Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 420 for “"load displacement"”.

  1. Elastic analysis of axial load-displacement behavior of single driven piles

    … foundations are commonly recommended when large displacements are expected. Typically, though, their design involves only checking and providing for sufficient capacity to carry the applied loads. Load-displacement behavior of piles is considered secondary to the axial capacity; displacements are …

    texas Repository record for Elastic analysis of axial load-displacement behavior of single driven piles (opens in a new tab)

  2. The axial load-displacement behavior of steel strands used in rock reinforcement

    … aim of this thesis was to test and evaluate the load-displacement behavior of different types of grouted steel strands and rebar applicable to rock reinforcement. The main interest was focused on the effect of the epoxy and zinc coatings on the axial load-displacement behavior of the strand. The …

    aalto Repository record for The axial load-displacement behavior of steel strands used in rock reinforcement (opens in a new tab)

  3. Load-displacement behavior of frame structures composed of fiber reinforced polymeric composite materials

    … investigation aimed at examining the static load-displacement response of braced plane frame structures composed of fiber reinforced polymeric (FRP) composite material structural members manufactured by the pultrusion process. In the experimental part of this investigation, eighteen …

    gatech Repository record for Load-displacement behavior of frame structures composed of fiber reinforced polymeric composite materials (opens in a new tab)

  4. Evaluation of Scale Effects in Load-Displacement Response of Drilled Shafts Based on Field Load Tests

    Load testing such as standard top-down or bi-directional tests are widely accepted practices that provide foundation designers with site-specific information about the nominal resistance of drilled shaft foundations. The application of load testing in drilled shaft foundations provides insight into …

    unr Repository record for Evaluation of Scale Effects in Load-Displacement Response of Drilled Shafts Based on Field Load Tests (opens in a new tab)

  5. Experimental investigation of steel-to-timber joints with inclined self-tapping screws: A parametric study evaluating load-displacement behavior and testing configurations in quasi-static testing

    Detta examensarbete undersöker användningen av lutande självgängande träskruvar i stål/trä-förband och behandlar deras design samt last-deformationsbeteende genom en experimentell undersökning och en litteraturstudie.Litteraturstudien ger en förståelse för dimensioneringen och beteendet hos …

    chalmers Repository record for Experimental investigation of steel-to-timber joints with inclined self-tapping screws: A parametric study evaluating load-displacement behavior and testing configurations in quasi-static testing (opens in a new tab)

  6. Preliminary Design of an Improved Load Measuring Device for Underground Mining Standing Supports

    … underground retreat mining. Knowledge of the load-displacement behavior of a standing support and loading induced by the mine opening is critical proper support selection. The NIOSH STOP database contains load-displacement laboratory test data for most commonly used standing supports. …

    vt Repository record for Preliminary Design of an Improved Load Measuring Device for Underground Mining Standing Supports (opens in a new tab)

  7. Experimental And Numerical Investigations On Bond Durability Of Cfrp Strengthened Concrete Members Subjected To Environmental Exposure

    … under repeated mechanical and environmental loading. This thesis investigates bond durability under accelerated environmental conditioning of two FRP systems commonly employed in civil infrastructure strengthening: epoxy and polyurethane systems. Five environments were considered under three …

    ucf Repository record for Experimental And Numerical Investigations On Bond Durability Of Cfrp Strengthened Concrete Members Subjected To Environmental Exposure (opens in a new tab)

  8. Analysis of Single Fiber Pushout Test of Fiber Reinforced Composite with a Nonhomogeneous Interphase

    … design of experiments, the effects of geometry, loading and material parameters on critical parameters of the pushout test such as the load-displacement curve and maximum interfacial shear and normal stresses are studied. The sensitivity analysis shows that initial load displacement curve is …

    usf Repository record for Analysis of Single Fiber Pushout Test of Fiber Reinforced Composite with a Nonhomogeneous Interphase (opens in a new tab)

  9. The Development And Assessment Of A Post Grouting Method To Increase The Load Carrying Capacity Of Deep Foundations

    … shaft base resistance at low values of displacement, much uncertainty exists among engineering professionals as to the conditions under which this option may be entertained. The impact of diverse factors such as soil gradation and soil relative density, overburden pressures, and grouting …

    unr Repository record for The Development And Assessment Of A Post Grouting Method To Increase The Load Carrying Capacity Of Deep Foundations (opens in a new tab)

  10. The capacity of driven steel H-piles in lacustrine clay, till and karst bedrock: a Winnipeg case study

    … limiting the knowledge of their ultimate load-carrying capacity (Qult) and load-displacement behavior. As a result of limited knowledge, the conventional limit states design (LSD) criteria is unreliable, as it bases pile capacity on the structural strength of steel as opposed to the …

    manitoba Repository record for The capacity of driven steel H-piles in lacustrine clay, till and karst bedrock: a Winnipeg case study (opens in a new tab)

  11. Numerical modeling of soil-geosynthetic interaction

    … on different sizes of pullout box to match load-displacement results with that found during laboratory experiments. Friction coefficient was selected by trial and error method to match the load-displacement curves calculated from the laboratory experiments to that found from the finite …

    wvu Repository record for Numerical modeling of soil-geosynthetic interaction (opens in a new tab)

  12. Asymptotic post-buckling analysis by Koiter's method with a general purpose finite element code

    … leading to a great decrease in buckling load. Koiter showed that the effect of initial imperfections is largely determined by the initial post-buckling behavior of the perfect structure. The present work seeks to implement Koiter’s method of asymptotic post-buckling analysis on a finite …

    vt Repository record for Asymptotic post-buckling analysis by Koiter's method with a general purpose finite element code (opens in a new tab)

  13. Experimental and Finite Element Analysis of Vacuum Infused FRP Composite π-Joints

    … a combination of ASTM standardized tensile loading and three-point flexural experiments, in addition to ANSYS simulation, this thesis provides valuable insights into the manufacturing processes and design optimization of composite π-joints for aerospace applications. Coupon testing …

    wvu Repository record for Experimental and Finite Element Analysis of Vacuum Infused FRP Composite π-Joints (opens in a new tab)

  14. Study of Drift Limits for High-Strength Concrete Columns

    … to calculate the critical coordinates for the load-displacement response is presented.

    uiuc Repository record for Study of Drift Limits for High-Strength Concrete Columns (opens in a new tab)

  15. Constitutive modeling and experimental investigations of phase transitions in silicon under contact loading

    … If subjected to pressure or contact loading, Si undergoes a series of stress-driven phase transitions accompanied by large volume changes. We developed a finite deformation constitutive model that captures the semiconductor-to-metal (cd-Si ➙ β-Si) and metal-to-amorphous (β-Si ➙ a-Si) …

    qucosa-diss

  16. A study of bond between fibre reinforced polymer and concrete under quasi static and impact loading

    … preparation on reinforced concrete beams under loading. It also describes an innovative specimen that enables examination of bond properties using a notched beam under a four-point bending test. The thesis also studies the bond between FRP and concrete under impact loading and discusses the …

    ubc Repository record for A study of bond between fibre reinforced polymer and concrete under quasi static and impact loading (opens in a new tab) Download PDF for A study of bond between fibre reinforced polymer and concrete under quasi static and impact loading (opens in a new tab)

  17. Unreinforced masonry walls subjected to out-of-plane seismic actions.

    … a move away from FB methods and toward displacement-based (DB) methods, where the aim is to ensure that structural deformations are kept within acceptable displacement limits. URM walls subjected to out-of-plane actions make a prime candidate for the development of such methodology. This …

    adelaide Repository record for Unreinforced masonry walls subjected to out-of-plane seismic actions. (opens in a new tab)

  18. Analytical and laboratory investigations into the failure mechanisms of grouted cable bolts subjected to axial loading

    … understand the response to and behaviour under load. This study aimed to improve the understanding of the mechanism of load transfer of cable bolts by investigating the performance of a range of cable bolts with different design under axial loading from experimental and analytical viewpoints. An …

    unsw Repository record for Analytical and laboratory investigations into the failure mechanisms of grouted cable bolts subjected to axial loading (opens in a new tab)

  19. Crack path selection in microstructurally tailored inhomogeneous polymers

    … boundary properties. Each microstructure was loaded in a single edge notch tension (SENT) configuration, and the resulting strain fields were recorded using digital image correlation (DIC). Depending on the applied load and the local microstructure, different crack paths occur, such as the …

    uiuc Repository record for Crack path selection in microstructurally tailored inhomogeneous polymers (opens in a new tab)

Page 1 of 21