Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 316 for “"load cases"”.

  1. Defining and Evaluating New Load Cases in Autonomous Cars

    … with Autoliv and aims to define new potential load cases in fully automated cars and to evaluate how today’s passive safety systems handle these new load cases. A literature review were complemented with a qualitative study to understand what activities occupants expect they will be engaged in …

    chalmers Repository record for Defining and Evaluating New Load Cases in Autonomous Cars (opens in a new tab)

  2. Topology optimization with multiple materials, multiple constraints, and multiple load cases

    … many materials, many constraints, and many load cases. Most work in topology optimization is restricted to linear material with limited constraint settings for multiple materials. To address these issues, we propose a general multi-material topology optimization formulation with material …

    gatech Repository record for Topology optimization with multiple materials, multiple constraints, and multiple load cases (opens in a new tab)

  3. Numerical Heat Transfer Simulations of Brake Discs under Dyno-Test Load Cases

    Automotive brake discs are critical safety components whose performance heavily relies on efficient thermal dissipation. Yet, conventional laboratory dynamometer testing remains costly and time-consuming. To address this challenge, this study establishes a reliable CFD methodology to simulate and …

    chalmers Repository record for Numerical Heat Transfer Simulations of Brake Discs under Dyno-Test Load Cases (opens in a new tab)

  4. Piezoresistivity Characterization of Polymer Bonded Energetic Nanocomposites under Cyclic Load Cases for Structural Health Monitoring Applications

    … and microscopic strain regimes of mechanical loading for each material system, as well as under ten cycles of applied compressive loading within those same strain regimes. Gauge factors were calculated to quantify the magnitude of strain and damage sensing in MWCNT-enhanced material systems. …

    vt Repository record for Piezoresistivity Characterization of Polymer Bonded Energetic Nanocomposites under Cyclic Load Cases for Structural Health Monitoring Applications (opens in a new tab)

  5. Direct Design for Multiple Load Cases: Reinforced and Partially Prestressed Concrete Beams Under Combined Bending and Torsional Loads

    … multiple combinations of bending and torsional loads. The beams were idealised as hollow beams with the walls in a state of plane stress. Elastic stress field at ultimate load in conjuction with a yield criterion was used to obtain the required quantities of reinforcement. The type of yield …

    glasgow Download PDF for Direct Design for Multiple Load Cases: Reinforced and Partially Prestressed Concrete Beams Under Combined Bending and Torsional Loads (opens in a new tab)

  6. Behaviour of pseudo-ductile thin-ply angle-ply laminates under different loading conditions

    … previously shown pseudo-ductility in tensile loading, have been experimental investigated under several different load cases. These include open-hole tension, compression, bending, fatigue loading and bearing loading, since the design of carbon fibre composite structures is often limited by …

    bristol Repository record for Behaviour of pseudo-ductile thin-ply angle-ply laminates under different loading conditions (opens in a new tab) Download PDF for Behaviour of pseudo-ductile thin-ply angle-ply laminates under different loading conditions (opens in a new tab)

  7. Topology Optimization of Electric Motor Installation

    … which is subjected to a wide range of complex loads, from loads caused by extreme driving conditions to crash loads, is no easy task. In the highly competitive automotive industry, reducing weight while retaining performance is a big priority. This thesis has investigated topology optimization …

    chalmers Repository record for Topology Optimization of Electric Motor Installation (opens in a new tab)

  8. Study of steering effects. Virtual testing of front suspension of heavy trucks.

    … induced steer angle due to bump, brake and roll load cases. Our approach has been to develop and enhance the load cases of the considered steering effects. The load case representing roll has been broken down into separate parts in order to make the analysis easier. The in-dept analysis of the …

    chalmers Repository record for Study of steering effects. Virtual testing of front suspension of heavy trucks. (opens in a new tab)

  9. Structural analysis of SLICE hulls

    … the SLICE structure was exposed to six different load cases. Each load case represents a different wave to hull angle interaction. Three cases were subjected to sea state 5, and the last three cases were exposed to sea state 8. Since the SLICE lacks the continuous underwater hull that offers the …

    nps Repository record for Structural analysis of SLICE hulls (opens in a new tab)

  10. Stresses in a circular disc containing a radial crack

    … strain or generalized plane stress, which is loaded quite generally at the perimeter by a set of self equilibrating forces. The disc has a radial crack extending completely from the centre to the perimeter. Three particular load cases are considered: the disc is loaded by uniform radial …

    ubc Repository record for Stresses in a circular disc containing a radial crack (opens in a new tab) Download PDF for Stresses in a circular disc containing a radial crack (opens in a new tab)

  11. Dynamic measurements with a luminescent photoelastic coating

    … of the technique, specifically cyclic-load cases as the image intensity is too low for the camera to accurately capture transient-load cases. The dynamic tests involved bar specimens and square-tube specimens loaded at 1 Hz and 10 Hz. Instead of continuous excitation, strobed excitation …

    alabama Repository record for Dynamic measurements with a luminescent photoelastic coating (opens in a new tab)

  12. Structural Analysis of Support Structures for Industrial Cooking Pans A Finite Element Study of the GS23 Series

    … structural stability under representative static load cases. Two support structure variants were considered, corresponding to pan sizes of 150-300 L and 50- 100 L, respectively. The results show that both structures are conservatively dimensioned, with all stress levels remaining below the …

    chalmers Repository record for Structural Analysis of Support Structures for Industrial Cooking Pans A Finite Element Study of the GS23 Series (opens in a new tab)

  13. Design of a Weight-Optimized Gearbox for a Formula Student Car

    … Then a method for deriving the dimensioning load cases for the gears, bearings and gearbox housing is developed by translating sensor data from competition to resulting forces. The load cases are then used for dimensioning the gears with the gear dimensioning software KISSsoft and for stress …

    chalmers Repository record for Design of a Weight-Optimized Gearbox for a Formula Student Car (opens in a new tab)

  14. The design of an aluminium alloy wheel using three dimensional finite element analysis and fatigue life prediction

    … the behaviour of the wheel under it's working load conditions. IDEAS Master Series has been used to develop a three dimensional linear elastic structural model. The wheel has been loaded with static load cases which represent the working load conditions. Maximum and minimum principal stresses …

    dcu Download PDF for The design of an aluminium alloy wheel using three dimensional finite element analysis and fatigue life prediction (opens in a new tab)

  15. Coupled Electric and Magnetic Circuit Analysis Using Finite Elements

    … examined which has a 1 to 1 turns ratio. Three load cases are considered for the transformer system; (a) no-load, (b) linear load, and (c) single phase half-wave rectifier. Both linear and nonlinear magnetic analyses are performed for the three transformer load cases. The transformer system for …

    marquette Repository record for Coupled Electric and Magnetic Circuit Analysis Using Finite Elements (opens in a new tab)

  16. Experimental and modeling study of the filtration and oxidation characteristics of a diesel oxidation catalyst and a catalyzed particulate filter

    … particulate matter (PM) change as functions of loading time. In order to understand the solid PM loading characteristics in the CPF, an experimental and modeling study was conducted using emissions data measured from the exhaust of a John Deere 6.8 liter, turbocharged and after-cooled engine …

    mtu Repository record for Experimental and modeling study of the filtration and oxidation characteristics of a diesel oxidation catalyst and a catalyzed particulate filter (opens in a new tab)

  17. Performance envelopes for preliminary sizing of aircraft structures

    … stages within aerospace structural design are loads development and sizing. The first deals with the development of all the load cases that an aircraft may encounter in service, whereas the latter is responsible for the design of the structural components required to carry the predicted …

    qu-belfast Repository record for Performance envelopes for preliminary sizing of aircraft structures (opens in a new tab) Download PDF for Performance envelopes for preliminary sizing of aircraft structures (opens in a new tab)

  18. Estudo da curvatura residual aplicada ao problema da compressão dinâmica em risers rígidos em catenária livre

    … the FPSO excitation under extreme environmental loads. To do so, a load cases matrix is developed in order to evaluate geometrical parameters in order to control and forecast the phenomena. The results are presented, evaluated and compared to the rigid riser standard solution.

    brazil-uerj Repository record for Estudo da curvatura residual aplicada ao problema da compressão dinâmica em risers rígidos em catenária livre (opens in a new tab)

  19. Numerical Modeling Techniques of High-Speed Rail Bridge Structures

    … static and dynamic analyses were performed with load cases without train loading and with train loading on the prototype HSR bridge. Additionally, a brief analytical study was performed to demonstrate the HSR bridge seismic performance using three different ground motions. The ground motions were …

    unr Repository record for Numerical Modeling Techniques of High-Speed Rail Bridge Structures (opens in a new tab)

  20. Modeling of bulk and porous shape memory alloys

    … created and then analyzed under uniaxial tensile loads using Ansys APDL with its superelastic material model. Four major mechanical characteristics, namely, apparent reversible strain, apparent elastic modulus, volume fraction of transformed material, and strain energy absorption/dissipation were …

    ets-quebec Download PDF for Modeling of bulk and porous shape memory alloys (opens in a new tab)

Page 1 of 16