Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 329 for “"machining process"”.

  1. Effect of electromagnetic field in machining process

    … of magnetic field on the dynamics of cutting process is investigated. The flank wear of widely used cemented carbide tool against the ferromagnetic carbon steels decreased dramatically in the presence of magnetic field even when it is extremely weak. In turning and milling process, the …

    nus Repository record for Effect of electromagnetic field in machining process (opens in a new tab) Download file for Effect of electromagnetic field in machining process (opens in a new tab)

  2. Polygon subdivision for pocket machining process planning

    <p>In the process planning for pocket machining, selection of the optimal tool sizes and minimizing the number of plunging operations are among the most important factors in minimizing the machining time. This thesis presents a new approach for optimal tool selection of arbitrary shaped pockets …

    iastate Repository record for Polygon subdivision for pocket machining process planning (opens in a new tab)

  3. Generic solid modelling based machining process simulation

    <p>In machining, the ability to automatically generate an optimum process plan is an essential step toward achieving automation, higher productivity, and better accuracy. These requirements are particularly emphasized in die and mold manufacturing, where complex tool and workpiece geometries …

    mcmaster Repository record for Generic solid modelling based machining process simulation (opens in a new tab)

  4. Optimisation of the aluminium compressor impeller machining process

    The research involved the optimisation of various machining operations for the manufacture of automotive turbocharger impellers. Phase 1 work comprised a capability study of the Al-Si C355 impeller machining process within Doncasters Sterling. The results highlighted that both C\(_p\) and …

    birmingham Download PDF for Optimisation of the aluminium compressor impeller machining process (opens in a new tab)

  5. ANALYSIS OF MACHINING PROCESS USING THE FINITE ELEMENT METHOD

    The orthogonal machining process is modelled using the finite element method. Starting with fundamental work material properties and cutting conditions, the distribution of flow stress within the chip and workpiece is computed. Plastic and elastic tool-chip friction are accounted for. The …

    nus Repository record for ANALYSIS OF MACHINING PROCESS USING THE FINITE ELEMENT METHOD (opens in a new tab) Download file for ANALYSIS OF MACHINING PROCESS USING THE FINITE ELEMENT METHOD (opens in a new tab)

  6. Modeling and simulation of micro electrical discharge machining process

    … understand the single discharge material removal process in micro-EDM. However, due to the stochastic nature and complex process mechanism, micro-EDM, including its material removal mechanism, has not been fully understood. Process modeling is an effective way to learn and predict the process. …

    nebraska Repository record for Modeling and simulation of micro electrical discharge machining process (opens in a new tab)

  7. Machining process model for intelligent rough machining of sculptured parts

    … dies, interest was manifested in reducing the machining time, of which rough machining represents an important component. This is usually proportional to the quantity of material that has to be removed. In the case of moulds and dies that quantity can be significant. One way to reduce the rough …

    uvic Repository record for Machining process model for intelligent rough machining of sculptured parts (opens in a new tab)

  8. The machining process of Zircaloy-4 nuclear fuel rod end-caps

    … at high speeds. A side-effect of high speed-machining of ductile materials is galling. If tight dimensional tolerances are required, this issue can result in parts not meeting specifications. Furthermore, an added challenge of Zry-4 is that it has a high probability to ignite during machining …

    nwu-za Repository record for The machining process of Zircaloy-4 nuclear fuel rod end-caps (opens in a new tab)

  9. Investigation of the effect of tool geometry on the machining process

    … By observing the tool geometry changes in the machining process with white light interferometry, a new tool wear geometry model has been proposed. A non-destructive tool wear measurement is discussed as well. In addition, this study presents the machining result comparison between the new and …

    mcmaster Repository record for Investigation of the effect of tool geometry on the machining process (opens in a new tab)

  10. MATERIAL PERSPECTIVE AND CUTTING EDGE RADIUS EFFECT ON ULTRA-PRECISION MACHINING PROCESS

    In ultra-precision machining, the undeformed chip thickness can be few microns and even approach the nanoscale. At this range, material-related issues are gaining importance due to the microstructural effect on the tool-work interaction phenomena. Thus, based on the material hardness, an innovative …

    nus Repository record for MATERIAL PERSPECTIVE AND CUTTING EDGE RADIUS EFFECT ON ULTRA-PRECISION MACHINING PROCESS (opens in a new tab) Download file for MATERIAL PERSPECTIVE AND CUTTING EDGE RADIUS EFFECT ON ULTRA-PRECISION MACHINING PROCESS (opens in a new tab)

  11. Assessment of metal machining process parameters and the development of adaptive control

    … and uncoated and coated carbide inserts when machining engineering steels with different carbon contents and microstructures. Particular attention has been paid to behavioural patterns with a near-eutectoid steel of variable microstructures. After cutting, the surface roughnesses of these …

    adelaide Repository record for Assessment of metal machining process parameters and the development of adaptive control (opens in a new tab)

  12. A study of the abrasive waterjet micro-machining process for amorphous glasses

    … review into the current state of micro-machining and abrasive waterjet (AWJ) machining technologies and the associated sciences has been carried out. It has revealed that a micro-AWJ possesses many traits which are desired by industry, but little research has been devoted to its …

    unsw Repository record for A study of the abrasive waterjet micro-machining process for amorphous glasses (opens in a new tab)

  13. Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters

    … been dedicated by researchers to predict post process stress in a workpiece using analytical, experimental, and numerical modeling methods. Nonetheless, no methodology is available that can express the cutting process parameters and tool geometry parameters as functions of machined residual …

    gatech Repository record for Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters (opens in a new tab)

  14. Understanding of cutting tool edge preparations and their impacts on machining process performance

    … that were recently developed for micro-machining due to its impact on cutting forces and stresses, tool life, temperature distribution and surface integrity. The most frequent tool edge preparations include round edge, chamfered edge and sharp edge. It is not easy to determine, for a …

    ets-quebec Download PDF for Understanding of cutting tool edge preparations and their impacts on machining process performance (opens in a new tab)

  15. A Study of the Abrasive Waterjet Machining Process for Carbon Fibre-Reinforced Polymers

    … on the progress of abrasive waterjet (AWJ) machining, an experimental study of the AWJ machining of carbon fibre-reinforced polymers (CFRPs) of various thicknesses was conducted, showing that clean cuts can be achieved with good processing rates. The effect of process parameters on the …

    unsw Repository record for A Study of the Abrasive Waterjet Machining Process for Carbon Fibre-Reinforced Polymers (opens in a new tab)

Page 1 of 17