Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"mass flow controller"”.
-
An Improved Thermal Mass Flow Controller for Hazardous and Precision Applications
A new mass flow controller has been designed which responds very rapidly to changes in control settings. The design was evolved after carefully studying the internal flow and the sources for thermal lag and other non-linear behavior. After discussing an overview of the basic mass flow controller …
-
Study of accumulation of gases in vacuum systems: Measurement of gas transport properties of polymeric films
… pressure difference along the system during gas flow experiments. Two cases were considered. First, the governing partial differential equation was solved analytically assuming a constant flow of gas into the system. Experimentally, a low-flow mass flow controller provided the constant flow of …
-
An improved determination of calibration gas corrections for a typical thermal mass flowmeter design
<p>The mass flow controller, or MFC, is a thermal flow device used extensively for the measurement and control of hazardous and corrosive process gases in the semiconductor industry. Calibration of the mass flow meter is conventionally performed using benign, non-hazardous surrogate gases, such as …
-
Prediction of time lag in vacuum tubes and its implications for characterization of membranes in constant volume systems: Effect of resistance-free accumulation tank
… experimental pressure responses in two different flow cases, a constant flow and a time-dependent flow at a tube entrance. The former case was realized by using a low-flow mass flow controller as a flow source. The latter case was realized by using a homogeneous polymeric film, whose one side was …
-
Design and installation of a field ionization test chamber for ion thrusters
… is constructed. This new design incorporates a mass flow controller for propellant flow rate measurements, a high-voltage source-measure unit for ionization current measurements, and a linear shift with position feedback for adjusting the distance between the carbon nanotubes and the counter …
-
Optically accessible bench-scale fast pyrolysis reactor for in-situ analysis using Fourier transform infrared spectroscopy
… developed to analyze the in-situ reaction of biomass feedstock during the initial stage of fast pyrolysis. A Fourier Transform Infrared (FTIR) Spectroscopy, analytical instrument was modified to allow the light source to pass through the optical pyrolysis reactor for time-resolved measurements …
-
Assessment of nitrogen oxide destruction in heavy-duty diesel engines by injecting nitric oxide into the intake.
… was injected into the intake manifold through a mass flow controller in order to assess NOx decomposition at various loads and concentrations. By comparing the integrated values of NO injected into the intake and exhaust (as a control), the destruction % of NOx were calculated. NO was injected …
-
Laminar flame speed of lithium ion battery gas
… buy promising and due to fouling of the Coriolis Mass flow controller (MFC) only 25% of the DMC tests were completed but preliminary results indicate the system is full functional. In parallel, chemical kinetic mechanism reduction methods are evaluated, with the DRGEP method providing the best …
-
Cloud condensation nuclei spectra: measurement techniques and ambient sampling in the southeastern United States
… CCN Counter in the form of an Arduino microcontroller and a mass flow controller (MFC) have increased the robustness and flexibility of CCN spectra measurements. The supersaturation generated during dynamic flow operation was comprehensively characterized. A set of calibration experiments …
-
Methods for the Detection of Subterranean Methane Leakage
… pipeline experiment where a copper pipe and mass flow controller were used to mimic a natural pipeline leak close to the surface. The methane-stressed and healthy vegetation were measured daily using a handheld spectrometer alongside two other forms of stressed vegetation. The analysis of the …
-
Design of Acoustic Wave Sensor System for Detection of BTEX in Gas Phase
… amount of BTEX was released into a nitrogen flow stream that brought the mixture of Nitrogen and BTEX to the sensor. The concentration of analytes was controlled through a gastight syringe attached to a syringe pump. The nitrogen flow was controlled by a LabVIEW program and mass flow …
-
Development and Validation of a Modular, Multi-point Phi Meter for Measurement of Global Equivalence Ratio
… a fire and report the equivalence ratio, the mass ratio of fuel to oxidizer in the fire, which relates to the production of toxic products. To make phi meters more useful for fire research, a design was built that focuses on modularity, portability, and the ability to process more than one …
-
Matilda: a mass filtered nanocluster source
… controlled, ranging from 0.07 to 1torr, using a mass flow controller. The mean cluster size was found to be a function of relative partial pressure (He/Ar), sputtering power, and aggregation length. The kinetic energy distribution of ionized clusters was measured with the RFA. The maximum ion …
-
Optical and electrochemical transduction of calixarene host-guest chemistry
… involving coated optical fibres together with a mass flow controller were also earned out demonstrating the potential of this chromogemc calixarene for the detection of ppm levels of ammonia. The performance of sodium selective electrodes based on the monoacid denvatives of tetramethyl and …
-
Computer data acquisition, control, and analysis for the University of Tennessee at Chattanooga's internal combustion engine labratory
… the pressure drop across the Meriam laminar flowelement. This signal was also calibrated used an inclined manometer.Output signals from all transducers and the gas analyzers were supplied to three EXP-16 boards according to their ranges. The OMEGA EXP-16 boards are channel multiplexers. They …
-
Evaluation of the selective nitrogen oxides recirculation technique using activated carbon.
… with four thermocouples, an in-line heater, a mass flow controller and a Rosemont Analytical NOx analyzer. Using temperature controlling devices the bench model system data was used to characterize two different types of activated carbon. Inside bed temperatures as well as flow rates of the …
-
Hot jet ignition delay characterization of methane and hydrogen at elevated temperatures
This study contributes to a better understanding of ignition by hot combustion gases which finds application in internal combustion chambers with pre-chamber ignition as well as in wave rotor engine applications. The experimental apparatus consists of two combustion chambers: a pre chamber that …
-
Recovery of Natural Gas Equipment Emissions into Gas Compression Engines for the Reduction of Potential Greenhouse Gas Emissions
… considered for this research were pneumatic controllers (PCs), reciprocating compressor vents, and the engine’s open crankcase breather. The compressor vent and PC emissions were simulated using a mass flow controller (MFC) and flowed into the engine using two separate methods: (1) directly …
-
Modeling and experimental process optimization for a SiH4 + H2 surface wave plasma discharge for silicon photovoltaics
… at 10 nm/s and could be increased if a higher flowrate mass flow controller was used. Film thickness was measured via profilometry with verification through SEM imaging, while the crystallinity was determined via peak fitting of Raman spectra. A distinct transition from nc-Si to a-Si was …
-
Řízení systému rekuperace značkovacího plynu
Tato diplomová práce se zabývá návrhem, softwarovou realizací a experimentálním ověřením automatizovaného systému pro rekuperaci helia, jehož účelem je minimalizace ztrát tohoto vzácného plynu při detekci netěsností. Hlavním cílem bylo vytvořit řídicí program pro programovatelný logický automat v …