Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"maximum power point tracker"”.

  1. Maximum power point tracker for solar arrays using controlled rectifier.

    … by solar cells. There exists an operating point associated with solar cells at which the power generated is maximized at any given point in time. A maximum power point tracker (MPPT) is required to track this maximum power operating point (MPOP). A wide range of systems exists to meet this …

    louisville Repository record for Maximum power point tracker for solar arrays using controlled rectifier. (opens in a new tab)

  2. Modelling of Generic Maximum Power Point Tracker for Wind Farms

    … effect. This is one of the reasons why wind power, as a renewable energy source, is increasing fast in the world today. An effective way of harnessing lots of wind power is to build large wind farms. However, the aero-dynamic interaction among wind turbines, called wake effect, makes control …

    chalmers Repository record for Modelling of Generic Maximum Power Point Tracker for Wind Farms (opens in a new tab)

  3. MESH : a maximum power point tracker for a wireless sensor network

    … is becoming increasingly important in low-power applications where energy from the environment is used to power the system alone, or to supplement a battery. For example, pulse oximeter sensors inside helmets of road racing cyclists are powered by the sun. These sensors have become smaller …

    texas Repository record for MESH : a maximum power point tracker for a wireless sensor network (opens in a new tab)

  4. Photovoltaic maximum power point tracker with zero oscillation and adaptive step

    Maximum Power Point Tracking (MPPT) strategies in Photovoltaic (PV) systems ensure efficient utilization of PV arrays. Among different strategies, the Perturb and Observe (P&O) algorithm has gained wide popularity due to its intuitive nature and simple implementation. However, such simplicity in …

    ubc Repository record for Photovoltaic maximum power point tracker with zero oscillation and adaptive step (opens in a new tab) Download PDF for Photovoltaic maximum power point tracker with zero oscillation and adaptive step (opens in a new tab)

  5. Design of a maximum power point tracker with simulation, analysis, and comparison of algorithms

    In this thesis, the advantages of three different maximum power point tracking (MPPT) algorithm are investigated. By simulation, the performance and efficiency of these algorithms was analyzed. By using MATLAB's SimPowerSystems block set, we created the model comprised of a Kyocera KD135GX-LP solar …

    nps Repository record for Design of a maximum power point tracker with simulation, analysis, and comparison of algorithms (opens in a new tab)

  6. Simulink® Based Design and Implementation of a Solar Power Based Mobile Charger

    … one.Individually a mobile phone consumes little power but collectively this becomes very large. This consideration motivated the research undertaken in this masters thesis. The objective of this thesis is to design a model for solar power based charging circuits for mobile phone using …

    unt Repository record for Simulink® Based Design and Implementation of a Solar Power Based Mobile Charger (opens in a new tab)

  7. Design and control of photovoltaic systems in distributed generation

    … is designed to improve the photovoltaic output power by using a new maximum power point tracking method. The proposed algorithm improves the hill climbing search method by fuzzifying the rules, thereby eliminating some of the disadvantages associated with the method. Modification of the proposed …

    strathclyde Repository record for Design and control of photovoltaic systems in distributed generation (opens in a new tab)

  8. Modeling and Analysis of a Photovoltaic System with a Distributed Energy Storage System

    … installations. PV arrays are a unique source of power generation in that they are affected by the location of the sun, shading, and temperature changes. These characteristics make solar one of the most highly variable forms of renewable energy. In order to improve solar power’s consistency, PV …

    calpoly Repository record for Modeling and Analysis of a Photovoltaic System with a Distributed Energy Storage System (opens in a new tab)

  9. Application of Copper Indium Gallium Diselenide photovoltaic cells to extend the endurance and capabilities of the Raven RQ-11B Unmanned Aerial Vehicle

    … Raven RQ-11B SUAV, provide sufficient electrical power to fully operate the UAV for extended periods of time. This research focuses on extending the flight time of the Raven RQ-11B and on minimizing its sole dependence on lithium-ion batteries. This research will also demonstrate that increasing …

    nps Repository record for Application of Copper Indium Gallium Diselenide photovoltaic cells to extend the endurance and capabilities of the Raven RQ-11B Unmanned Aerial Vehicle (opens in a new tab)

  10. Integrated system of solar simulator, photovoltaic panel, and single sensor load voltage maximum power point tracking (MPPT)

    … It consists of 100-W PV panel, dc-dc converter, maximum power-point tracker, and an artificial light source from four 400-W metal halide light bulbs. The primary function of the apparatus is to simulate a wide range of solar irradiance profiles. Its accuracy is determined by the relative …

    texas Repository record for Integrated system of solar simulator, photovoltaic panel, and single sensor load voltage maximum power point tracking (MPPT) (opens in a new tab)

  11. Modeling and Testing Powerplant Subsystems of a Solar UAS

    … the preliminary and detailed design of solar powered Unmanned Aerial Systems (UAS), it is necessary to have a thorough understanding of the systems involved. In particular, it is desirable to have mathematical models and analysis tools describing the energy income and expenditure of the …

    calpoly Repository record for Modeling and Testing Powerplant Subsystems of a Solar UAS (opens in a new tab)

  12. Utilizing maximum power point trackers in parallel to maximize the power output of a solar (photovoltaic) array

    … optimizing a photovoltaic (PV) system to use a maximum power point tracker (MPPT) to increase the power output of the solar array. Currently, most military applications that utilize solar energy omit or use only a single MPPT per PV system. The focus of this research was to quantify the expected …

    nps Repository record for Utilizing maximum power point trackers in parallel to maximize the power output of a solar (photovoltaic) array (opens in a new tab)

  13. A power conversion, data collection and instrumentation system for solar powered vehicles

    This thesis covers three aspects of a power electronic system designed for solar powered vehicles. The power conversion, data collection, and instrumentation systems perform the task of power regulation and distribution, and manage measurement information pertaining to the conversion process. In …

    iastate Repository record for A power conversion, data collection and instrumentation system for solar powered vehicles (opens in a new tab)

  14. Optimized granularity analysis of maximum power point trackers in low power applications

    … consumption through the growing use of low-power electric devices in the U.S. military makes augmentation with solar energy an attractive solution due to its versatility, sustainability, and relatively low cost. In variable environmental conditions, solar panels generate unpredictable …

    nps Repository record for Optimized granularity analysis of maximum power point trackers in low power applications (opens in a new tab)

  15. Modelling and design of grid connected doubly fed induction generator

    … the torque, the dc bus voltage and the reactive power exchange with the grid. The grid connected DFIG is simulated and with the controller blocks for the rotor side converter and grid side converter control. The vector control of the DFIG is performed by applying stator flux orientation control …

    ttu Repository record for Modelling and design of grid connected doubly fed induction generator (opens in a new tab)

  16. Inverter design and analysis using multiple reference frame theory

    … By modeling an inverter connected to a boost maximum power point tracker (MPPT) in this manner, frequency transfer properties can be preserved and harmonics throughout the system can be predicted. A state space model taking into account the dc and fundamental grid frequency is presented and …

    must-thes Repository record for Inverter design and analysis using multiple reference frame theory (opens in a new tab)

  17. Extremum Seeking Maximum Power Point Tracking for a Stand-Alone and a Grid-Connected Photovoltaic Systems

    … technical methods are required to ensure the maximum available power is harnessed from the photovoltaic (PV) system. This dissertation proposed a new discrete-in-time extremum-seeking (ES) based technique for tracking the maximum power point of a photovoltaic array. The proposed method is a …

    ku Repository record for Extremum Seeking Maximum Power Point Tracking for a Stand-Alone and a Grid-Connected Photovoltaic Systems (opens in a new tab)

  18. On the Design and Operation of Heat Pump Systems for Zero Carbon Districts

    … pumps (HP), photovoltaic panels (PV), inverter, maximum power point tracker, domestic hot water tank, energy metering, and simplified battery and thermal storage systems. The integrated framework covers demand profiles, energy system sizing, components' interaction, and performance analysis. An …

    concordia Download PDF for On the Design and Operation of Heat Pump Systems for Zero Carbon Districts (opens in a new tab)

  19. Rastreamento da máxima potência utilizando o método baseado na medição de temperatura com modulação OCC digital

    … system that makes the panel operate at the maximum power point. These tracking systems are the so-called Maximum Power Point Tracker – MPPT. The main objective of this work is to build a photovoltaic system controlled by a DSP TMS320F28335 and switched converter boost type, so that the …

    brazil-ufrn Repository record for Rastreamento da máxima potência utilizando o método baseado na medição de temperatura com modulação OCC digital (opens in a new tab)

  20. Solar Hot Water Heater Augmented with PV-TEM Heat Pump

    … reduce the photovoltaic array size. The use of a maximum power point tracker into the PV/TEM system should be investigated as panel efficiency losses reached up to 30% in the configuration studied. The possibility of incorporating combined PV/T modules could decrease costs and also warrants …

    queens Repository record for Solar Hot Water Heater Augmented with PV-TEM Heat Pump (opens in a new tab)

Page 1 of 2