Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 962 for “"lubricant"”.

  1. Gas turbine lubricant evaluation

    … physical changes which can occur to gas turbine lubricants as a result of exposure to operational conditions. The continual evolution toward more efficient gas turbines is accompanied by increasing thermal and mechanical loading which the lubricant must be able to withstand. In this thesis two …

    birmingham Download PDF for Gas turbine lubricant evaluation (opens in a new tab)

  2. WS2 nanoparticles as lubricant additives

    … properties and potential to replace problematic lubricant additives currently in use, WS2 nanoparticles (NPs) have spurred considerable interest from academia and industry over the last two decades to decipher their mechanism of action.<br/>To elucidate the mechanism, this study carried out …

    soton Download PDF for WS2 nanoparticles as lubricant additives (opens in a new tab)

  3. Miscibility of refrigerant-lubricant mixtures

    Numerous refrigerant and lubricant combinations have been in use for many years and their miscibilities are well known. But many of these common refrigerants are being phased out of production due to their propensity to harm the ozone in the atmosphere. New, environmentally safe refrigerants are …

    iastate Repository record for Miscibility of refrigerant-lubricant mixtures (opens in a new tab)

  4. Evolution of lubricant degradation and lubricant behaviour in a piston assembly of a reciprocating gasoline engine

    … engines to improve efficiency and life is the lubricant health within the piston ring pack. It is here where extreme temperatures, pressures and noxious gases interact with the small volume of lubricant designed to protect the components. There is a lack of knowledge of the correlation between …

    whiterose Download PDF for Evolution of lubricant degradation and lubricant behaviour in a piston assembly of a reciprocating gasoline engine (opens in a new tab)

  5. Polymer-supported components as lubricant additives

    Lubricants are a critical component in many industries as they provide a liquid interface between solidsurfaces. This interface lowers friction, resulting in smoother operation of moving parts and reducedwear from surface-surface contact.Formulating engine oils, however, requires considerable …

    strathclyde Repository record for Polymer-supported components as lubricant additives (opens in a new tab)

  6. Soil-lubricant-structure interface mechanics for microtunnelling

    … frame advances the machine and pipe string, lubricant (typically comprising Bentonite clay) is simultaneously injected into an overcut between the pipes and soil formed by the TBM . This process is periodically paused whilst pipes are added and for planned or unplanned stoppages. Currently, …

    oxford Repository record for Soil-lubricant-structure interface mechanics for microtunnelling (opens in a new tab)

  7. Biofunctional Lubricant-Infused Surfaces for Medical Implants

    … medical implants. The recent concept of lubricant-infused surfaces has shown promising results in preventing non-specific adhesion and attenuating clot formation on biomaterials. However, the existing surface models do not express biofunctional features, a crucial requirement when …

    mcmaster Repository record for Biofunctional Lubricant-Infused Surfaces for Medical Implants (opens in a new tab)

  8. Development of Graphene Related Solid Lubricant Coating

    Tribological coatings are important for improving performance and service life by reducing friction and wear in mechanical systems across several industries. Making composite coatings that balance tribological and electrical properties can improve mechanical strength, durability, and electrical …

    chalmers Repository record for Development of Graphene Related Solid Lubricant Coating (opens in a new tab)

  9. Carbon Dioxide-Lubricant Two-Phase Flow Patterns in Small Horizontal Wetted Wall Channels: The Effects of Refrigerant/lubricant Thermophysical Properties

    … liquid viscosity, and interfacial tension of lubricant-refrigerant mixtures. For the first time, interfacial tension measurements for refrigerant-lubricant mixtures over the range of concentrations from neat lubricant to pure refrigerant have been measured and published. The research has also …

    uiuc Repository record for Carbon Dioxide-Lubricant Two-Phase Flow Patterns in Small Horizontal Wetted Wall Channels: The Effects of Refrigerant/lubricant Thermophysical Properties (opens in a new tab)

  10. Lubricant quality and oxidative stability of Cruciferae oils

    … related oilseeds, was investigated for use as a lubricant base-oil. Oils obtained from B. rapa L. were selected because of their superior cold temperature performance over Sinapis alba L., B. carinata A., B. napus, and B. juncea L. The commercial antiwear additive zinc dialkyl dithiophosphate …

    sask Repository record for Lubricant quality and oxidative stability of Cruciferae oils (opens in a new tab)

  11. Thin film bearings with phase change of lubricant

    The possible evaporation of lubricant in fluid film bearings has been investigated theoretically and by experiment using a radial flow hydrostatic bearing supplied with liquid refrigerant R114. Good correlation between measured and theoretical values was obtained using a bespoke computational fluid …

    aston Download PDF for Thin film bearings with phase change of lubricant (opens in a new tab)

  12. Enhancing Biosensor Performance with Omniphobic Lubricant-Infused Coatings

    … diagnoses and ineffective treatments. Omniphobic-lubricant infused (OLI) coatings exhibit slippery, self-cleaning characteristics that repel untargeted molecules and microorganisms to augment the biosensor’s performance. In this work, we investigate the proficiency of OLI coatings in two specific …

    mcmaster Repository record for Enhancing Biosensor Performance with Omniphobic Lubricant-Infused Coatings (opens in a new tab)

  13. PDA/PTFE Solid Lubricant Coating for 60NiTi Applications

    … applications, there is need for a suitable solid lubricant coating that can be applied to 60NiTi. A polytetrafluoroethylene (PTFE)-based solid lubricant coating that uses a polydopamine (PDA) adhesive underlayer was developed and evaluated for use on 60NiTi. PDA/PTFE coating was evaluated on …

    arkansas Repository record for PDA/PTFE Solid Lubricant Coating for 60NiTi Applications (opens in a new tab)

  14. Tribological evaluation of lubricant additives under boundary lubrication

    <p>Growing environmental concern is shifting lubricant markets towards synthetic products, which demonstrate better tribological performance than their mineral oil counterpart. Research on potential economic savings stemming from energy wasted through excessive friction and wear estimates the total …

    iastate Repository record for Tribological evaluation of lubricant additives under boundary lubrication (opens in a new tab)

  15. Improved Performance of Bio-lubricant By Nanoparticles Additives

    Nanoparticle additives are proposed to improve lubricant performance under boundary lubrication sliding, through tribofilms formation. Tribofilms consisting of the elements of the nanoparticles (NPs) could form on the sliding surface providing necessary FM and reduction in wear volume loss. The key …

    whiterose Download file for Improved Performance of Bio-lubricant By Nanoparticles Additives (opens in a new tab)

  16. The Effect of Fuel On Automotive Lubricant Degradation

    Fuel is known to mix with automotive lubricants during cold starting of the engine, leading to fuel contamination in the sump. The effect that fuel contamination has on lubricant degradation is not well understood, so is investigated for this work. The effect of selected fuel components …

    whiterose Download PDF for The Effect of Fuel On Automotive Lubricant Degradation (opens in a new tab)

  17. Simulation of Lubricant Properties and their Interactions with Surfaces

    The behaviour of lubricants at operational conditions, such as at high temperatures and pressures, is a topic of great industrial interest. In particular, viscosity and the viscosity-pressure relation are especially important for applications and their determination by computational simulations is …

    soton Download PDF for Simulation of Lubricant Properties and their Interactions with Surfaces (opens in a new tab)

Page 1 of 49