Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 75 for “"liquid phase sintering"”.
-
Liquid phase sintering of Al₂O₃/SiC composites
Includes bibliographical references.
-
Mechanisms of liquid-phase sintering in Fe-Cu mixtures
… were: a) the effect of solid-state presintering the compacts, b) copper content, c) particle size, d) initial compact density and e) the heating rate through the melting temperature. Five different processes causing dimensional change were identified. Three contraction processes …
-
High Density supersolidus liquid phase sintering of steel powders
In this study, supersolidus liquid phase sintering (SLPS) of an industrially relevant Fe-C-Mo alloy powder was investigated with particular attention to the evolution of density and porosity. The material was produced by mixing graphite with a prealloyed Fe-Mo alloy. Differential Scanning …
-
Transient Liquid Phase Sintering and Joining of Lanthanum Calcium Ferrite
… temperatures and pressures. A novel transient liquid phase (TLP) method has been applied to sintering and joining La1-xCaxFeO3. The sintering behavior of cold pressed pellets with compositions La0.9Ca0.lFeO3 and La0.75Ca0.25FeO3 was studied using an isothermal method at temperatures up to …
-
In-situ measurements of the Liquid-Phase Sintering of Zinc Oxide
… is the basic system for ceramic varistors. Phase formation during sintering of ZBS was measured in situ, using 1 mm thick samples and synchrotron X-rays. Thermodynamic calculations were performed to explain phase formation, composition, stability of additive oxides and influence of the …
-
Bi and Pbo addition and liquid phase sintering of Y-Ba-Cu-O compound
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics and Material Science, 1990
-
MESOSCALE MICROSTRUCTURE EVOLUTION, RELIABILITY AND FAILURE ANALYSIS OF HIGH TEMPERATURE TRANSIENT LIQUID PHASE SINTERING JOINTS
… temperature joining techniques, such as solid phase sintering and Transient Liquid Phase Sintering (TLPS), for producing high temperature stable attachments. TLPS is an emerging electronic interconnect technology enabling the formation of high temperature robust joints between metallic surfaces …
-
Nd2Fe14B: (Nd1-x Dyx)2 Fe14B CORE-SHELL STRUCTURE FORMATION BY HOT PRESS LIQUID PHASE SINTERING
… Nd rich core-Dy rich shell grain structure in liquid phase sintered alloys by consolidating Dy rich powder mixed with powder. The technical barrier to producing the core-shell microstructure is that the Dy composition variations will homogenize during the consolidation process. This …
-
Liquid Phase Sintering of Heterophasic Dielectrics in the System Barium-Titanate - Lead(5)germanium(3)oxygen(11)
Made available in DSpace on 2014-12-14T15:24:01Z (GMT). No. of bitstreams: 1 7804109.pdf: 4785631 bytes, checksum: bb3164dc9f74d567c8520d7af5b5500d (MD5) Previous issue date: 1977
-
Development of a Shifting Melting Point Ag-In Paste Via Transient Liquid Phase Sintering for High Temperature Environments
… - indium (In) solder paste that uses a Transient Liquid Phase Sintering (TLPS) process was developed. This novel material and manufacturing process constitutes a major advancement over the conventional soldering process temperature hierarchy, in which the maximum allowable application temperature …
-
A feasibility study of liquid phase sinter forming of a model ceramic system by Roland Charles Roeder.
… in which net shaped products are produced via sintering and simultaneously deforming is studied. A suitable model system of SiO2-B2O3 is chosen due to its desirable properties for liquid phase sintering and its ability to be tested under atmospheric conditions. Samples of compacted powder are …
-
A feasibility study of liquid phase siinter forming of a model ceramic system
… in which net shaped products are produced via sintering and simultaneously deforming is studied. A suitable model system of SiO2-B2O3 is chosen due to its desirable properties for liquid phase sintering and its ability to be tested under atmospheric conditions. Samples of compacted powder are …
-
Phasenbeziehungen und kinetische Modellierung von flüssigphasengesintertem SiC mit oxidischen und nitridischen Additiven
… formation of surface layers developing during liquid phase sintering of silicon carbide are studied. The focus is on the additive systems Al2O3 plus Y2O3 and AlN plus Y2O3. Phase and especially liquid phase formation in both of the systems SiC, Al2O3 , Y2O3 and AlN, Al2O3 , Y2O3 are …
-
Design and processing of low alloy high carbon steels by powder metallurgy. P/M processing and liquid phase sintering of newly designed low-alloy high carbon steels based on Fe-0.85Mo-C-Si-Mn with high toughness and strength.
… ThermoCalc modelling was employed to predict liquid phase amounts for two different powder grades, Astaloy 85Mo or Astaloy CrL with additive elements such as (0.4-0.6wt%)Si, (1.2-1.4wt%)C and (1-1.5wt%)Mn, in the sintering temperature range 1285-1300ºC and such powder mixes were pressed and …
-
Flash Sintering of Alumina-based Ceramics
Flash sintering is an electrical field-assisted consolidation technology and represents a very novel technique for producing ceramic materials, which allows to decrease sensibly both processing temperature and time. Starting from 2010, when flash sintering was discovered, different ceramic …
-
SODIUM METAL SOLID-STATE BATTERY BASED ON NASICON ELECTROLYTE
Instead of using organic-based liquid electrolyte, all-solid-state batteries using a solid-state electrolyte can enhance the safety, longer cycle life and energy density of the system. Being non-flammable and has wide electrochemical stable window, NASICON electrolyte is one of the strong …
Page 1 of 4