Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 156 for “"lumped element"”.
-
Lumped Element Transdirectional and Codirectional Coupler
… component in several microwave applications. Lumped element directional couplers gained a lot of attention due to their compact size. This thesis represents a lumped element model for transdirectional and codirectional couplers. Unlike the classical inductive coupling used for modelling, …
-
Transmon qubits coupled to superconducting lumped element resonators
… qubits coupled to superconducting thin-film lumped element microwave resonators made of aluminum on sapphire. The resonators had a center frequency of around $6\,$GHz, and a total quality factor ranging from 15,000 to 70,000 for the various devices. The area of the transmon junctions was …
-
Theoretical and experimental studies on nonlinear lumped element transmission lines for RF generation
A nonlinear lumped element transmission line (NLETL) consisting of a LC-ladder network can be used to convert a rectangular input pulse to a series of RF oscillations at the output. Three types of lines were studied: a) nonlinear capacitive line (NLCL) where only the capacitive component is …
-
Developments of thick-metal inductors and applications to reactive lumped-element low-pass filter circuits
… for using the passives as building blocks for lumped element-based RF circuits (e.g. Flters, couplers, etc.) which could replace the more-bulky distributed-element circuits. This thesis presents the design, simulation, fabrication using the deep X-ray lithography process, and testing of …
-
On-Chip Bandpass Filter for Superconducting Devices
On-chip lumped element bandpass filters offer a pathway to tightly integrate noise suppression directly at the chip level in superconducting quantum devices. Despite the widespread use of filters in cryogenic qubit setups, co-fabricated lumped element bandpass filters remain relatively unexplored. …
-
Power Divider Miniaturization with a Variable Load
… still too large for our application. The use of lumped elements successfully shrinks the design to fit within the desired space. Both the meander line design and lumped element design were printed on RO4350, a Rogers printed circuit board material. The meander line design meets all of the …
-
Time-domain based steady-state initialization for the EMTP
… yields a simple, efficient solution for linear, lumped element networks. However, the basic algorithm cannot be easily extended to handle nonlinear and variable structure networks. A time-domain based steady-state initialization algorithm is formulated for the three classes of lumped element …
-
RF MEMS-Based Frequency Dependent Power Limiters
… superconductor digital receivers is proposed. A lumped-element niobium-based filter is used as a protection circuit. It consists of lumped-element resonators formed using spiral inductors and metal- insulator-metal capacitors integrated on a multilayer niobium process. The circuit operates as a …
-
A nonlinear hybrid and VR stepping motor analysis via an integrated finite element and lumped parameter modeling technique
… magnetic model. Nonlinear two dimensional finite element analysis is combined with nonlinear lumped element modeling to create a three dimension lumped model. The two dimensional finite element analysis is used to numerically calculate the effective reluctance function of the motor tooth region. …
-
Development of Modeling, Simulation and Measurement Methodologies for Signal Integrity Analysis of High-Speed Packaging Interconnects
… domain and time domain. SPICE compatible lumped-element models are developed. The methodologies and the lumped element models are verified by frequency domain and time domain measurement.
-
Investigation of Scaling Effects for a Synthetic Jet Actuator Using High and Low Fidelity Analyses
… synthetic jet actuators using Ansys-CFX and a Lumped Element Model (LEM). Synthetic jets or zero net mass-flux devices use a vibrating diaphragm to generate an oscillatory flow through a small orifice. A synthetic jet actuator can be used on MAVs as thrust generator or fixed on an airfoil for …
-
Design of two-axis capacitive accelerometer using MEMS
… above specifications were calculated using lumped element approximation and the results were used for initial layout of it. A finite element analysis code (ANSYS) was used to perform simulations of the accelerometer under various operating conditions and to determine the optimum …
-
Superconducting Microwave Filters
… In this thesis, design of highly miniaturized lumped element wideband and bandstop filters is investigated and some challenges are addressed. The filters are fabricated by the HYPRES process and therefore can be integrated with the SME receiver on the same chip. In a wideband filter, the …
-
UHF RFID Antenna Impedance Matching Techniques
… and broadband (±5% of center frequency) lumped element designs also use inductive matching strips. Narrowband, lumped element design is accomplished through Smith Chart matching assuming lumped antenna elements. The broadband lumped element design is accomplished through a circuit …
-
High aspect ratio microstructure coupler
… single or multiple transmission lines with lumped element equivalent circuits. One category of lumped elements that has not been extensively implemented is high aspect ratio lumped elements. High aspect ratio lumped elements fabricated with deep X-ray lithography are able to take advantage …
-
Small -Signal Distributed FET Modeling
… performance is compared with that of a standard lumped-element model. Skin effect in the gate conductor is analyzed. High-frequency measurement issues are also discussed.
-
AN INVESTIGATION INTO QUASI-TUNABLE RF PASSIVE CIRCUIT DESIGN
… For the analysis, the S-parameters of a 90ᵒ Lumped Element Hybrid coupler are derived in terms of even mode and odd mode coupler responses using mathematical functions that relate the S-parameters of each circuit to their associated even mode Q, and odd mode Q factors The results of this …
-
An Analysis and Comparison of Linear Phase Bandpass Filters
… discussed, it is impossible to realize a stable lumped-element filter having this ideal characteristic. This has made it necessary to find ways to physically approximate such a characteristic. Some of the more widely used methods will be compared and analyzed in this paper.
Page 1 of 8