Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 142 for “"manual control"”.

  1. Manual Control of Higher Order Systems

    … operators employ internal models to aid in the control of complex dynamic systems is prevalent in the psychological and manual control literature. Yet empirical evidence and the subsequent analytical representation of such models is scarce.

    uiuc Repository record for Manual Control of Higher Order Systems (opens in a new tab)

  2. Input-shaped manual control of helicopters with suspended loads

    … makes load positioning difficult and can degrade control of the helicopter. This dissertation investigates the use of input shaping (a command-filtering technique for reducing vibration) to mitigate the load swing problem. The investigation is conducted using two different, but complementary, …

    gatech Repository record for Input-shaped manual control of helicopters with suspended loads (opens in a new tab)

  3. Topological relations between postural configuration and manual control performance

    … during bipedal stance and performance on manual control task. Postural control is influenced by the interaction of the constraints imposed on perceptual motor workspace. The manipulation of any constraints would bring the individual to change the body configuration to maintain stable and …

    uiuc Repository record for Topological relations between postural configuration and manual control performance (opens in a new tab)

  4. The Integration of Information Relevant to a Manual Control Task

    … and response proximity, subjects performed a manual control task in which discrete information was integrated with the manual control task. Four different display formats were manipulated within subjects and two response configurations were manipulated between groups. It was predicted that: …

    uiuc Repository record for The Integration of Information Relevant to a Manual Control Task (opens in a new tab)

  5. The effects of whole-body vibration on performance of a complex manual control task

    This thesis investigates continuous manual control performance during exposure to z-axis whole-body vibration at frequencies between 0.5 and 10.0 Hz. The task involved first-order pursuit tracking with a simultaneous discrete target acquisition task. A major aim of the work was to determine the …

    soton Download PDF for The effects of whole-body vibration on performance of a complex manual control task (opens in a new tab)

  6. Intelligent support of interactive manual control : design, implementation and evaluation of Look-Ahead Haptic Guidance

    … offer real-time information relevant to a user's manual control of an interactive system; however, effective presentation of this information creates many challenges. We consider how to use force feedback to convey information to a user about dynamic system control space constraints that have been …

    ubc Repository record for Intelligent support of interactive manual control : design, implementation and evaluation of Look-Ahead Haptic Guidance (opens in a new tab) Download PDF for Intelligent support of interactive manual control : design, implementation and evaluation of Look-Ahead Haptic Guidance (opens in a new tab)

  7. On waveform analysis, the adaptive task technique, and the effect of vibration on manual control skill

    … research evidence on the effect of vibration on manual control ability. Findings are presented in terms of percentage increment or decrement in performance relative to performance without vibration in the range 0-0.6Rms'g'. Primary task performance was found to vary by as much as 90% between …

    aston Download PDF for On waveform analysis, the adaptive task technique, and the effect of vibration on manual control skill (opens in a new tab)

  8. A comparison of manual, voice, and automated control of a teleoperator viewing system

    … This experiment investigated options for camera controls which may be less interfering with manipulator operations than conventional manual controls. Specifically, the experiment compared performance of remote maintenance tasks with control by computer word recognition and automation of camera …

    utk-theses Repository record for A comparison of manual, voice, and automated control of a teleoperator viewing system (opens in a new tab)

  9. OPTIMISATION OF NEONATAL VENTILATION USING NOVEL TECHNIQUES Hypoxia, hyperoxia and targeting optimal oxygenation

    … particular focus on closed-loop automated oxygen control (CLAC) systems and their effect on oxygen saturation targeting and clinical outcomes. <br/><br/>Methods: A series of studies were undertaken. <br/>• A retrospective observational study on the effect of cumulative hypoxia and socioeconomic …

    kings Repository record for OPTIMISATION OF NEONATAL VENTILATION USING NOVEL TECHNIQUES Hypoxia, hyperoxia and targeting optimal oxygenation (opens in a new tab) Download PDF for OPTIMISATION OF NEONATAL VENTILATION USING NOVEL TECHNIQUES Hypoxia, hyperoxia and targeting optimal oxygenation (opens in a new tab)

  10. Teleoperation from movable bases : modeling, analysis, design and experiments with a hydraulic motion platform

    There are manual control and teleoperation systems in which the operator is subject to base motion. Examples are aircraft piloting and joystick control of heavy hydraulic machines such as excavators. This thesis presents a new framework for the modeling, analysis, design and evaluation of …

    ubc Repository record for Teleoperation from movable bases : modeling, analysis, design and experiments with a hydraulic motion platform (opens in a new tab) Download PDF for Teleoperation from movable bases : modeling, analysis, design and experiments with a hydraulic motion platform (opens in a new tab)

  11. The Effect of Active and Passive Control on Air Traffic Controller Dynamic Memory

    … investigate the effect of automated and passive control on air traffic controller dynamic memory. The study consisted of two experiments, each involving a realistic ATC scenario for radar approach control with a mix of arriving and departing traffic. In Experiment I, the subjects performed manual …

    embry-riddle Repository record for The Effect of Active and Passive Control on Air Traffic Controller Dynamic Memory (opens in a new tab)

  12. Cost effective management strategies for platinum mine cooling systems

    … load clipping and energy efficiency through control strategies. In this study, a mine was reviewed by evaluating the layout, system specification, cooling requirements and operations. A simulation model was developed together with a cost effective control and monitoring strategy. The strategy …

    nwu-za Repository record for Cost effective management strategies for platinum mine cooling systems (opens in a new tab)

  13. Variations in Control and Display Gain in a First Control Order Compensatory Manual Tracking Task

    … many factors that contribute to the optimal manual control of a system by a human operator (HO). Two such variables include control gain and display gain. Of particular interest to the following experiment is the contribution of these two variables to the manual tracking performance of any HO …

    embry-riddle Repository record for Variations in Control and Display Gain in a First Control Order Compensatory Manual Tracking Task (opens in a new tab)

  14. Identifying The Common Patterns Or Trends That Emerge When Analyzing Past Accidents And Incidents Involving Autopilot Systems

    … may have been inadequately prepared to assume manual control during automation failures. This study employed a qualitative approach, including semi-structured interviews with aviation professionals such as airline flight instructors, line check pilots, flight standards evaluators, and an FAA …

    nodak Repository record for Identifying The Common Patterns Or Trends That Emerge When Analyzing Past Accidents And Incidents Involving Autopilot Systems (opens in a new tab)

  15. A Review and Analysis of Precision Approach and Landing System (PALS) Certification Procedures

    … three modes of operation; fully automatic, pilot manual control based on cockpit displays of glide slope and centerline error data, and pilot manual control based on approach controller talk down. Whether performing a fully automatic or a manual approach, consistent and reliable operation of the …

    ut-knoxville Repository record for A Review and Analysis of Precision Approach and Landing System (PALS) Certification Procedures (opens in a new tab)

  16. Design and implementation of a Rayleigh pulse forming network for automated control

    … with end user interaction in mind. In order to control this device an ecosystem is designed to control the PFN hardware through a manual control interface and a communication protocol. Characterization of the pulse output validates the critical design metric of low variance energy delivery

    ttu Repository record for Design and implementation of a Rayleigh pulse forming network for automated control (opens in a new tab)

  17. Programming by demonstration for dual-arm manipulation

    Motivated by challenges operators face with manual control tasks, including fatigue and workload management, this research explores the adoption of a semi-autonomous control method to improve work environment quality and task metrics in controlled situations. Building upon the success of …

    bu Repository record for Programming by demonstration for dual-arm manipulation (opens in a new tab)

  18. The implementation and testing of a robotic arm on an autonomous vehicle

    … is successfully implemented for wireless manual control of the arm. Visual and thermal cues are realized with an onboard camera and a collocated thermal sensor. Future work suggests investigations for full autonomous arm control without manual operator intervention based on sensor cues and …

    nps Repository record for The implementation and testing of a robotic arm on an autonomous vehicle (opens in a new tab)

  19. Requirements for satisfactory handling qualities of manned spacecraft

    … handling qualities when the pilot is performing manual control. This is done primary via the analysis of various historic spacecraft. Partial requirements verification is performed via the creation of a simulated pilot used to determine limits of satisfactory vehicle performance. Partial …

    texas Repository record for Requirements for satisfactory handling qualities of manned spacecraft (opens in a new tab)

Page 1 of 8