Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 44 for “"maximum dry density"”.

  1. Effects Of The Soil Properties On The Maximum Dry Density Obtained Fro

    … a laboratory compaction test to determine the maximum dry density of compacted soils, which can be used for specifications of field compaction. The Compaction of soils is influenced by many factors, the most common are the moisture content, the soil type and the applied compaction energy. The …

    ucf Repository record for Effects Of The Soil Properties On The Maximum Dry Density Obtained Fro (opens in a new tab)

  2. Saturation effects on the resilient response of fine-grained soil

    … techniques at optimum moisture content and maximum dry density. In addition, some of the samples were later subjected to post-compaction saturation. The decrease in resilient modulus with increasing saturation was shown to follow a somewhat linear relationship. Methods to predict reductions …

    ut-knoxville Repository record for Saturation effects on the resilient response of fine-grained soil (opens in a new tab)

  3. Verification testing and alternative test methods for the resilient modulus of fine grained soils

    … were compacted at optimum water content and maximum dry density (standard energy), and laboratory measurements of the resilient modulus were performed using the cyclic triaxial method, and an alternative test method (Li 1992). Model parameters were found for two different analytical models. …

    ut-knoxville Repository record for Verification testing and alternative test methods for the resilient modulus of fine grained soils (opens in a new tab)

  4. Avaliação da aplicabilidade de cinzas de fundo de resíduos de serviço de saúde para uso em cobertura final de aterros sanitários

    … content, ranging between 8.3% and 11.9%, and maximum dry density, varying from 1.8 to 2.1 g/cm³. In contrast, the ash curve displayed an optimum moisture content of 37.2% and maximum dry density of 1.01 g/cm³. Importantly, all mixtures exhibited a saturated permeability coefficient in the …

    brazil-ufrn Repository record for Avaliação da aplicabilidade de cinzas de fundo de resíduos de serviço de saúde para uso em cobertura final de aterros sanitários (opens in a new tab)

  5. Strength and Erodability of South Carolina Soils for Embankment Construction

    … All of the specimens were remolded to 95% of the maximum dry density with moisture content between -1% to +2% of the optimum moisture content. Based on the results, soils from D2-Anderson-01, B-1 (MH), D2-Abbeville-01, B-1 (SM), D4-York-04, B-2 (SM), D2- Abbeville-01, B-3 (SM), D1-Richland-08, B-2 …

    south-carolina Repository record for Strength and Erodability of South Carolina Soils for Embankment Construction (opens in a new tab)

  6. Sorption characteristics and their effects on geotechnical properties of illite

    … an increase in optimum moisture content and maximum dry density as the concentration of liquid organic contaminants increases.</p>

    njit Repository record for Sorption characteristics and their effects on geotechnical properties of illite (opens in a new tab)

  7. Material characterization in support of implementation of the mechanistic-empirical pavement design guide

    … of both materials were studied at different density levels. The results of the study showed that the Mr of FA mixtures is in general between 2.5 and 5 times (corresponding to lowest and highest levels of bulk stress respectively) higher than the Mr of virgin aggregates (Type B) at 98% and …

    hawaii Repository record for Material characterization in support of implementation of the mechanistic-empirical pavement design guide (opens in a new tab)

  8. Characterization of Granular Materials and Compaction Methods and Application in Design of Transportation Infrastructure

    … improve the precision of this test. Furthermore, maximum dry density and optimum moisture content are determined from each compaction technique. Statistical analyses are also performed on the experimental results to compare maximum dry density, optimum moisture content, and compressive strength in …

    tamu Repository record for Characterization of Granular Materials and Compaction Methods and Application in Design of Transportation Infrastructure (opens in a new tab)

  9. Compaction of Soil by Repeated Loading

    … compacted up to a minimum of 95% of the Proctor maximum dry density, as determined from laboratory test results (AASHTO T99). This requirement is usually specified as a norm in any contract document involving field compaction. Soils can be compacted by repeated, systematic application of high …

    concordia Download PDF for Compaction of Soil by Repeated Loading (opens in a new tab)

  10. Determination of soil properties for sandy soils and road base at Riverside Campus using laboratory testing and numerical simulation

    … analysis, hydrometer test, specific gravity, maximum dry density, Atterberg limit, stiffness, direct shear test, triaxial test, and a simple procedure to estimate the maximum and minimum void ratio of the clean sand. Relation between strength/deformation, vertical displacement/shear …

    tamu Repository record for Determination of soil properties for sandy soils and road base at Riverside Campus using laboratory testing and numerical simulation (opens in a new tab)

  11. Evaluation of engineering properties of drill cuttings for construction materials

    … indicate an optimum water content of 19% and maximum dry density of 100 pcf when compacted with comparable energy for embankment fills, TxDOT 114 or Standard Proctor compaction. The unconfined compression strength when the material is compacted to its maximum dry density with Standard Proctor …

    texas Repository record for Evaluation of engineering properties of drill cuttings for construction materials (opens in a new tab)

  12. Designing Cold Mix Asphalt (CMA) and Cold-In-Place Recycling (CIR) using SUPERPAVE Gyratory Compactor

    … the total fluid content required to achieve maximum dry density of the CMA, but it did not help to obtain the required amounts of water and emulsion separately. The mix design method using the Superpave gyratory compactor was successful in identifying both optimum emulsion content and water …

    unr Repository record for Designing Cold Mix Asphalt (CMA) and Cold-In-Place Recycling (CIR) using SUPERPAVE Gyratory Compactor (opens in a new tab)

  13. Evaluation Of Biosorption Activated Media Under Roadside Swales For Stormwater Quality Improvement And Harvesting

    … specific gravity, permeability, infiltration, maximum dry density, moisture content of maximum dry density, and particle-size distribution. One of the goals of this experiment is to compare the nitrogen and phosphorous species concentrations in the effluent of BAM to sandy soil for simulated …

    ucf Repository record for Evaluation Of Biosorption Activated Media Under Roadside Swales For Stormwater Quality Improvement And Harvesting (opens in a new tab)

  14. Dulkio kiekio įtaka vidinės trinties kampo vertėms smėliuose /

    … 1. Loose state (ID = 0), oven dried soils. 2. Maximum dry density (ID = 1), optimum moisture content (wopt) soils. Based on the tests and data analysis, it was found that soils under the first condition showed a tendency for the internal friction angle values to increase with a higher silt …

    vilnius Repository record for Dulkio kiekio įtaka vidinės trinties kampo vertėms smėliuose / (opens in a new tab)

  15. Estimation of modified proctor densities based on visual identification

    … appropriate relationships between grain sizes, maximum dry densities and optimum moisture content were developed. From these, two tables were derived to estimate the maximum dry density and optimum moisture content based on grain size distribution.</p><p>In a fill control job, if the borrow pit …

    njit Repository record for Estimation of modified proctor densities based on visual identification (opens in a new tab)

  16. Determination of non-nuclear alternative to the nuclear density gauge through laboratory and field testing

    … of Transportation (NJDOT) utilizes the nuclear density gauge (NDG) for evaluating compaction quality based on minimum density requirements, typically 95% of the Proctor maximum dry density (MDD). However, there are concerns with using the NDG. The goal of this study was to replace the NDG with …

    rowan Repository record for Determination of non-nuclear alternative to the nuclear density gauge through laboratory and field testing (opens in a new tab)

  17. Transport properties and freeze-thaw resistance of roller compacted concrete (RCC) for pavement applications

    … method. Tests such as Ve-be time, moisture-density profiles, compressive strength, water absorption, permeable voids content, sorptivity and desorptivity and rapid Freeze-Thaw (F-T) resistance were performed. Scanning electron microscope (SEM) images and air void analyses of these mixes was …

    iastate Repository record for Transport properties and freeze-thaw resistance of roller compacted concrete (RCC) for pavement applications (opens in a new tab)

  18. Investigating Use of Aggregate Density to Develop Design Aggregate Structure for Asphalt Concrete Mixtures

    … potential causes for the failures, aggregate density within the mix when designed at 80 gyrations was of specific concern to this thesis and was compared to the maximum dry density of the aggregate as measured using ASTM D4253-00. The objective of this research was to determine if the …

    wvu Repository record for Investigating Use of Aggregate Density to Develop Design Aggregate Structure for Asphalt Concrete Mixtures (opens in a new tab)

  19. Fatigue and rutting analyses of a pavement structure with expansive soil-rubber (ESR) base stabilized with off-specification fly ash

    … equal to 95% (±0.5%) of the Standard Proctor maximum dry density. Expansive soil and ESR specimens were subjected to resilient modulus and Poisson's ratio testing immediately after compaction. ESR-FA specimens were allowed to cure for 14 days before being subjected to resilient modulus and …

    colostate Repository record for Fatigue and rutting analyses of a pavement structure with expansive soil-rubber (ESR) base stabilized with off-specification fly ash (opens in a new tab)

  20. Impact of Biopolymer Type and Concentration on Stabilization of Recycled Subgrade Soil

    … treatment/stabilization were evaluated using the maximum dry density (MDD) and unconfined compressive strength (UCS) tests after seven days of dry curing and after wet-dry cycle curing. Compared to the untreated specimen strength of 3 MPa, SLS1 and SLS2 treatments at 1% dosage improved UCS by 33% …

    tamu Repository record for Impact of Biopolymer Type and Concentration on Stabilization of Recycled Subgrade Soil (opens in a new tab)

Page 1 of 3