Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 81 for “"load estimation"”.

  1. Load Estimation For Electric Power Distribution Networks

    … to be accurately represented using updated nodal load information as a requirement for efficient control and operation of the distribution network. In Distribution Load Estimation (DLE), two major categories of data are utilized: historical data and direct real-time measured data. In this thesis, …

    ucf Repository record for Load Estimation For Electric Power Distribution Networks (opens in a new tab)

  2. Peak load estimation using load research data

    Peak load estimation is a critical element in utility decision making. An electric utility must construct, maintain, and operate equipment sufficient to meet the peak, or maximum demand level. Electric utilities have utilized several methods of analyzing energy consumption which have yielded …

    vt Repository record for Peak load estimation using load research data (opens in a new tab)

  3. Stepper Motor Load Estimation Using a Neural Network

    … printers. The ability to estimate stepper motor load provides an opportunity for health monitoring. For example, excessive load estimates may indicate a future problem in the driven system such as bearing wear. Stepper motor drivers often have built-in stall detection strategies that exploit the …

    mtu Repository record for Stepper Motor Load Estimation Using a Neural Network (opens in a new tab)

  4. Femur/femoral neck load estimation during stair navigation

    … and aging. A better understanding of the hip loading environment is helpful for the hip fracture prevention, rehabilitation, and the design of osteogenic exercises. This study was to compare the femoral neck stresses between young and older adults during stair ascent and descent, and to …

    iastate Repository record for Femur/femoral neck load estimation during stair navigation (opens in a new tab)

  5. Dynamic Power System Load -Estimation of Parameters from Operational Data

    The significance of load modeling for voltage stability studies has been emphasized by several disturbances, which have taken place in the past years. They have shown that the loads in combination with other dynamics are among the main contributors of prolonged low voltage conditions, voltage …

    lund Repository record for Dynamic Power System Load -Estimation of Parameters from Operational Data (opens in a new tab) Download PDF for Dynamic Power System Load -Estimation of Parameters from Operational Data (opens in a new tab)

  6. Forecasting and Identification Methods Applied to Gas Load Estimation Problems

    … of methods to solve certain problems in gas load estimation. One of the problems is to transform historical daily data in one Gas Day format to any other format, depending upon which format is standardized by the gas industries. Gas pipeline companies need to control flow and maintain …

    marquette Repository record for Forecasting and Identification Methods Applied to Gas Load Estimation Problems (opens in a new tab)

  7. Load Estimation, Structural Identification and Human Comfort Assessment of Flexible Structures

    … coupled with human interactions in the form of loading. The investigations in past literature on this topic clearly state that the design of flexible structures can be improved with better load modeling strategies acquired with reliable load quantification, a deeper understanding of structural …

    ucf Repository record for Load Estimation, Structural Identification and Human Comfort Assessment of Flexible Structures (opens in a new tab)

  8. Non-Negative Least Square Optimization Model for Industrial Peak Load Estimation

    Load research is the study of load characteristics on a power distribution system which helps planning engineer make decisions about equipment ratings and future expansion decisions. As it is expensive to collect and maintain data across the entire system, data is collected only for a sample of …

    vt Repository record for Non-Negative Least Square Optimization Model for Industrial Peak Load Estimation (opens in a new tab)

  9. Development of error correction techniques for nitrate-N load estimation models

    Excess nutrient loads carried by streams and rivers are a great concern for environmental resource managers. In agricultural regions, excess loads are transported downstream to receiving water bodies, potentially causing algal blooms, which could lead to numerous ecological problems. To better …

    uiuc Repository record for Development of error correction techniques for nitrate-N load estimation models (opens in a new tab)

  10. A Tale of Ten Cities: Consolidating Weather Information in Gas Load Estimation

    Existing natural gas load estimation models are based on gas operating areas that are small enough so that the necessary weather information comes from one to three weather sites. Larger operating areas need to use weather information from many weather sites to adequately model the gas consumption …

    marquette Repository record for A Tale of Ten Cities: Consolidating Weather Information in Gas Load Estimation (opens in a new tab)

  11. ADVANCING RUNOFF AND NUTRIENT LOAD ESTIMATION IN MODERN AGRICULTURAL LANDSCAPES FOR IMPROVED WATERSHED MANAGEMENT

    … land management practices for contaminant load reduction, and its application to regions with scarce data, significant uncertainty in watershed and land management conditions, and new land use practices. This dissertation aimed to deepen our understanding of these uncertainties and identify …

    cornell Repository record for ADVANCING RUNOFF AND NUTRIENT LOAD ESTIMATION IN MODERN AGRICULTURAL LANDSCAPES FOR IMPROVED WATERSHED MANAGEMENT (opens in a new tab) Embargoed until 2027-01-09

  12. Comparative analysis of nitrate load estimation techniques in watersheds with different land-use characteristics

    … States (US) and all over the world. Nutrient loads in surface water can be estimated by monitoring their concentrations in the water bodies. The challenge is to determine the optimal data sampling frequency and the best method for the estimation of nutrient concentrations that minimizes the …

    uiuc Repository record for Comparative analysis of nitrate load estimation techniques in watersheds with different land-use characteristics (opens in a new tab)

  13. Implications of Hydrologic Data Assimilation in Improving Suspended Sediment Load Estimation in Lake Tahoe, California

    … has been listed as impaired, Total Maximum Daily Loads (TMDLs) for the water quality constituents causing the impairment must be developed. A TMDL is the maximum daily mass flux of a pollutant that a waterbody can receive and still safely meet water quality standards. The development of a TMDL and …

    portland-state Repository record for Implications of Hydrologic Data Assimilation in Improving Suspended Sediment Load Estimation in Lake Tahoe, California (opens in a new tab)

  14. The Evaluation of Statistical Models in Water Quality Constituents Load Estimation in Southern Ontario, Canada

    … representation of the water quality constituents load transported by rivers and streams is crucial to understand the quality of the lakes, the behavior of the rivers, to assess the efficacy of water quality monitoring projects, and for the development of watershed models. Numerous statistical …

    guelph Repository record for The Evaluation of Statistical Models in Water Quality Constituents Load Estimation in Southern Ontario, Canada (opens in a new tab)

  15. Deployment Load Estimation of Composite Tape Spring Spacecraft Booms Using Reverse Engineering and Data-Driven Rational Approximation

    … As a first step towards deployment-induced shock load estimation, this study characterizes the dynamics of a parabolic composite tape spring boom using an experimental modal analysis and finite element (FE) modeling workflow. This initial work details the testing setup, evaluation procedures, …

    vt Repository record for Deployment Load Estimation of Composite Tape Spring Spacecraft Booms Using Reverse Engineering and Data-Driven Rational Approximation (opens in a new tab)

  16. Real-time aerodynamic load estimation and aircraft prognostic control using distributed flush air data system (FADS) sensor network

    … forces and moments, the appropriate real-time estimation for these parameters is of utmost interest.</p> <p>The work presented herein addresses the issues associated with the real-time aerodynamic load estimation problem through the use of a distributed Flush Air Data System (FADS) sensor …

    iastate Repository record for Real-time aerodynamic load estimation and aircraft prognostic control using distributed flush air data system (FADS) sensor network (opens in a new tab)

  17. Rank-Data Distribution Method (R-D Method) for Daily Time-Series Bayesian Networks and Total Maximum Daily Load Estimation

    … the higher frequency fluctuations of nutrient loads and concentrations. Some mechanistic mathematical models can provide daily time series outputs of nutrient concentrations but it is difficult to incorporate non-numerical data, such as management scenarios, to mechanistic mathematical models. …

    utahstate Repository record for Rank-Data Distribution Method (R-D Method) for Daily Time-Series Bayesian Networks and Total Maximum Daily Load Estimation (opens in a new tab)

  18. Enhancing Accuracy and Reliability of Spinal Load Estimation in Lifting/Lowering Tasks: Insights from Inverse Dynamics-Based Multibody Modelling in OpenSim

    … to improve reliability in estimating spinal loads during static lifting tasks. The muscle activities predicted by the SCSO framework demonstrated closer agreement with electromyography data compared to those obtained by the default optimization solver in OpenSim, making it more suitable for …

    ottawa-retro Repository record for Enhancing Accuracy and Reliability of Spinal Load Estimation in Lifting/Lowering Tasks: Insights from Inverse Dynamics-Based Multibody Modelling in OpenSim (opens in a new tab)

Page 1 of 5