Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 154 for “"load range"”.
-
High Efficiency Optimization of LLC Resonant Converter for Wide Load Range
… to 83% for desktop derived servers, depending on loading condition and server type. Furthermore, recently some industry companies came out with a much higher efficiency target for the whole AC/DC front-end converter over a wide load range. Distributed power systems are widely adopted in the …
-
An Adaptive Wide Current-load Range Capacitor-less LDO With Ultra-low Power
… Extension (AHE) circuit increases the current load range of the LDO from very low to very high loads. This supports duty-cycling components in these constrained SOCs to increase battery life which requires a low nominal current and a high current when action is needed. To counteract the …
-
Active Source Management to Maintain High Efficiency in Resonant Conversion over Wide Load Range
… alternative when the quality factor of the load is significantly high. The input current of a CF resonant inverter is considerably smaller than the output current, which benefits efficiency. A simple, parallel resonant tank is sufficient to create a high-power sinusoidal signal at the …
-
A Two-mode Buck Converter toward High Efficiency for the Entire Load Range for Low Power Applications
… of power converters, especially at light load. This thesis research investigated a power converter to supply power for the microprocessor of a smart camera. The input voltage of the converter is 5 V, and the output voltage is 1.2 V with the load ranging from 10 mA (12 mW) to 1200 mA (1440 …
-
Studies on the Load Range of an HCCI Engine using In-Cylinder Pressure, Ion Current and Optical Diagnostics
… ignition (SI) engine. The efficiency is in the range of the Diesel engine and the emissions are low and comparable to the emissions from an SI engine with catalyst. No flame propagation is present in the HCCI engine; instead the whole charge is gradually consumed at several locations …
-
Analysis, Design & Control of Low-Q LLC DC-DC Resonant Converter for Wide Input Voltage and Load Range Applications
… and lose zero voltage switching (ZVS) at reduced load and high-end of the input voltage range. Traditional variable frequency LLC resonant converter requires wide switching frequency range and a high quality-factor (Q) of resonant circuit for voltage regulation at light loads. A high Q results in …
-
Characterization of Glow Plug and HCCI Combustion Processes in a Small Volume at High Engine Speed - Load Range, Emission Characteristics and Optical Diagnostics
The objective of this research that has taken me halfway to my PhD degree was to understand how HCCI combustion behaves in a small volume at high rotational speed. The investigation has been carried out using a modified model airplane engine. The whole study can be divided into two main parts; in …
-
A Comparative Evaluation of Rear Tire Configuration on a Front Wheel Drive Assist Tractor
… in three tractive conditions and at two drawbar load ranges. Tests results indicated that, single rear tires were capable of pulling a heavier load with higher fuel efficiency at every combination of tractive condition and drawbar load except in the loose tractive condition at the high drawbar …
-
High-frequency off-line power conversion using quasi-resonant and multi-resonant techniques
… with emphasis on the conversion-frequency range, efficiency, load range, input-voltage range, output power, dynamic response, and power density. A comprehensive dc analysis of the half-wave and full-wave, half-bridge zero-current-switched quasi-resonant converters (QRCs) is presented. …
-
Optical Diagnostics of Gasoline Compression Ignition : HCCI-PPC-Diffusion Combustion
… efficiency. These concepts are limited to low load operation. To extend the load range, gasoline has proved attractive due to its high resistance to autoignition. In contrast to diesel, this feature allows LTC to be used at increased loads. Despite the benefits, LTC concepts are challenged by …
-
Class-E Current Source Power Conversion
… constant current within a wide output voltage range, similar to LED drivers. The load-independent (LI) Class-E inverter is a promising topology for such applications since it can realize zero-voltage switching (ZVS) within a wide load range. Class-E current source can be achieved by converting …
-
Performance of a lean-burn natural gas engine using a double-pulse partially-stratified charge ignition system
To extend the load range over which a natural gas lean-burn spark-ignited engine can operate, a method that uses a partially-stratified charge (PSC) has been proven to be useful. The PSC is produced by injecting a small amount of fuel (less than 5% of the total fuel mass) directly into the engine …
-
Impact of Fuel Properties on Partially Premixed Combustion
… fuel composition on combustion, emissions and load range for PPC. A clear interaction between RON and ignition delay was found; higher research octane number results in longer ignition delay. Also, an interaction between ignition delay and fraction of low temperature reaction was found, a …
-
Investigation of High Performance AC/DC Front-End Converter with Digital Control for Server Applications
… high efficiency requirements for a wide load range for power management in telecom and computing equipment. High efficiency over a wide load range is now a requirement. On the other hand, power density is still a big challenge for front-end AC/DC converters. For DPS systems, front-end …
-
Load-Independent Class-E Power Conversion
… induction heating, and plasma pulsing. The load current in these applications usually varies over a range. Efficiency of a conventional Class-E design degrades dramatically due to the hard switching beyond the optimum conditions. Keeping ZVS with load change in a Class-E topology is …
-
Investigation of High Reactivity Fuel Property Effects on Reactivity Controlled Compression Ignition Combustion
… emissions, fuel efficiency, and the operable load range.;A General Motors 4-cylinder, 1.9 liter, light-duty CI engine was converted to run on diesel fuel (high reactivity fuel) and compressed natural gas (CNG) (low reactivity fuel). The engine was operated at 2100 revolutions per minute (RPM), …
-
Fuel Economy and Greenhouse Gas Reduction Potentials of Advanced Combustion Modes in Light-Duty Vehicles: A Well-to-Wheel Analysis using Vehicle Systems Simulations with Experimental Engine Data
… to operate over a sufficient engine speed and load range to make it practical for implementation in production vehicles. In-cylinder blending of gasoline and diesel to achieve reactivity controlled compression ignition (RCCI) has been shown to reduce NOX and PM emissions while maintaining or …
-
Rotordynamic coefficients for a load-between-pad, flexible-pivot tilting pad bearing at high loads
… tilting pad bearing is presented at a load between pad configuration for various load and speed combinations. A similar work performed on the same bearing at lower loads ranging from 0-1 MPa (0-150 psi) by Al-Ghasem was tested, whereas the current work investigates effects in the load …
Page 1 of 8