Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"master alloy"”.
-
A feasibility study on the effect of an Al-C master alloy on the microstructure and mechanical properties of the B319 cast aluminum alloy
Aluminum alloys have a high strength to weight ratio (x2 of most steel alloys) and are therefore excellent candidates for use in dynamic weight-sensitive designs (e.g. the aerospace, marine, and automotive industries). The B319 aluminum alloy is currently used in complex cast automotive parts, such …
-
Grain refinement of magnesium alloy AZ91E
… used to develop a novel grain refiner Al-SiC master alloy for AZ91E Mg alloys. When the Al-SiC master alloy was added to molten AZ91E alloy, the Al matrix melted and allowed the SiC particles to distribute homogeneously throughout the molten AZ91E alloy. After addition of 0.1 wt.% Al-SiC …
-
An analysis of the grain refinement of magnesium by zirconium
… particle size and morphology both in the master alloy and grain refined samples, while an AccuSizer 770 Photozone/Light Obscuration instrument was used to measure total particle size distributions in the master alloy and grain refined samples. Transmission Electron Microscopy (TEM) was …
-
The Effect of Powder Characteristics and Processing Conditions on the Microstructure and Mechanical Properties of Titanium Alloys Made by Powder Forging
… produce Ti and Ti-6Al-4V rocker arms using pre-alloyed and blended elemental powders. Green powder compacts with high relative density were manufactured by warm compaction. Due to the characteristics of raw powders, interlocking and cold welding are the main mechanisms for HDH powder compaction, …
-
Fabrication of graphene-based master alloys for the development of B319 aluminum alloy-graphene composites with enhanced tribological properties
… and reduce CO₂ emissions. The B319 aluminum (Al) alloy finds widespread use in automotive powertrain components due to its low density, good strength, and excellent castability. However, the poor tribological properties of the B319 Al alloy hinder its broader application in powertrain components. …
-
Control of self-propagating high-temperature synthesis derived aluminum-titanium carbide metal matrix composites
… of the SHS products include densification, melt alloying (SHS reaction products are used as a master alloy), and die casting techniques. Matrix alloy additions should be controlled to prevent unwanted reactions between the matrix and the reinforcement. In the present study, Ti + C + X [right …
-
Processing and mechanical properties of cast aluminum containing scandium, zirconium, and ytterbium
A series of aluminum alloys containing additions of scandium, zirconium, and ytterbium were cast to evaluate the effect of partial ytterbium substitution for scandium on tensile behavior. Due to the high price of scandium, a crucible-melt interaction study was performed to ensure no scandium was …
-
New approaches to casting hypereutectic Al-Si alloys to achieve simultaneous refinement of primary silicon and modification of eutectic silicon
Hypereutectic Al-Si alloys are of increasing interest for applications that require a combination of light weight and high wear resistance, such as pistons, liner-less engine blocks and pumps. The wear resistance of this class of alloys is due to the presence of hard primary Si particles formed …
-
The effect of transition metal additions on double oxide film defects in Al alloy castings
… additions on the double oxide film defects in Al alloys. A bubble trapping experiment was initially conducted, which deliberately trapped an air bubble inside the aluminium melt for a period of time in three different Al alloys (Commercial purity aluminium, 2L99(Al-7Si-0.35Mg) and Al-5Mg alloy), …
-
Effect of Alloying Additions and Heat Treatment on Localized Corrosion Susceptibilities of AA7xxx Alloys Grain Refined with Al-5Ti-1B Master Aloy
… of this research was to identify the effect of alloying additions and heat treatment on the localized corrosion mechanisms of AA7xxx alloys that have been grain refined with an Al-5Ti-1B master alloy. The major alloying elements, Zn (3.5 – 6.5 wt. %), Mg (1.5 – 2.5 wt.%), Cu (0 – 3 wt. %), and …
-
The effects of post inoculant additions on ductile iron fade
… process was utilized in this study. The master alloy was a 6% magnesium ferrosilicon, barium containing, alloy. The experimental inoculants used for the study were chosen based on their specific chemical composition. Experimental inoculant A, a foundry grade ferrosilicon 75% alloy, was …
-
Hot Tearing Susceptibility of Single-Phase Al-3.8 wt%Zn-1 wt%Mg Alloy Using the Constrained Rod Solidification Experiment: Influence of 1.2 wt%Fe Addition and Grain Refinement
… the adaptation of the high strength Al wrought alloys such as the 2xxx and 7xxx series in near net-shaped manufacturing using the high pressure die casting (HPDC) process. However, the obstacle for this adaptation is the high susceptibility to hot tearing during the solidification of these …
-
Liquid Metal-Based Interfacial Engineering for Nano Materials and Systems Design
… post-transition metals and alloys, referred to as liquid metals, represent an emerging family of functional materials for sensing, catalysis, and many other energy-related fields. This thesis explores liquid metal-based strategies for fabricating novel functional metal …
-
Mechanisms of Inclusion Filtration and Fluidity Using Prefil Measurement on Al-7Si-0.4 Mg Alloy Melt
… done for four locations in the plant; two before master alloy addition Al-Ti-B and two after Al-Ti-B. The two before Al-Ti-B additions were where the metal was melted (CL) and then first degassed (D-EL). The other two measurements occurred before (LBD) and after a second degassing process (LAD). …
-
Ensuring the in vitro degradation reproducibility of powder metallurgy processed Mg 0.6Ca system
… via powder blending of pure magnesium and master alloy Mg-10Ca powders. Specimens of seven different porosities, from 3% to 21%, were produced by varying sintering temperatures. Specimens with heterogeneous grain size distributions were obtained by surface modification of pure magnesium …
-
Development of Niobium Boron grain retainer for aluminium silicon alloys
… addition is well established for wrought alloys, however in the case of casting alloys, the practice of adding grain refiners and the impact on castability is not well established. The addition of well known Al-5Ti-B grain refiner to casting alloys with silicon (Si) content above 3 wt.% is …
-
Advances in Sintering of Powder Metallurgy Steels
… be improved with the increase of overall alloying content [5], however, if overall alloying content is to be kept at a minimum, the concept of lean PM steel design is one worth investigating; where a lean steel entails that each and every alloying addition is utilized to its maximum …
-
The Synthesis of High Strength Titanium Alloy and Titanium Alloy Matrix Composite by Powder Compact Extrusion from Blended Elemental Powders
… powders is an effective way to produce titanium alloys and titanium matrix composites with high performance. Its main advantage is cost effectiveness, where high cost pre-alloyed powders are replaced by lower cost elemental powders and a need for lengthy sintering times to achieve sufficiently …