Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 178 for “"load cells"”.

  1. Continuous Cardiorespiratory Monitoring Using Ballistocardiography From Load Cells Embedded in a Hospital Bed

    … derived from the low-frequency components of the load cell signals. Lastly, this work presents two models for blood pressure (BP) estimation -- 1) Conventional pulse transit time (PTT)-based model and 2) DL-based model, both using multi-channel BCG and the photoplethysmogram (PPG) signals to …

    gatech Repository record for Continuous Cardiorespiratory Monitoring Using Ballistocardiography From Load Cells Embedded in a Hospital Bed (opens in a new tab)

  2. The detection of mould-strand interaction employing load cells in the continuous casting of billets

    Instrumentation of the mould with load cells and linear variable displacement transducers was completed to evaluate mould-strand interaction in a continuous casting machine for steel billets. A plant trial was conducted in which several lubricants were tested at four rates. Three carbon grades were …

    ubc Repository record for The detection of mould-strand interaction employing load cells in the continuous casting of billets (opens in a new tab) Download PDF for The detection of mould-strand interaction employing load cells in the continuous casting of billets (opens in a new tab)

  3. Determining Cause Of Failure For Load Cells Supporting Vertical Pressure Vessels Subject To Wind Loading

    Wind loads cannot be avoided during a natural disaster such as a hurricane and could affect the strength and stability of vertical pressure vessels during exposure. Vertical pressure vessels cater to large wind loads; therefore, it is imperative to study the effect of additional loading on the …

    gsu Repository record for Determining Cause Of Failure For Load Cells Supporting Vertical Pressure Vessels Subject To Wind Loading (opens in a new tab)

  4. Stability Analysis Of Vertical Industrial Pressure Vessel Resting On Load Cells Subjected To A Seismic Load.

    … vessels, is always an issue under the seismic load. In this current work, the acceleration that causes instability for a vertical pressure vessel has been determined experimentally using scaled models. This instability is caused by the tipping of the tall structure that is not completely fixed …

    gsu Repository record for Stability Analysis Of Vertical Industrial Pressure Vessel Resting On Load Cells Subjected To A Seismic Load. (opens in a new tab)

  5. In situ calibration for load cells in bipedal 3D printed robot utilizing Computer-Aided Design model

    Load cells are very important components in a robot system. They help the robot to get feedback from the environment around it and generate control signals accordingly. However, like every other sensor, load cells need to be calibrated over time to maintain their accuracy and precision. In the …

    vt Repository record for In situ calibration for load cells in bipedal 3D printed robot utilizing Computer-Aided Design model (opens in a new tab)

  6. Embedding a Grid of Load Cells into a Dining Table for Automatic Monitoring and Detection of Eating Events

    … of a table that uses an embedded grid of load cells to sense the weights and positions of objects. The main challenge is aligning the tops of adjacent load cells to within a few micrometer tolerance, which we accomplish using a novel inversion process during construction. Experimental …

    clemson Repository record for Embedding a Grid of Load Cells into a Dining Table for Automatic Monitoring and Detection of Eating Events (opens in a new tab)

  7. Design and characterization of a smart bit for in-situ force measurement, using capacitive load cells and acoustic spectra analysis to determine rock type and tool wear in rock excavation process

    … sensor designs were tested: a capacitive load cell with non-linear dynamics used to classify material type and tool wear conditions, an acoustic sensor used to classify tool wear, and a capacitive load cell with linear dynamics used to measure the cutting forces. Full scale rock cutting …

    colo-mines Repository record for Design and characterization of a smart bit for in-situ force measurement, using capacitive load cells and acoustic spectra analysis to determine rock type and tool wear in rock excavation process (opens in a new tab)

  8. Direct measurement of wind loads on a low-rise test building

    Wind loads on low-rise structures are studied in the field primarily so that the results obtained can be used to provide a base-line data set and to assist in wind tunnel studies. The objective of this work is to develop a means of directly measuring total wind loads in the field on a low-rise test …

    ttu Repository record for Direct measurement of wind loads on a low-rise test building (opens in a new tab)

  9. Uma análise do comportamento das células de carga e dos piezômetros pneumáticos fabricados pela COPPE para utilização no metrô do Rio de Janeiro

    … COPPE to be utilized in the field, are examined: Load Cells and Hidraulic Piezometers. The Load Cells were utilized in the strutted diaphragm wall to measure the loads that were carried by the struts, while the Pneumatic Piezometers were utilized measurement of the pore-water pressure behind the …

    brazil-uerj Repository record for Uma análise do comportamento das células de carga e dos piezômetros pneumáticos fabricados pela COPPE para utilização no metrô do Rio de Janeiro (opens in a new tab)

  10. Design of a force sensing system to assist robotic space servicing and exploration operations

    … that employs an array of commercially available load cells to reconstruct contact forces by determining a centroid of force. The proposed RSS system can be divided into two coherent systems: a mechanical system and an electrical system. The mechanical system is composed of two load cells, two …

    wvu Repository record for Design of a force sensing system to assist robotic space servicing and exploration operations (opens in a new tab)

  11. High speed weighing system analysis via mathematical modelling : a thesis presented in partial fulfilment of the requirements for a degree of Masters of Engineering, Mechatronics at Massey University, Albany, Auckland, New Zealand

    … including; robotics, automotive and food. Load cells are considered to be the definitive force sensor for industrial weighing systems. Load cell output is in the form of an oscillatory response in which the measurand contributes to the response characteristics. Current methods require the …

    massey Repository record for High speed weighing system analysis via mathematical modelling : a thesis presented in partial fulfilment of the requirements for a degree of Masters of Engineering, Mechatronics at Massey University, Albany, Auckland, New Zealand (opens in a new tab)

  12. Development of a corn stover yield monitor

    … beater. The plate was instrumented with load cells to measure the impact force of the corn stover on the impact plate. Instrumentation methods for the impact plate were evaluated to determine the most effective method to instrument the impact plate to measure the impact force of the …

    iastate Repository record for Development of a corn stover yield monitor (opens in a new tab)

  13. Correlation of roof loads to wind speed and direction on a post-frame building in real time

    … system was built at the University of Manitoba. Load cells installed at the top and bottom of ten eave wall posts were intended to measure the tributary load transferred from the roof structure into the supporting posts. In 2011 wind speed and direction were measured adjacent to the structure and …

    manitoba Repository record for Correlation of roof loads to wind speed and direction on a post-frame building in real time (opens in a new tab)

  14. Forces on laboratory model dredge cutterhead

    … using five 13.3 kN (3000 lb) one directional load cells placed on the dredge ladder in various places so the transmitted cutting forces could be obtained. The objectives for this study are to determine the vertical, horizontal, and axial forces that are produced by the cutterhead while …

    tamu Repository record for Forces on laboratory model dredge cutterhead (opens in a new tab)

  15. Genetic algorithm optimisation of load cell geometry by finite element analysis

    … was to numerically model the influence of end-loading conditions on column strain gauge load cells and to develop the model into a program for optimising the geometry of column load cells. It is shown that, for most practical loading conditions, load celis with large numbers of equispaced …

    city-london Download PDF for Genetic algorithm optimisation of load cell geometry by finite element analysis (opens in a new tab)

  16. Development of a reduced compliance load cell

    … measurement include strain gage or piezoelectric load cells These are all based on measuring a finite deformation of the load cell. The goal of this thesis is to lay the groundwork for developing a load cell which includes an active feedback loop to compensate for the deformation of the load cell …

    ut-knoxville Repository record for Development of a reduced compliance load cell (opens in a new tab)

  17. Projeto, construção e avaliação de um dinamômetro para a medição das componentes da força de usinagem no torneamento

    … of the machining force in turning using uniaxial load cells based on strain gauge transducers, which are usually cheaper than piezoelectric load cells. The proposed instrument was statically calibrated in a universal testing machine from 0 to 1,5 kN and presented metrological characteristics, such …

    brazil-ufrn Repository record for Projeto, construção e avaliação de um dinamômetro para a medição das componentes da força de usinagem no torneamento (opens in a new tab)

  18. At-rest and compaction-induced lateral earth pressures of moist soils

    … ring, and horizontal stresses are measured using load cells which support one half of the ring. Rapid cyclic loading was applied to compacted soil specimens, using a digital pressure regulator and a computer-based data acquisition system. The performance of the device was validated by performing …

    vt Repository record for At-rest and compaction-induced lateral earth pressures of moist soils (opens in a new tab)

  19. Preliminary Design of an Improved Load Measuring Device for Underground Mining Standing Supports

    … underground retreat mining. Knowledge of the load-displacement behavior of a standing support and loading induced by the mine opening is critical proper support selection. The NIOSH STOP database contains load-displacement laboratory test data for most commonly used standing supports. …

    vt Repository record for Preliminary Design of an Improved Load Measuring Device for Underground Mining Standing Supports (opens in a new tab)

  20. A model for time varying wind loads on a low-rise structure

    Overall loads acting on a full scale building in the natural vdnd environment are characterized in this work. The first objective of this research is to directly measure the overall wind loads on the test building at the Wind Engineering Research Field Laboratory (WERFL) in the natural wind …

    ttu Repository record for A model for time varying wind loads on a low-rise structure (opens in a new tab)

Page 1 of 9