Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 513 for “"material models"”.

  1. Neural Network Material Models Determined From Structural Tests

    Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1997.

    uiuc Repository record for Neural Network Material Models Determined From Structural Tests (opens in a new tab)

  2. Analysis of advanced material models for complex industrial processes

    … of associated and non-associated constitutive models and discusses their advantages and disadvantages. Additionally, new models are introduced to attempt to combine the advantages of both methods. To be able to evaluate a large number of models under similar conditions, all models tested have …

    ethz Repository record for Analysis of advanced material models for complex industrial processes (opens in a new tab)

  3. THE USE OF GENETIC PROGRAMMING TO GENERATE ENGINEERING MATERIAL MODELS

    Constitutive modeling of engineering materials is a prerequisite to making predictions about systems of which those materials are components. Often the analyst is faced with a new material or a traditional material in a state (strain, strain rate, temperature, etc.) for which there is no accepted …

    msu Repository record for THE USE OF GENETIC PROGRAMMING TO GENERATE ENGINEERING MATERIAL MODELS (opens in a new tab)

  4. Knowledge And Access: An Investigation Into Course Material Models At The Collegiate Level

    … physical textbooks have been the primary course material tool utilized to facilitate knowledge transfer from the instructor to the student population. In current times, multiple barriers to success have emerged for the modern student of higher education, including affordability, accessibility, …

    une-thes Repository record for Knowledge And Access: An Investigation Into Course Material Models At The Collegiate Level (opens in a new tab)

  5. Development of material models and acquisition of model parameters for metal cutting simulations

    … even though the software includes extensive work material libraries, many engineering materials are not included in them. When the material is not included in the library, the process of testing and characterizing the new material for the simulations is expensive, time consuming and requires a …

    aalto Repository record for Development of material models and acquisition of model parameters for metal cutting simulations (opens in a new tab)

  6. Material models and crash simulations in LS-DYNA: Development of virtual test laboratory

    … effective results, it is very important that the material model predicts the failure behaviour accurately in crash analysis. The main goal of the current study is to contribute to the development of a virtual material test laboratory where different materials can be tested in multiple stress …

    chalmers Repository record for Material models and crash simulations in LS-DYNA: Development of virtual test laboratory (opens in a new tab)

  7. Probabilistic Calibration of Unreinforced Masonry Wall Properties: From Constitutive Material Models to Structural Performance

    … Thus, developing appropriate constitutive models and calibration of material parameters in the constitutive models are important tasks for scientists in order to generate accurate model-based predictions. Determining material parameters of a constitutive model for a nonlinear inelastic …

    tamu Repository record for Probabilistic Calibration of Unreinforced Masonry Wall Properties: From Constitutive Material Models to Structural Performance (opens in a new tab)

  8. Deriving Generalized Temperature-Dependent Material Models for Masonry Through Fire Tests and Machine Learning

    … is one of the oldest and commonly used building materials in the construction industry. Among a variety of benefits, masonry provides low-cost construction, fire, and weather protection as well as thermal and sound insulation. In addition, masonry has superior material properties at elevated …

    clemson Repository record for Deriving Generalized Temperature-Dependent Material Models for Masonry Through Fire Tests and Machine Learning (opens in a new tab)

  9. DEVELOPMENT, PARAMETERIZATION AND VALIDATION OF DYNAMIC MATERIAL MODELS FOR SOIL AND TRANSPARENT ARMOR GLASS

    … rate constitutive models for the attendant materials (high explosive, air, soil, etc.); (b) the kinematic and structural response of the target to blast loading including the role of target design and use of blast attenuation materials; and (c) vulnerability of human …

    clemson Repository record for DEVELOPMENT, PARAMETERIZATION AND VALIDATION OF DYNAMIC MATERIAL MODELS FOR SOIL AND TRANSPARENT ARMOR GLASS (opens in a new tab)

  10. Subject-Specific Finite Element Predictions of Knee Cartilage Pressure and Investigation of Cartilage Material Models

    … and rehabilitation. Knee joint FE models have been used to predict in-vivo joint kinematics, loads, stresses and strains, and joint contact area and pressure. Abnormal cartilage contact pressure is considered a risk factor for incidence and progression of OA. For this study, three …

    calpoly Repository record for Subject-Specific Finite Element Predictions of Knee Cartilage Pressure and Investigation of Cartilage Material Models (opens in a new tab)

  11. Estimating In-Situ Flexural Strength of Heat-Affected Prestressed Concrete Beams Using Constituent Material Models

    … Based on these profiles, analytical constituent material models were generated using a cross-sectional fiber analysis program. The residual material properties of steel and concrete used were based on previous research. Moment-curvature relationships were generated for each heating duration. …

    clemson Repository record for Estimating In-Situ Flexural Strength of Heat-Affected Prestressed Concrete Beams Using Constituent Material Models (opens in a new tab)

  12. Elastoplastic Buckling of Functionally Graded Beams using Tamura-Tomota-Ozawa and Ramberg-Osgood Material Models

    Functionally Graded Materials (FGMs) are an advanced class of composite materials characterized by a gradual, continuous variation of material properties spatially. While buckling of slender Functionally Graded Beams (FGBs) can be analyzed using linear eigenvalue analysis and is well documented, …

    vt Repository record for Elastoplastic Buckling of Functionally Graded Beams using Tamura-Tomota-Ozawa and Ramberg-Osgood Material Models (opens in a new tab)

  13. Hierarchical material models with microstructure for nonlinear analysis of progressive damage in laminated composite structures

    … approaches using hierarchical 3D micromechanical models for the analysis of progressive damage in laminated structures. Each approach is generally a synthesis of three components: a nonlinear material model for the matrix behavior; a micromodel for the unidirectional lamina; and a sublaminate …

    uiuc Repository record for Hierarchical material models with microstructure for nonlinear analysis of progressive damage in laminated composite structures (opens in a new tab)

  14. Advancing AFM Nanometrology Through Experimental FSI Quantification, Novel Sensor Design, and Fractional ODE-based Material Models

    Nanometrology, which is the study of materials at the nanoscale, has been an important topic for the material science community at large. Atomic Force Microscopy (AFM) has become an indispensable tool to perform nanometrology. Especially, contact resonance (CR) AFM has been used to perform accurate …

    unr Repository record for Advancing AFM Nanometrology Through Experimental FSI Quantification, Novel Sensor Design, and Fractional ODE-based Material Models (opens in a new tab)

Page 1 of 26