Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1642 for “"measurement techniques"”.

  1. High-voltage measurement techniques

    The Department of Electrical Engineering at the University of British Columbia acquired a high-voltage test set in 1979 for teaching and research purposes. To make this test set useful for experiments which undergraduate students can do themselves, various additions and modifications had to be …

    ubc Repository record for High-voltage measurement techniques (opens in a new tab) Download PDF for High-voltage measurement techniques (opens in a new tab)

  2. Remote attitude measurement techniques

    … the same set of two physical vectors. These measurements are reported in terms of probabilistic vectors and used to compute a probabilistic matrix which defines the attitude of the remote sensor. This probabilistic matrix can then be used to transform any vector measured by one sensor into …

    njit Repository record for Remote attitude measurement techniques (opens in a new tab)

  3. Shutter speed measurement techniques

    Thesis (M.A.)--Boston University, 1949. This item was digitized by the Internet Archive.

    bu Repository record for Shutter speed measurement techniques (opens in a new tab)

  4. Rotating Vane Flow Measurement Techniques

    … performance of vane flowmeter methods for the measurement of air and gas flow. To improve on existing rotating vane anemometer performance, a capacitance change vane sensing technique is investigated. In conjunction with Ower's dynamic equations steady state and step response measurements for a …

    southwales Repository record for Rotating Vane Flow Measurement Techniques (opens in a new tab) Download PDF for Rotating Vane Flow Measurement Techniques (opens in a new tab)

  5. Measurement techniques for quantum microwaves

    … sensors. The development of novel detectors and measurement techniques is important for advancing quantum technologies by enabling detection schemes that are faster, more accurate, or less complex than the current state of the art. In this thesis, we improve upon the existing measurement …

    aalto Repository record for Measurement techniques for quantum microwaves (opens in a new tab)

  6. Measurement techniques for microbial corrosion assessment

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for Measurement techniques for microbial corrosion assessment (opens in a new tab)

  7. Simplified real-time PAH measurement techniques

    … emissions has been hampered because existing PAH measurement techniques are slow, complex, and expensive. This study investigates two simple, inexpensive, real-time PAH measurement techniques which might be suitable for testing stoves. The first uses a device, called the "moving tape sampler" …

    vt Repository record for Simplified real-time PAH measurement techniques (opens in a new tab)

  8. ESD circuit design and measurement techniques

    Part 1 of this thesis presents a method to measure sub-nanosecond reverse recovery in wafer-level test structures. The setup uses a transmission line pulse generator with a time domain through connection to measure the device under test current. The setup is then used to measure reverse recovery in …

    uiuc Repository record for ESD circuit design and measurement techniques (opens in a new tab)

  9. Comparison of thermal diffusivity measurement techniques

    Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2004

    msu Repository record for Comparison of thermal diffusivity measurement techniques (opens in a new tab)

  10. Velocity Measurement Techniques of Non-TEM Waves

    … is to perform and compare time domain velocity measurement techniques using pulse modulated microwaves in waveguide. Open air velocity measurements were also performed to provide a basis of calibration. The experimental results derived from the experiments were analyzed to give further insight …

    marquette Repository record for Velocity Measurement Techniques of Non-TEM Waves (opens in a new tab)

  11. Impedance measurement techniques for DC-biased systems

    … information about six methods for impedance measurement of DC biased systems. It describes a physical interface for low-voltage Devices Under Test (DUTs) using the shunt-through method with DC-blocking capacitors. The interface is used to measure impedance versus frequency of three pouch …

    chalmers Repository record for Impedance measurement techniques for DC-biased systems (opens in a new tab)

  12. A comparison of impedance measurement techniques in air.

    … resonators were measured using two different techniques. The first technique employed the conventional Standing Wave Tube method. The second was the Dual-Microphone Transfer Function method of J.Y. Chung and D. A. Blaser . The calculability of the frequency dependent Helmholtz resonator …

    nps Repository record for A comparison of impedance measurement techniques in air. (opens in a new tab)

  13. Comparison of body fat measurement techniques in females

    <p>The main objective of this study was to assess the accuracy of the Tanita-TBF 305 foot-to-foot bioelectrical impedance analyzer for the estimation of body composition as compared to hydrostatic weighing. The secondary objective of this investigation was to access the impact of waist-to-hip ratio …

    ut-knoxville Repository record for Comparison of body fat measurement techniques in females (opens in a new tab)

  14. A comparison of measurement techniques for acoustic cavitation

    … scenarios. The spatial correlation between the measurements is shown.</p> <p>An electrochemical sensor based on surface erosion/corrosion of a passive metallic solution/metal interface is developed and shown to be applicable to a number of environments. Counting of discrete surface …

    soton Download PDF for A comparison of measurement techniques for acoustic cavitation (opens in a new tab)

  15. Force measurement techniques in short duration hypersonic facilities

    <p>In this thesis, the free-flight force measurement technique is commissioned, validated and implemented with increasing complexity in geometries within the University of Oxford High Density Tunnel, a short-duration, heated Ludwieg Tube. The motivation of the work was to improve the current …

    oxford Repository record for Force measurement techniques in short duration hypersonic facilities (opens in a new tab)

  16. Measurement techniques used to determine atmospheric structure parameter

    … different atmospheric structure constant (Cn2) measurement techniques using data collected in a field test. Cn2 is a value used to convey the strength of optical turbulence in units of m^-2/3. Cn2 data was collected using the following equipment: Integrated Atmospheric Characterization System …

    gatech Repository record for Measurement techniques used to determine atmospheric structure parameter (opens in a new tab)

  17. Spatial phase measurement techniques in modified grating interferometry

    … the work details the analysis of different phase measurement techniques, focusing on the error sources inherent in each approach. New, error-reducing algorithms are presented and the influence of the intensity sample weighting (window function) on phase errors is described. A spatial, phase …

    arizona-thes Repository record for Spatial phase measurement techniques in modified grating interferometry (opens in a new tab)

Page 1 of 83