Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 106 for “"low damage"”.

  1. Low damage processing and process characterization

    … applications. The study includes process damage assessment with these two sources and another continuous wave (13.56MHz) plasma source. A global average simulation of the pulsed discharges was also included.;The transient plasma density and electron temperature from the double probe …

    wm-mary Repository record for Low damage processing and process characterization (opens in a new tab)

  2. Wall-to-floor Interactions in Low-damage Concrete Buildings

    Following the 2010/2011 Canterbury earthquakes, around 60% of multi-storey reinforced concrete buildings were demolished. Both practitioners and researchers have increasingly realized that low-damage structural systems could be an alternative to improve the seismic behavior of concrete buildings …

    auckland-ms Repository record for Wall-to-floor Interactions in Low-damage Concrete Buildings (opens in a new tab)

  3. Development of the low damage self-centering Sliding Hinge Joint

    The Sliding Hinge Joint (SHJ) is a low damage beam-column connection that rotates inelastically with minimal damage through sliding in Asymmetric Friction Connections (AFCs). The AFC is a type of slotted bolted connection, which is installed in the bottom web and bottom flange bolt groups. Previous …

    auckland-ms Repository record for Development of the low damage self-centering Sliding Hinge Joint (opens in a new tab)

  4. Low-damage gravity rocking connection for multi-storey moment frame buildings

    … literature showed the lack of a truly effective damage avoidance solution for timber or hybrid timber moment resisting frames (MRFs). Full system damage avoidance selfcentring behaviour is difficult to achieve with existing systems due to damage to the floor slab caused by beam-elongation. A …

    auckland-ms Repository record for Low-damage gravity rocking connection for multi-storey moment frame buildings (opens in a new tab)

  5. Development of a low damage steel frame building incorporating friction based braced and moment frame connections

    … Brace Frames (CBFs), for providing low-damage structural solutions. This involves the design and detailing of a full scale, three storey steel framed test building with composite floor systems incorporating nine different seismic resisting systems, being the key part of the New …

    auckland-ms Repository record for Development of a low damage steel frame building incorporating friction based braced and moment frame connections (opens in a new tab)

  6. Development of A New Self-centring Low-damage Bracing System for Earthquake Resistant Structures Using Resilient Slip Friction Joints (RSFJs)

    … buildings such as structural and non-skeletal damage spreading throughout the structure (such as permanent deformation and storey-drift, strength and stiffness deterioration/loss and so on). Dealing with all of those repercussions on the scale of an urban area or a city with many buildings will …

    auckland-tech Repository record for Development of A New Self-centring Low-damage Bracing System for Earthquake Resistant Structures Using Resilient Slip Friction Joints (RSFJs) (opens in a new tab)

  7. Depositing highly crystalline thin film silicon for photovoltaic solar cells utilizing metal surface wave plasmas

    … the Metal Surface Wave Plasma (MSWP) to create low damage, high speed deposited silicon thin films for solar photovoltaics. Studies characterizing thin films have been performed in the past, but very few utilizing the MSWP. Due to the high electron densities and low electron temperatures …

    uiuc Repository record for Depositing highly crystalline thin film silicon for photovoltaic solar cells utilizing metal surface wave plasmas (opens in a new tab)

  8. Development of a simplified method of analysis and design of controlled rocking columns

    … life safety by preventing collapse and balancing damage and economic considerations. However, ductile design often results in significant damage and residual deformations due to limited self‑centering capability. Emerging low‑damage technologies seek to minimize structural damage, provide …

    ubc Repository record for Development of a simplified method of analysis and design of controlled rocking columns (opens in a new tab) Download PDF for Development of a simplified method of analysis and design of controlled rocking columns (opens in a new tab)

  9. Finite Element Modeling and Analysis of the Asymmetric Friction Connection (AFC) With and Without Belleville Springs (BeSs)

    … of the Sliding Hinge Joint (SHJ) system for low-damage moment-resisting steel frames. The study focuses on developing, validating, and applying advanced finite element models and analysis (FEM/FEA) to interpret and expand upon the experimental findings previously conducted by Dr Shahab …

    auckland-tech Repository record for Finite Element Modeling and Analysis of the Asymmetric Friction Connection (AFC) With and Without Belleville Springs (BeSs) (opens in a new tab) Embargoed until 2028-06-02

  10. Towards More Optimized and Resilient Seismic Design of Buildings With Steel Moment Resisting Frames

    … code provisions do not explicitly address damage caused by earthquakes, leading to the prevalence of large economic losses. Examples of this limited scope are the changes made to design provisions for steel moment resisting frames (MRFs) following the 1994 pre-Northridge earthquake, where …

    mcmaster Repository record for Towards More Optimized and Resilient Seismic Design of Buildings With Steel Moment Resisting Frames (opens in a new tab)

  11. Process Development for Aluminum Gallium Nitride-Based Enhancement- and Depletion -Mode HEMTs

    … areas of research include controllable and low-damage gate-recess etching, damage-removing annealing processes, and metal structures for Schottky gate contacts. Both E-HEMTs and D-HEMTs are made in order to study the effect of recess etching, post-etch annealing, and post gate annealing …

    uiuc Repository record for Process Development for Aluminum Gallium Nitride-Based Enhancement- and Depletion -Mode HEMTs (opens in a new tab)

  12. The Centralised Rocking Concentrically Braced Frame

    … and structural integrity. However, the extent of damage caused by these severe earthquakes can be considerable, requiring extensive structural repairs or demolitions and causing significant ongoing social and economic disruption. In order to minimise the disruption, a low damage design philosophy …

    auckland-ms Repository record for The Centralised Rocking Concentrically Braced Frame (opens in a new tab)

  13. Structural control over unreliable wireless networks

    … of earthquake energy through controlled damage to the structural system. However, large recovery costs and rebuilding timelines have highlighted the need for a new low-damage design philosophy, which aims to design earthquake-resistant buildings that not only preserve life but leave the …

    umn Repository record for Structural control over unreliable wireless networks (opens in a new tab)

  14. Silicon Jellybean-Type Quantum Computing Device

    … three main parts: a) The development of the low-damage, high-precision fabrication process for jellybean chip; b) The tests and measurements of the fabricated jellybean qubit device; c) The development of the off-chip antenna for coherent control of the jellybean chip. For the first part of …

    unsw Repository record for Silicon Jellybean-Type Quantum Computing Device (opens in a new tab)

  15. Semiconductor Quantum-Well Extended Cavity Lasers and Deep-Surface Gratings for Distributed Bragg Reflector Lasers

    … losses of the passive waveguide section. A low- damage and high-selectivity dry etching technique, magnetically-confined-plasma reactive ion etching (MCP RIE), was used particularly for the ridge waveguide etch. The second focus is on deep surface gratings, fabricated by the two-beam …

    glasgow Download PDF for Semiconductor Quantum-Well Extended Cavity Lasers and Deep-Surface Gratings for Distributed Bragg Reflector Lasers (opens in a new tab)

  16. Process Development and Characterization of AlGaN/GaN Heterostructure Field-Effect Transistors

    … processing techniques such as isolation etching, low-resistance drain/source ohmic contacts, and Schottky gate formation. These efforts along with related processing issues will be discussed. Devices were then fabricated on epitaxial layers grown on sapphire substrates and on n-type, p-type, and …

    uiuc Repository record for Process Development and Characterization of AlGaN/GaN Heterostructure Field-Effect Transistors (opens in a new tab)

  17. A Study of the Role of Low Energy Ions in Causing Damage to III-V Semiconductors in Practical Ion Etching Systems

    … devices, the energetic ions employed can inflict damage that impairs the performance of the semiconductor. The avoidance of such material damage is important to ensure the optimum performance of both electronic and optoelectronic devices. The particular aim of the thesis is to study the damage …

    glasgow Download PDF for A Study of the Role of Low Energy Ions in Causing Damage to III-V Semiconductors in Practical Ion Etching Systems (opens in a new tab)

Page 1 of 6