Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"luminous flux"”.

  1. A NEW METHOD FOR CALCULATING LUMINOUS FLUX USING HIGH DYNAMIC RANGE IMAGING AND ITS APPLICATIONS

    … a method of using HDR images to estimate luminous flux (in units of lumens) contributed from light sources and surfaces visible to the camera lens. The goal was to validate this camera-aided method for remote measurement of luminous flux and check its applications in a real lit …

    ku Repository record for A NEW METHOD FOR CALCULATING LUMINOUS FLUX USING HIGH DYNAMIC RANGE IMAGING AND ITS APPLICATIONS (opens in a new tab)

  2. Retention of three brightness discriminations by rats following posterior cortical lesions

    … the discriminanda differed in both luminance and luminous flux. In the second task, the discriminanda differed only in terms of luminous flux. In the third task, the discriminanda differed only in terms of luminance. Following acquisition, half of the animals on each task underwent removal of the …

    ubc Repository record for Retention of three brightness discriminations by rats following posterior cortical lesions (opens in a new tab) Download PDF for Retention of three brightness discriminations by rats following posterior cortical lesions (opens in a new tab)

  3. New measurement standards and methods for photometry and radiometry

    … standards for luminance, spectral radiance and luminous flux developed at the Metrology Research Institute, which is the NMI for optical quantities in Finland. In addition, evaluation of photometer calibration methods is presented followed by a correction method for illuminance responsivity …

    aalto Repository record for New measurement standards and methods for photometry and radiometry (opens in a new tab)

  4. Spatial and Spectral Corrections for Integrating Sphere Photometry and Radiometry

    … efficiency of lighting is expressed in terms of luminous efficacy. It is the ratio of the visible light emitted by the source to the power consumed in the process. The total amount of useful light produced by a source is described as luminous flux, which is often measured using integrating sphere …

    aalto Repository record for Spatial and Spectral Corrections for Integrating Sphere Photometry and Radiometry (opens in a new tab)

  5. Dimming DC–DC LED Drivers: Power Losses, Luminous Efficiency & Best-in-Class

    … drivers regulate the LED current that sets their luminous output, where dimming is an important attribute. Dimming techniques fall in one of two categories: "analog" or "duty-cycled" (pulse-width-modulated), and duty-cycled (PWM) dimming decompose into two further classes: series- or …

    gatech Repository record for Dimming DC–DC LED Drivers: Power Losses, Luminous Efficiency & Best-in-Class (opens in a new tab)

  6. Characterization of Light Emitting Diodes and Photometer Quality Factors

    … measurement setups have been developed for luminous flux and luminous efficacy measurements of LEDs and SSLs. The photometer heads utilized in the measurements have been characterized for the spectral and directional responses. Methods for analyzing the uncertainties of the photometer …

    aalto Repository record for Characterization of Light Emitting Diodes and Photometer Quality Factors (opens in a new tab)

  7. Strategies of Minimising CO2 Emission Associated with LED Lighting Systems in Indoor Applications

    … light sources which can deliver more luminous flux while consuming less energy than conventional light sources. The benefits are: Financial gain for the owner, and low CO2 emissions because of lower energy consumption for the environment with lower waste based on their longer lifetime. …

    auckland-ms Repository record for Strategies of Minimising CO2 Emission Associated with LED Lighting Systems in Indoor Applications (opens in a new tab)

  8. Metrology for III-V Optosemiconductors

    … novel analysis methods have been developed for luminous efficacy, lifetime, and band gap energy of LEDs and multi-junction solar cells manufactured using III-V materials. The lifetime of high-power LEDs was studied by aging different types of LED lamps at room temperature and at elevated …

    aalto Repository record for Metrology for III-V Optosemiconductors (opens in a new tab)

  9. Thermal analysis of high power led arrays

    … to that of fluorescent lamps. Since the total luminous flux generated by a single LED is considerably lower than other light sources, to be competitive the total light output must be increased with higher forward currents and packages of multiple LEDs. However, both of these solutions would …

    gatech Repository record for Thermal analysis of high power led arrays (opens in a new tab)

  10. Integration of Daylighting into Educational (School) Building Design for Energy Efficiency, Health Benefit, and Mercury Emissions Reduction Using Heliodon for Physical Modeling

    This thesis examines the concept of incorporating daylight into a school using a heliodon device and Illuminance Rendering in Cloud for Revit software to create a physical and computer model of how the building will function in its given location as a tool to improve the institution’s economy, …

    rit Repository record for Integration of Daylighting into Educational (School) Building Design for Energy Efficiency, Health Benefit, and Mercury Emissions Reduction Using Heliodon for Physical Modeling (opens in a new tab)

  11. Evaluating the microbial safety status of products from sustainable organic agriculture

    … of ultraviolet treatment (15 watt UV light, luminous flux of 900 lumens) as a food safety intervention in reducing the microbial loads of the water system, in a model aquaponic unit that is growing lettuce, basil and barramundi (Australian Sea Bass). Large Leaf basil, Buttercrunch Bibb …

    iastate Repository record for Evaluating the microbial safety status of products from sustainable organic agriculture (opens in a new tab)

  12. Assessment and optimization of felt living walls in terms of water retention performance and artificial lighting

    … to the findings of this study, Illuminance (as luminous flux per unit area) and PPFD were found to be positively correlated to the height of the module for each pocket. Logar CLH Superflood lamp presented the highest value for both traits, while the lowest values were attributed to CF- UT01 …

    sevilla Repository record for Assessment and optimization of felt living walls in terms of water retention performance and artificial lighting (opens in a new tab)

  13. Design of a hybrid POF-VLC network in indoor environments

    [ES] En los últimos años, la demanda de conectividad inalámbrica ha aumentado exponencialmente, lo que ha puesto una mayor presión sobre las redes inalámbricas basadas en radiofrecuencia (RF). Como alternativa a las redes RF, la VLC (comunicación por luz visible) ha surgido como una posible …

    upv Repository record for Design of a hybrid POF-VLC network in indoor environments (opens in a new tab)

  14. Research on power supplies for oled lamps based on switched capacitor conventers

    … a good dynamic behavior against input voltage or luminous flux variations is obtained. Simulation and experimental results of a URSC step-up converter design example for a 21.8 W OLED lamp array supplied from 48Vdc are presented, in which a maximum energy efficiency η of 92.97% is obtained. The …

    oviedo Repository record for Research on power supplies for oled lamps based on switched capacitor conventers (opens in a new tab)

  15. Technologie zalévání LED pásků epoxidovými hmotami

    Práce se zabývá problematikou zalévání LED pásků epoxidovými hmotami. Rešeršní část obsahuje úvod do fotometrie a shrnuje druhy zalévacích hmot a jejich charakteristiky. V praktické části se zkoumá vliv množství použitého pigmentu na fotometrické veličiny. To je zpracováno pomocí provedených měření …

    brno-tech Repository record for Technologie zalévání LED pásků epoxidovými hmotami (opens in a new tab)

  16. Provozní vlastnosti LED a jejich modelování

    Disertační práce se zabývá vlastnostmi světelných zdrojů LED a jejich statickými a dynamickými změnami v reakci na měnící se provozní podmínky. Na začátku práce je stručně popsána historie svítivých diod, která dovedla LED od neúmyslného pozorování luminiscence až ke světelnému zdroji, který je …

    brno-tech Repository record for Provozní vlastnosti LED a jejich modelování (opens in a new tab)

  17. Změny spektra zářivého toku světelných zdrojů v závislosti na napětí

    Diplomová práce se skládá ze dvou částí. V první části popisuje základní veličiny světelné techniky, základní principy přeměn elektrické energie na světelnou energii, zákony popisující teplotní záření a věnuje se charakteristice teplotních a výbojových světelných zdrojů, které jsou používány k …

    brno-tech Repository record for Změny spektra zářivého toku světelných zdrojů v závislosti na napětí (opens in a new tab)

  18. Měření parametrů LED stmívatelných zdrojů

    Bakalářská práce se zabývá problematikou LED stmívatelných světelných zdrojů. Teoretická část se ze začátku věnuje světlu a základním fotometrickým veličinám, rozebírá zdroje světla a jejich parametry. Dále popisuje princip funkce LED diody, konstrukci, napájení a regulaci jasu LED světelných …

    brno-tech Repository record for Měření parametrů LED stmívatelných zdrojů (opens in a new tab)

Page 1 of 2