Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"material replacement"”.

  1. Remanufacturing and Refurbishment of Truck Spare Parts A Mapping and Environmental Assessment of Circular Processes

    … of re-engineering processes. While this save materials, it is still important to evaluate the environmental impact from these activities. The purpose of this thesis was to map circular process steps and component flows within remanufacturing and refurbishment of three truck spare parts at …

    chalmers Repository record for Remanufacturing and Refurbishment of Truck Spare Parts A Mapping and Environmental Assessment of Circular Processes (opens in a new tab)

  2. Numerical and experimental study of mechanical properties for Laser Metal Deposition (LMD) process part

    … It creates parts by directly melting materials and depositing them on the workpiece layer by layer. In this process, the metal powder or fiber is melted within the melting pool by laser beam or electron beam and quickly solidifies to the deposited layer. LMD technology shows great …

    must-thes Repository record for Numerical and experimental study of mechanical properties for Laser Metal Deposition (LMD) process part (opens in a new tab)

  3. Field Measurements of Surface Displacements from Pipe Bursting

    … and subsurface conditions, host pipe size and material, replacement pipe size, and depth of cover. The pattern of displacements distributed in all three directions was consistent with the results from the controlled study. However, greater variability in results was found during the Ottawa …

    queens Repository record for Field Measurements of Surface Displacements from Pipe Bursting (opens in a new tab)

  4. Modifying Laser Written 3D Photonic Structures by Post-processing

    … change by coating with high refractive index material in Chapter 3, unit cell size scale down by thermal shrinkage in Chapter 4 and structure material replacement by backfilling in Chapter 5. I show that it is possible to control the detailed structure by post-processing in the future to …

    bristol Repository record for Modifying Laser Written 3D Photonic Structures by Post-processing (opens in a new tab) Download PDF for Modifying Laser Written 3D Photonic Structures by Post-processing (opens in a new tab)

  5. Analysis of cellulose ether hydrogels for medical device application

    … catheter tube. There are a lot of biobased material replacement options. Nevertheless, there are specific and high demands on a medical product that must be met. In turn, this puts specific and high demands on a possible biobased replacement. The aim of this study was to investigate biobased …

    chalmers Repository record for Analysis of cellulose ether hydrogels for medical device application (opens in a new tab)

  6. Sustainable Resource Use in Tenant Fit-Outs of Office Premises; Barriers, Trade-Offs and Organisational Conditions

    … in Kvarter Johanna in Gothenburg. The empirical material consists of semi-structured interviews with five respondents working within leasing, project management and sustainability. The interviews were complemented by document analysis and site visits to provide a broader understanding of the …

    chalmers Repository record for Sustainable Resource Use in Tenant Fit-Outs of Office Premises; Barriers, Trade-Offs and Organisational Conditions (opens in a new tab)

  7. The Image of the Vacant Chair: Soldier and Family Connections in the First World War

    … Letters became a symbolic representation, or material replacement, of the individual no longer in the home. Reforms such as Britain's passage of the Penny Post, and in America the revisions to legal domestic relations, such as marriage contracts and new moral codes provide examples of …

    clemson Repository record for The Image of the Vacant Chair: Soldier and Family Connections in the First World War (opens in a new tab)

  8. Engineering Quantum Nanomaterials for Solar Cell Applications

    Nanomaterials engineering for optoelectronic technologies has become a large, rapidly developing research topic in recent years, with applications in light emission, image sensing, displays, computing, communications, and renewable energy harvesting. Colloidal nanomaterials are particularly …

    jhu Repository record for Engineering Quantum Nanomaterials for Solar Cell Applications (opens in a new tab)

  9. Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases

    … may result in increased clinical adjustments, material replacement, and reduced prosthesis longevity. Purpose: The purpose of this in vitro study was to evaluate the effect of mechanical and chemical surface treatments on the tensile bond strength (TBS) and failure mode of an acrylic-based soft …

    tamu Repository record for Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases (opens in a new tab) Embargoed until 2028-05-01

  10. Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases

    … may result in increased clinical adjustments, material replacement, and reduced prosthesis longevity. Purpose: The purpose of this in vitro study was to evaluate the effect of mechanical and chemical surface treatments on the tensile bond strength (TBS) and failure mode of an acrylic-based soft …

    tamu Repository record for Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases (opens in a new tab) Embargoed until 2028-05-01

  11. Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases

    … may result in increased clinical adjustments, material replacement, and reduced prosthesis longevity. Purpose: The purpose of this in vitro study was to evaluate the effect of mechanical and chemical surface treatments on the tensile bond strength (TBS) and failure mode of an acrylic-based soft …

    tamu Repository record for Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases (opens in a new tab) Embargoed until 2028-05-01

  12. Interaction of plasmas with lithium and tungsten fusion plasma facing components

    … all concerns which inform choices of divertor material. Of the many materials proposed for use in the divertor, only a few remain as promising choices. Tungsten has been chosen as the material for the ITER divertor, and liquid lithium stands poised as its replacement in higher heat flux …

    uiuc Repository record for Interaction of plasmas with lithium and tungsten fusion plasma facing components (opens in a new tab)

  13. Synergetics of Nuclear Breeding Systems

    … of nuclear energy systems while produce fissile materials has become an important and essential part of scenarios for the future development of nuclear energy. Definitive analyses and nucleonic comparisons of these breeder systems have been impeded by the lack of a rigorous and consistent …

    mcmaster Repository record for Synergetics of Nuclear Breeding Systems (opens in a new tab)

  14. Cold, green and clean: reduction of parasitic losses in zero emission cryogenic expanders

    … losses through a three pronged approach: new materials, new lubricants and new designs. The Dearman Engine has a low power output compared to an internal combustion engine (ICE) and as such parasitic losses have the potential to absorb a significant amount of the power generated. The cylinder …

    birmingham Download PDF for Cold, green and clean: reduction of parasitic losses in zero emission cryogenic expanders (opens in a new tab)

  15. NON-LINEAR FINITE ELEMENT ANALYSIS AND OPTIMIZATION FOR LIGHT WEIGHT DESIGN OF AN AUTOMOTIVE SEAT BACKREST

    … element analysis including an elastic-plastic material model and geometric nonlinearity (large displacements) of the reference seat and the final optimized seat backrest frame is performed using the ABAQUS/Standard finite-element package. Results from the nonlinear analysis provide an accurate …

    clemson Repository record for NON-LINEAR FINITE ELEMENT ANALYSIS AND OPTIMIZATION FOR LIGHT WEIGHT DESIGN OF AN AUTOMOTIVE SEAT BACKREST (opens in a new tab)

  16. Náhrada materiálu podlahového závěsu kuchyňky dopravního letounu

    Práce se zabývá změnou materiálu podlahového závěsu v letounu. Jsou popsány různé materiály vhodné pro strukturální součást, přenos zatížení a kritéria jejich volby. Jsou uvedeny metody výroby vhodné pro zvolený díl. Závěs je analyzován metodou konečných prvků v softwaru ANSYS Workbench 2024 R2. …

    brno-tech Repository record for Náhrada materiálu podlahového závěsu kuchyňky dopravního letounu (opens in a new tab)

  17. Investigation Of Medium And High Strength Aluminum Alloy Via Direct Laser Metal Deposition

    … strength-to-weight ratio, offers lightweight material replacement in many applications such as automotive, aerospace, and many other industrial applications. In the automotive industry, the demand for Al alloys has increased since the introduction of electric vehicles and the need for more …

    wayne-thes Repository record for Investigation Of Medium And High Strength Aluminum Alloy Via Direct Laser Metal Deposition (opens in a new tab)

  18. A Synergistic Approach to Radiation Shielding Design Through Computation-Informed Selection of Additively Manufacturable Composite Materials and Shield Configurations

    … manufacturable composite radiation shielding materials. Monte Carlo simulations explore the shielding design space and inform optimization algorithms. The materials selected for these simulations are additively manufacturable via fused deposition modeling (FDM) into homogeneous and layered …

    arizona-thes Repository record for A Synergistic Approach to Radiation Shielding Design Through Computation-Informed Selection of Additively Manufacturable Composite Materials and Shield Configurations (opens in a new tab)