Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"load-pull"”.

  1. Nonlinear device characterization using harmonic load pull measurement

    … paper. We use a large signal harmonic source/load pull system to present a variety of terminations to the nonlinear device. Measurements of some parameters (such as current, voltage or power variables) of the nonlinear device are performed. We make use of the measured data to come up with a …

    iastate Repository record for Nonlinear device characterization using harmonic load pull measurement (opens in a new tab)

  2. Pulsed Power and Load-Pull Measurements for Microwave Transistors

    … pulse widths between these extremes. A pulsed RF load-pull test bench was also assembled and demonstrated for a VDMOS (Vertically Diffused Metal Oxide Semiconductor) and an LDMOS power transistor. The basic technique should also be useful for GaAs and GaN transistors with suitable consideration …

    usf Repository record for Pulsed Power and Load-Pull Measurements for Microwave Transistors (opens in a new tab)

  3. Load-pull measurement and simulation on indium phosphide heterojunction biopolar transistors

    … transistor was characterized using an automated load-pull measurement system to determine the optimum load conditions for future applications at 10 GHz. These measurements yielded power-added efficiencies ranging from 54-63% for Class A to Class C/E bias conditions. Simulations using a SPICE …

    hawaii Repository record for Load-pull measurement and simulation on indium phosphide heterojunction biopolar transistors (opens in a new tab)

  4. Cryogenic on-wafer microwave load-pull power measurements and device performance analysis

    Opened at request of author 6/29/2026, see ticket https://libanswers.library.gatech.edu/admin/ticket?qid=18577201

    gatech Repository record for Cryogenic on-wafer microwave load-pull power measurements and device performance analysis (opens in a new tab)

  5. Design and Realization of Doherty Power Amplifier Based on Active Load- Pull Measurements

    … use measurement data from an experimental active load-pull setup. In this work, an active load-pull system was developed, tested and used in the characterization of a 10W GaN HEMT. The characterization data were used in combination with a new DPA design approach, intended to provide an improved …

    chalmers Repository record for Design and Realization of Doherty Power Amplifier Based on Active Load- Pull Measurements (opens in a new tab)

  6. Mitigation of antenna mutual coupling for load pull reduction in MIMO and phased arrays

    … demand greater data capacity with faster download times and lower latency. LTE 4G for all its engineering improvements in areas such as modulation, error correction and diversity is not capable of meeting the future requirements of some of the emerging technologies such as vehicle to vehicle …

    bristol Repository record for Mitigation of antenna mutual coupling for load pull reduction in MIMO and phased arrays (opens in a new tab) Download PDF for Mitigation of antenna mutual coupling for load pull reduction in MIMO and phased arrays (opens in a new tab)

  7. Design and Realization of a 6 GHz Doherty Power Amplifier from Load-pull Measurement Data

    … (DPA) design method is developed based on load-pull measurement data. The developed approach is particularly suitable for realization of high frequency hybrid DPAs. This is enabled by including the bias and stability networks in the characterization test board as well in addition to the …

    chalmers Repository record for Design and Realization of a 6 GHz Doherty Power Amplifier from Load-pull Measurement Data (opens in a new tab)

  8. On Nonlinear Time-Invariant Behavioural Models of Power Transistors Used in the Computer-Aided Design of Power Amplifiers

    … power transistor behavioral models from load-pull measurements. These models provide a valuable design aid to power amplifier designers looking to simulate the nonlinear behaviour of their RF circuit designs based on nonlinear characterizations of the power transistors. Two types of power …

    waterloo Repository record for On Nonlinear Time-Invariant Behavioural Models of Power Transistors Used in the Computer-Aided Design of Power Amplifiers (opens in a new tab)

  9. Linearity Optimization of Power Transistors Utilizing Harmonic Terminations

    … transistors using a commercial on-wafer harmonic load pull system. Specific attention is paid to the output tuning of the second harmonic impedance presented to the device. The ability to quantify the level of accuracy in a load pull system is explored by using various calibration validation …

    usf Repository record for Linearity Optimization of Power Transistors Utilizing Harmonic Terminations (opens in a new tab)

  10. A high-efficiency power amplifier integrated with a planar transmitting antenna.

    … designed via experimental determination of the loads required at the output of a transistor in order to maximise its efficiency. For this purpose, an active multi-harmonic load-pull system capable of independently varying the fundamental-frequency, second-harmonic-frequency and …

    ottawa-retro Repository record for A high-efficiency power amplifier integrated with a planar transmitting antenna. (opens in a new tab)

  11. FPGA-controlled Outphasing Modulator Using A Power Combining Antenna

    … could be exploited in outphasing through load modulation, it has the potential to improve total system efficiency. This project aimed to design a high-efficiency outphasing system for communication applications, consisting of two power amplifiers (PAs) and a power combining antenna array. …

    chalmers Repository record for FPGA-controlled Outphasing Modulator Using A Power Combining Antenna (opens in a new tab)

  12. Contributions to the Design of RF Power Amplifiers

    … design and analysis techniques based on load-pull characterization of active devices and impedance modulation effects are developed. These techniques were then applied to the design of a two-way Doherty amplifier and a three-way Doherty amplifier which were manufactured and their …

    ottawa-retro Repository record for Contributions to the Design of RF Power Amplifiers (opens in a new tab)

  13. Dynamic range characterization of indium-phosphide double-heterojunction bipolar transistors for ultralinear sub-millimeter wave applications

    … along with a novel procedure for calibrating load-pull measurements using all on-chip calibration standards. The use of all on-chip calibration standards can reduce potential calibration errors caused by cable movement. Also detailed are the suspected physical origins of nonlinearity in Type-I …

    uiuc Repository record for Dynamic range characterization of indium-phosphide double-heterojunction bipolar transistors for ultralinear sub-millimeter wave applications (opens in a new tab)

  14. Improved Techniques for Nonlinear Electrothermal FET Modeling and Measurement Validation

    … of the steepest-ascent search algorithm for load-pull is presented. This algorithm provides for high-resolution determination of the maximum power and associated load impedance using a small number of measured or simulated reflection-coefficient states. To perform a more thorough nonlinear …

    usf Repository record for Improved Techniques for Nonlinear Electrothermal FET Modeling and Measurement Validation (opens in a new tab)

  15. Modelling and Design Methodology of High-Efficiency Harmonic Tuned Power Amplifiers for 5G Applications

    … methods for effective on wafer active load pull that minimizes the amount of time required on the measurement system, and how to directly achieve maximum efficiencies by a combination of fundamental, second, and third harmonic at load and source of the active device. The conventional …

    calgary Repository record for Modelling and Design Methodology of High-Efficiency Harmonic Tuned Power Amplifiers for 5G Applications (opens in a new tab)

  16. Small And Large Signal Modeling Of MM-Wave MHEMT Devices

    … in measuring the test devices using the Maury load-pull system. Small-signal and noise modeling were accomplished using techniques standardized from several technical papers and prior USF Ph.D. work relative to the model extraction. The IC-CAP modeling software also provided a straightforward …

    usf Repository record for Small And Large Signal Modeling Of MM-Wave MHEMT Devices (opens in a new tab)

  17. Adaptive load impedance optimization for power amplifiers in reconfigurable radar transmitters.

    … approach uses intelligent search techniques with load-pull measurements for power-added efficiency (PAE) and adjacent channel power ratio (ACPR) to dynamically maximize the PAE while meeting spectral requirements. Using load-tuning, an algorithm performs a steepest ascent search for the PAE …

    baylor Repository record for Adaptive load impedance optimization for power amplifiers in reconfigurable radar transmitters. (opens in a new tab)

  18. Nonlinear device characterization and second harmonic impedance tuning to achieve peak performance for a SiC power MESFET device at 2GHz

    … measurements for a power MESFET device using the load pull system. The device was characterized at the fundamental and second harmonic frequencies during large signal operation. The data thus collected was used in designing the input and output impedance matching networks that would optimize the …

    iastate Repository record for Nonlinear device characterization and second harmonic impedance tuning to achieve peak performance for a SiC power MESFET device at 2GHz (opens in a new tab)

  19. Design of a Power Amplifier and Envelope Amplifier for a Multi-band Multi-standard Envelope Tracking System

    … well as the efficiency and power contours from load pull was exploited to develop an adequate procedure for the design of a broadband and high efficiency radio frequency PA. An in-depth study has also been conducted for a hybrid envelope amplifier topology in order to optimize it for power …

    waterloo Repository record for Design of a Power Amplifier and Envelope Amplifier for a Multi-band Multi-standard Envelope Tracking System (opens in a new tab)

  20. Linear and Efficient Power Amplifier Design Based on a New Optimisation Method

    … DPA was also done using a novel concept of IMD3 load-pull simulations. Finally, an emulation measurement study of a classical DPA using Chalmers Weblab setup for one-tone and two-tone has been done, where the time-varying load modulation is recreated in a measurement setup.

    chalmers Repository record for Linear and Efficient Power Amplifier Design Based on a New Optimisation Method (opens in a new tab)

Page 1 of 3