferroelectric PZT films

    A direct liquid injection (DLI) metalorganic chemical vapor deposition (MOCVD) technique was devised to deposit ferroelectric lead zirconate titanate (PZT) films for the first time. By utilizing a cheap DLI precursor delivery system, the problems encountered in the conventional precursor delivery …

    vt Repository record for Direct liquid injection metalorganic chemical vapor deposition of ferroelectric PZT films (opens in a new tab)

  5. Droplet size measurements for liquid streams injected into a low-pressure chamber using a light transmission technique

    … optical investigation of the sprays produced by liquid injection into a vacuum using various nozzle orifice sizes and driving pressures. A light transmission technique was employed to measure the mean diameter of the droplets in acetone sprays. Independent calculation of the densities of the …

    nps Repository record for Droplet size measurements for liquid streams injected into a low-pressure chamber using a light transmission technique (opens in a new tab)

  6. Experimental Study and Modeling of Gas Trapping in Foam Flow in Porous Media Using a Gas Tracer Technique

    … and reduce gas fingering/channeling in gas injection. Gas trapping is a crucial component of foam mobility and diversion for successful foam applications. This dissertation was aimed at a better understanding of gas trapping in foam flow and evaluating the accuracy of the existing gas tracer …

    texas Repository record for Experimental Study and Modeling of Gas Trapping in Foam Flow in Porous Media Using a Gas Tracer Technique (opens in a new tab) Restricted access

  7. Theoretical and experimental study of foam for enhanced oil recovery and acid diversion

    … is an experimental investigation of post-foam liquid injection, which is the key to the success of foam-acid diversion for matrix-acid well stimulation. Results indicate that with high foam quality pressure gradient can be higher during liquid injection than during foam injection; this may …

    texas Repository record for Theoretical and experimental study of foam for enhanced oil recovery and acid diversion (opens in a new tab)

  8. Studies in efficiency of the air-stream atomization phenomena

    … unit (which also could be used for solid-injection atomisation) consisted of a glass convergent air nozzle with a short straight section and a concentric hypodermic tube for the purpose of water injection. The purpose of the investigation was to determine the effect upon the efficacy and …

    iastate Repository record for Studies in efficiency of the air-stream atomization phenomena (opens in a new tab)

  9. Growth and applications of carbon nanotube-based nanosponge sheets

    … research results from Gui et al. [1], via liquid-injection chemical vapor deposition, an unexpected result was recorded-instead of growing a carbon nanotube sponge on the sample slide as expected, a thin, paper-like film was discovered on the furnace sidewalls. This material was found to …

    hawaii Repository record for Growth and applications of carbon nanotube-based nanosponge sheets (opens in a new tab)

  10. Pulsed Injection System for Enhanced Treatment Delivery of In Situ Soil and Groundwater Remediation Systems

    … the comparison of the effects of a direct push liquid injection treatment with a pulsing injection system. The results of both the field-level and laboratory testing suggested that the pulsed injection technology was more effective in delivering treatments into the subsurface and enabling a …

    calgary Repository record for Pulsed Injection System for Enhanced Treatment Delivery of In Situ Soil and Groundwater Remediation Systems (opens in a new tab)

  11. CFD simulation of two- and three-phase flow in FCC reactors

    Liquid distribution and evaporation in Fluid Catalytic Cracking (FCC) reactors are investigated numerically. The well-documented inaccuracy of conventional two-fluid modeling of hydrodynamics in fluidized beds of Geldart Group A particles is revisited. A new force-balance (FB) sub-grid-scale model, …

    ubc Repository record for CFD simulation of two- and three-phase flow in FCC reactors (opens in a new tab) Download PDF for CFD simulation of two- and three-phase flow in FCC reactors (opens in a new tab)

  12. Numerical modeling of gas-liquid flows in a swirl nozzle

    … (CFD) methods are utilized to investigate liquid injection and atomization processes in industrial context. The two-phase flows are solved using the volume-of-fluid (VOF) method utilizing a sharp interface capturing framework. The work is motivated by high-viscosity, biomass-based renewable …

    aalto Repository record for Numerical modeling of gas-liquid flows in a swirl nozzle (opens in a new tab)

Page 1 of 4