Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"live load distribution"”.

  1. Live load distribution factors for glued-laminated timber bridges

    … with the objective of determining how truckloads are distributed to the structural members of glued-laminated timber bridges. Glued-laminated timber girder bridges with glued-laminated timber deck panels and longitudinal glued-laminated timber deck bridges were the focus of this paper. …

    iastate Repository record for Live load distribution factors for glued-laminated timber bridges (opens in a new tab)

  2. Live load distribution factors for exterior girders in steel I-girder bridges

    In lieu of a complex three-dimensional analysis, live load distribution factors (also referred to as girder distribution factors or wheel load distribution factors) are commonly employed by bridge engineers to simplify the analysis of a bridge system. Specifically, instead of looking at the bridge …

    wvu Repository record for Live load distribution factors for exterior girders in steel I-girder bridges (opens in a new tab)

  3. Assessment of live load distribution characteristics of press-brake-formed tub girder superstructures

    … thesis project was to refine the development of live load distribution factors for tub girders. This was done in three stages. First, experimental data was gathered to assess live load distribution on the Amish Sawmill Bridge located in Fairbank, Iowa. Then, finite element analysis models were …

    marshall Repository record for Assessment of live load distribution characteristics of press-brake-formed tub girder superstructures (opens in a new tab)

  4. Live Load Distribution Factors and UHPC Shear Key Performance of SCDOT NEXT-D Beam

    … shear key cracking within their intended design lives. This leads to a decrease in the transverse load sharing capabilities of these sections. Shear key cracking also leads to reflective cracks developing on the bridge deck, which allows water and other corrosive agents access to the girder …

    clemson Repository record for Live Load Distribution Factors and UHPC Shear Key Performance of SCDOT NEXT-D Beam (opens in a new tab)

  5. Live load distribution factors for multi-span girder bridges with plank decking subjected to farm vehicles

    … provide simplified formulae to determine Live Load Distribution Factors (LLDFs) for highway bridges. The formulae for the AASHTO code-specified LLDFs have been developed, considering the effect of typical highway trucks. In addition to highway bridges, there are a large number of bridges …

    iastate Repository record for Live load distribution factors for multi-span girder bridges with plank decking subjected to farm vehicles (opens in a new tab)

  6. Live Load Distribution Factors and UHPC Shear Key Performance of SCDOT NEXT D Beam and Solid Slab Bridges

    … to a decreased ability for a bridge to share load among its adjacent members. Both hollow core and solid slab sections are designed to distribute load transversely across the bridge and longitudinally to the girder bearings. Individual girders resist only a portion of the loads on a bridge. If …

    clemson Repository record for Live Load Distribution Factors and UHPC Shear Key Performance of SCDOT NEXT D Beam and Solid Slab Bridges (opens in a new tab)

  7. Development and Validation of Improved Live Load Distribution Factors for Moment in Press-Brake-Formed Steel Tub Girder Bridges

    … the design and analysis of PBFTGs regarding live load distribution factor (LLDF) prediction. Field testing performed on PBFTG bridges showed that the empirical equations found in the American Association of State Highway and Transportation Officials’ Load and Resistance Factor Design Bridge …

    wvu Repository record for Development and Validation of Improved Live Load Distribution Factors for Moment in Press-Brake-Formed Steel Tub Girder Bridges (opens in a new tab)

  8. Simplified live-load moment distribution factors for simple span slab on I-girder bridges

    … identify and assess various methods of computing live load distribution factors and to use the results of laboratory and field tests to compare these methods. It is further a goal of this work to use these methods to perform a parametric study over a wide range of typical slab on steel I-girder …

    wvu Repository record for Simplified live-load moment distribution factors for simple span slab on I-girder bridges (opens in a new tab)

  9. Slab-on-girder prestressed concrete bridges: linear and nonlinear finite element analysis and experimental load tests

    … bridge, are thought to contribute to the overall distribution of live loads in bridges. Cast-in-place concrete intermediate diaphragms were investigated in this study in order to assess their load distribution effectiveness in prestressed concrete I-girder bridges. Finite element packages (Ansys …

    lsu-thes Repository record for Slab-on-girder prestressed concrete bridges: linear and nonlinear finite element analysis and experimental load tests (opens in a new tab)

  10. Performance evaluation and finite element verification of an ultra-high performance concrete pi-girder bridge

    … are examined, and the results of laboratory and live load testing are presented to quantify behavior. The effectiveness of the finite element analysis, structural performance of the bridge, including live load distribution, is evaluated to provide guidance for future designs employing these …

    iastate Repository record for Performance evaluation and finite element verification of an ultra-high performance concrete pi-girder bridge (opens in a new tab)

  11. Live-Load Test and Computer Modeling of a Pre-Cast Concrete Deck, Steel Girder Bridge, and a Cast-in-Place Concrete Box Girder Bridge

    … a pre-cast concrete deck, steel girder bridge. A live-load test was performed under the directions of Bridge Diagnostic Inc (BDI) and Utah State University. Six different load paths were chosen to be tested. The recorded data was used to calibrate a finite-element model of this superstructure, …

    utahstate Repository record for Live-Load Test and Computer Modeling of a Pre-Cast Concrete Deck, Steel Girder Bridge, and a Cast-in-Place Concrete Box Girder Bridge (opens in a new tab)

  12. Bridge Rating Based on In-Situ Weigh-In-Motion and Health Monitoring Data

    … changes from the Allowable Stress Design to the Load Factor Design, and then to the reliability based Load and Resistance Factor Design (LRFD), bridge load rating method has also been evolving. Applying the reliability theory to the bridge load rating is more complex than applying to the LRFD …

    lsu-thes Repository record for Bridge Rating Based on In-Situ Weigh-In-Motion and Health Monitoring Data (opens in a new tab)

  13. Modeling and Analysis of the DuPont Access Bridge

    <p>This thesis evaluates the lateral wheel load distribution on a two-span experimental highway bridge, examines the continuity of the superstructure over the center pier, and investigates the connection between bridge girders and abutments. Simplified finite element models of the bridge …

    ut-knoxville Repository record for Modeling and Analysis of the DuPont Access Bridge (opens in a new tab)

  14. Expanding the Applicability of Press-Brake-Formed Tub Girders Through the Extension of the Maximum Span Length and the Evaluation of Pier Continuity

    … of State and Highway Transportation Officials Load Resistance and Factor Design Bridge Design Specifications’ (AASHTO LRFD BDS) Live Load Distribution Factors (LLDFs). The specifications limit the use of PBFTGs outside of these scenarios, despite the expectation they would perform well in a …

    wvu Repository record for Expanding the Applicability of Press-Brake-Formed Tub Girders Through the Extension of the Maximum Span Length and the Evaluation of Pier Continuity (opens in a new tab)

  15. Live Load Test and Finite Element Model Analysis of a Box Girder Bridge for the Long Term Bridge Performance Program

    … due to environmental variables and vehicle loads. Part of this program includes the periodic testing of selected bridges. The Lambert Road Bridge was subjected to nondestructive testing in the fall of 2009. Part of this testing included a live load test. This test involved driving two heavy …

    utahstate Repository record for Live Load Test and Finite Element Model Analysis of a Box Girder Bridge for the Long Term Bridge Performance Program (opens in a new tab)

  16. Field testing of multiple span railroad flatcar bridges on low volume roads

    … Bridge Design Standard Specification. Transverse live load distribution characteristics were determined by grillage analysis and verified by live load deflection data from field tests. A simplified design procedure was developed for multiple span RRFC bridges to assist in the design of future …

    iastate Repository record for Field testing of multiple span railroad flatcar bridges on low volume roads (opens in a new tab)

  17. Load Testing Deteriorated Spans of the Hampton Roads Bridge-Tunnel for Load Rating Recommendations

    … Virginia coast has taken its toll on the main load carrying girders. Concrete spalling has exposed prestressing strands within the girders allowing corrosion to spread. Some of the more damaged girders have prestressing strands that have completely severed due to the extensive corrosion. The …

    vt Repository record for Load Testing Deteriorated Spans of the Hampton Roads Bridge-Tunnel for Load Rating Recommendations (opens in a new tab)

  18. Field Evaluation of a Modular Press-Brake-Formed Steel Tub Girder in an Application that Includes Skew and Superelevation

    … traveled to the bridge site to perform a live load field test. This study presents the results and evaluation from experimental and analytical testing of the Fourteen Mile Bridge. Additionally, the research methods for both the experimental and analytical testing are outlined. Live load …

    wvu Repository record for Field Evaluation of a Modular Press-Brake-Formed Steel Tub Girder in an Application that Includes Skew and Superelevation (opens in a new tab)

  19. Field Performance Assessment of Press-Brake-Formed Steel Tub Girder Superstructures

    … University traveled to Iowa to perform a live load field test.;This thesis presents the results and assessment from experimental and analytical testing of the Amish Sawmill Bridge. Furthermore, an overview of both the experimental and analytical testing programs is provided. This thesis …

    wvu Repository record for Field Performance Assessment of Press-Brake-Formed Steel Tub Girder Superstructures (opens in a new tab)

  20. Truck Platoon Impacts on Prestressed Concrete Girder Bridges

    … which offers empirical equations to estimate the live load distribution factor (Ft), may not be adequate for autonomous vehicles, especially regarding lane width requirements. The goal of this study is twofold: first, assess the performance of prestressed concrete girder bridges under truck …

    mcmaster Repository record for Truck Platoon Impacts on Prestressed Concrete Girder Bridges (opens in a new tab)

Page 1 of 2