Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 220 for “"matching network"”.

  1. A reconfigurable impedance matching network

    … To address this challenge, a reconfigurable matching network is essential. Moreover, such a network must be compact and suitable for integration with embedded systems,in oder to minimize the increase in size and weight. In this study, we present a SPDTs-based tunable matching network capable …

    ets-quebec Download PDF for A reconfigurable impedance matching network (opens in a new tab)

  2. Design of a matching network for dipole antennas

    … matched. This thesis presents the design of a matching network for a 1-meter monopole antenna, operating over 30-90 MHz using the real frequency method (RFM). It outlines the mathematical steps needed to determine the equalizer function, which ultimately leads to the circuit design. The goal of …

    nps Repository record for Design of a matching network for dipole antennas (opens in a new tab)

  3. Tunable Impedance Matching Network Fundamental Limits and Pracitical Considerations

    … impedance mismatch. Recently, tunable impedance matching networks have begun to be implemented to address this problem. ^ This dissertation presents the first in-depth study on the frequency tuning range of tunable impedance matching networks. Both the fundamental limitations of ideal networks as …

    purdue-thes Repository record for Tunable Impedance Matching Network Fundamental Limits and Pracitical Considerations (opens in a new tab)

  4. An automated matching network incorporating a six-port reflectometer

    In this thesis an automated matching network is investigated as a means to reduce mismatch loss in circuits whose impedance characteristics vary during operation. The automated matching network incorporates a six-port network to measure impedance and a tunable circuit is implemented using varactor …

    ottawa-retro Repository record for An automated matching network incorporating a six-port reflectometer (opens in a new tab)

  5. Design of an Optimum Matching Network With an Improved Numerical Model

    The method introduced in this thesis is based on Carlin's method with some modifications and complements.

    sdstate Repository record for Design of an Optimum Matching Network With an Improved Numerical Model (opens in a new tab)

  6. High Linearity Full Duplex System Implemented with Novel Impedance Matching Network

    … cancellation purpose and a tunable impedance matching network to widen the operational frequency. This work is implemented with the TSMC 45nm CMOS technology. With the aid of a highly-linear impedance matching network, the IIP3 can reach +60dBm with a VSWR of 1.5:1. Additionally, the overall …

    washington Repository record for High Linearity Full Duplex System Implemented with Novel Impedance Matching Network (opens in a new tab)

  7. Novel Reconfigurable RF Amplifier Design Techniques

    … utilize tunable microelectromechancial matching networks to optimize their performance over varying operating conditions such as frequency, temperature, or function. Although this reconfigurability allows for greater functionality, novel design techniques must be developed to fully …

    hawaii Repository record for Novel Reconfigurable RF Amplifier Design Techniques (opens in a new tab)

  8. Adaptive Impedance Matching in the Lossy Medium

    This thesis proposes an adaptive impedance matching, which involves the integration of an implanted antenna, a tunable matching network and a power amplifier in the lossy medium for the medical implant communication service (MICS) band (402 MHz to 405 MHz), as the opted frequency band where human …

    qucosa-diss

  9. A Colpitts Oscillator Design Technique Using S-Parameters

    … three functional blocks: 1) an unstable active network (which includes the transistor, feedback capacitor, and input resistor); 2) an output matching network (which includes the inductor, tuning capacitor, and load); and, 3) an input matching network (which consists of the remaining tank …

    ucf Repository record for A Colpitts Oscillator Design Technique Using S-Parameters (opens in a new tab)

  10. A Novel, 2.4 and 5.8GHz Dual-band, 2-Stage RF-DC Charge-pump with Load-tuned Transmission Lines for DC Output Boost

    A dual-band, RF-DC charge pump without external matching network for wireless energy harvesting in 2.4 and 5.8 GHz bands is proposed. The first novelty here is in the use of optimal length transmission lines on the load side of the 4 half-wave rectifying stages that make up the 2-stage RFCP …

    calgary Repository record for A Novel, 2.4 and 5.8GHz Dual-band, 2-Stage RF-DC Charge-pump with Load-tuned Transmission Lines for DC Output Boost (opens in a new tab)

  11. A Dynamic Solution to Spatial Misalignment in Strongly Coupled Magnetic Resonance Wireless Power Transfer Systems

    … a directional coupler, a tuneable impedance matching network, a gain-phase detector, and a microcontroller. An algorithm was created to determine the varying load impedance; another modified the configuration of the tuneable matching network for one that can match to the new load impedance. …

    carleton Repository record for A Dynamic Solution to Spatial Misalignment in Strongly Coupled Magnetic Resonance Wireless Power Transfer Systems (opens in a new tab)

  12. Transformer-Based Tunable Matching Networks implemented in Silicon CMOS

    … such a transceiver is a reconfigurable/tunable matching network. In this thesis, two tunable matching networks, designed with the explicit goal of providing large impedance-tunability and low insertion loss, at a fixed resonant frequency have been proposed. The two tunable networks, namely …

    washington Repository record for Transformer-Based Tunable Matching Networks implemented in Silicon CMOS (opens in a new tab)

  13. Dual-band Power Amplifier for Wireless Communication Base Stations

    … approach for the synthesis of a novel dual-band matching network is proposed and applied for effective design of PA capable of maintaining high power efficiency at two arbitrary widely spaced frequencies. The proposed dual-band matching network incorporates two different stages. The first one …

    waterloo Repository record for Dual-band Power Amplifier for Wireless Communication Base Stations (opens in a new tab)

  14. Antennas and RF energy-harvesting devices for Office or Domestic environments

    … design of the antenna and creating of the matching network and rectifier. The novel technique of equivalent antenna-circuit was implemented in the simulation in the Agilent ADS software of microstrip-rectifiers and the matching network design to create a chip that carried the microstrips …

    kent Download PDF for Antennas and RF energy-harvesting devices for Office or Domestic environments (opens in a new tab)

  15. 300-1500 MHz Broadband LNA for the Canadian Hydrogen Observatory and Radio-transient Detector

    … loaded source degenerated amplifier with a matching network. This topology allows the designer to control the optimum source impedance for low noise independently from the input impedance, such that the two can be conjugates of each other. A matching network is then proposed to approximate …

    calgary Repository record for 300-1500 MHz Broadband LNA for the Canadian Hydrogen Observatory and Radio-transient Detector (opens in a new tab)

  16. Ultra-wideband nested coaxial waveguide feed antenna for radio astronomy

    … simulation. It was concluded that conventional matching and beam control techniques cannot be used for wideband applications. Aperture mismatch was solved by extending the use of an iris matching network from a 1.3:1 bandwidth to a 2:1 bandwidth. A new design method that combines electromagnetic …

    ubc Repository record for Ultra-wideband nested coaxial waveguide feed antenna for radio astronomy (opens in a new tab) Download PDF for Ultra-wideband nested coaxial waveguide feed antenna for radio astronomy (opens in a new tab)

  17. An efficient CMOS RF power extraction circuit for long-range passive RFID tags

    Effective matching and efficient power conversion play key roles in long- range power telemetry. This thesis discusses challenges and suggests solutions for long-range power telemetry with an emphasis on radio-frequency identification (RFID) applications. As a proof-of-concept a radio-frequency …

    ubc Repository record for An efficient CMOS RF power extraction circuit for long-range passive RFID tags (opens in a new tab) Download PDF for An efficient CMOS RF power extraction circuit for long-range passive RFID tags (opens in a new tab)

Page 1 of 11