Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"macro fiber composite"”.
-
Using Macro-Fiber Composite Actuators for Aquatic Locomotion
… for an autonomous underwater vehicle using Macro-Fiber Composite (MFC) actuators. The swimming system draws inspiration from the motion of carangiform fish, which limit their body motion while rapidly oscillating their caudal tail fin. The foundation for the bio-inspired swimming system is …
-
Electrical Properties of Macro-Fiber Composite Actuators and Sensors
Piezoceramic fiber composite (PFC) actuators and sensors offer many advantages over conventional monolithic piezoceramic devices. Conformable, durable and, when equipped with interdigitated electrodes (IDEs), more responsive than regular monolithic devices, PFCs promise to revolutionize the …
-
Macro Fiber Composite Actuated Unmanned Air Vehicles: Design, Development, and Testing
… and fabricate in a repeatable fashion on thin, composite-wing micro-air-vehicles. Assembly is complex and time consuming. A type of piezoceramic composite actuator commonly known as Macro Fiber Composite (MFC) is used for wing morphing. The actuation capability of this actuator on fiberglass …
-
Macro Fiber Composite Actuated Control Surfaces with Applications Toward Ducted Fan Vehicles
… morphing, a piezoelectric device known as Macro Fiber Composites is used. These devices are embedded in the skin of the vehicles control surface, and when actuated, they cause the control surface to increase or decrease camber. This thesis describes experiments that were performed to …
-
Integration of Macro-Fiber Composite Material on a Low Cost Unmanned Aerial System
… a simulation environment for mechanical and Macro-Fiber Composite (MFC) actuated ailerons in a Skywalker 1880 UAV using model reference adaptive control law. This work will contribute to a baseline model for the research and development of future UAV with morphing control surfaces up to a …
-
Dual Mode Macro Fiber Composite-Actuated Morphing Tip Feathers for Controlling Small Unmanned Aircraft
… control surfaces and uses for smart materials. A Macro Fiber Composite (MFC), a smart material, takes advantage of the piezoelectric effect and provides an attractive alternative actuator to servos in the Small Unmanned Aerial Systems (SUAS) regime of flight. This research looks to take MFC …
-
Finite Element Modeling of Macro Fiber Composite Actuators with Application to Wing De-icing
… technique is studied in which lightweight Macro Fiber Composite (MFC) actuators are used to break the adhesive bond between the leading edge of a wing and an accumulated ice layer. The concept for this technique relies on the fact that when a structure is excited at its natural frequencies, …
-
Aerodynamic and Electromechanical Design, Modeling and Implementation Of Piezocomposite Airfoils
… and sensing over a wide range of frequencies. A Macro-Fiber Composite is a type of piezoelectric device that offers structural flexibility and high actuation authority. A challenge with piezoelectric actuators is that they require high voltage input; however the low power consumption allows for …
-
Dynamics and Control of Membrane Mirrors for Adaptive Optic Applications
… and a membrane strip augmented with multiple macro-fiber composite bimorphs. The later structure is studied under two actuation configurations. In the first configuration, both actuators act in bending. In the other configuration, one actuator acts in bending and the second acts in tension. …
-
Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber Composites
… However, actuators with piezoceramic fibers and interdigitated electrodes have risen to the forefront of the intelligent structures community due to their increased actuation capability. However, their fiber-reinforced construction causes them to exhibit anisotropic piezomechanical …
-
Designing Morphing Airfoils for Improving the Aerodynamic Characteristics
Morphing airfoil models which use macro fiber-composite actuators (piezo-ceramic type) to the shape of the upper skin were designed and fabricated. The models have shape close to the NACA 4415 airfoil with a chord of 150mm and a span of 158mm. Preliminary measurements have been made of the …
-
Simulation Study of Tremor Suppression and Experiment of Energy Harvesting with Piezoelectric Materials
… PVDF (polyvinylidene fluoride) films and MFC (macro fiber composite) films, are used to harvest mechanical energy and used as actuators to suppress hand tremors. However, due to some shortages of the materials, these two types of materials are not used as actuators to suppress the wrist …
-
Characterization of Oscillatory Lift in MFC Airfoils
… of an airfoil with an oscillatory morphing, Macro-fiber composite (MFC) trailing edge. Correlation of the airfoil lift with the oscillatory input is presented. Modal analysis of the test airfoil and apparatus is used to determine the frequency response function. The effects of static MFC …
-
Design, Fabrication, and Testing of a Proprioceptive Electroadhesion Pad for Space Applications
… to obtain optimum surface adhesion, the use of Macro Fiber Composite (MFC) actuators were embedded on the electroadhesion pad. Fabrication methods involving the use of chemical etching process on copper clad composites were used in order to test the pads and determine the level of adhesion …
-
Design and control of a smart fin using piezoelectric actuators
… angle of the fin. The fin is activated by a composite laminated plate that has two active piezoelectric layers. The prototype of the smart fin is assembled using Macro Fiber Composite (MFC actuator model M8557, Smart Material Co); Control algorithms for rotating the fin when subject to …
-
Achieving Wing-Like Structural Response With Piezocomposite Unimorph Thin Plates
… angle, thickness-ratio of the active piezocomposite to the inactive substrate, and portion of the fixed end of the cantilevered structure that is fixed in the chordwise direction. For harmonically actuated cases, the resonant flapping frequency is also examined. Performance metrics for …
-
Use of Piezoelectric Actuators to Effect Snap-Through Behavior of Unsymmetric Composite Laminates
… behavior of simple unsymmetric cross-ply composite laminates is examined. Many unsymmetric laminates have more than one stable room-temperature shape and can be snapped through from one stable shape to another. In this new concept for morphing structures, one or more piezoelectric …
-
High Frequency Modeling and Experimental Analysis for Implementation of Impedance-based Structural Health Monitoring
… point. Preferred excitation frequencies for macro-fiber composite (MFC) active sensors are statistically determined for a long composite boom under development for use in rigidizable inflatable space structures.
-
Experimental and theoretical control of a smart projectile fin using piezoelectric bimorph actuator
… fin. The fin is actuated using the piezoelectric macro-fiber composite (MFC) bimorph actuator which is completely enclosed within the aero-shell. The actuator is composed of two Macro Fiber Composites (MFC's), manufactured by Smart Material Co. The presented smart fin design minimizes the volume …
-
Active Control of Nonlinear Panel Flutter at Supersonic Speed Using Aeroelastic Modes and Self-Sensing Piezoelectric Actuators Under Yawed Flow Angle
… and symmetrically laminated orthotropic composite plates, the limit-cycle oscillations converged with six in vacuo natural modes at zero yaw angle. However, as laminated composite plates undergo the effect of an arbitrary yawed flow angle, complicated characteristics emerge when …
Page 1 of 2