Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 205 for “"mechanical assembly"”.

  1. Optimization of robotic mechanical assembly sequence utilizing probabilistic constraints.

    Assembly sequence is a determining factor in the successful design of an assembly system. An optimum sequence can improve the product quality, increase reliability of assembly and reduce assembly costs. This dissertation presents a general method for evaluation of optimum mechanical assembly …

    wvu Repository record for Optimization of robotic mechanical assembly sequence utilizing probabilistic constraints. (opens in a new tab)

  2. An object-oriented approach to generate mechanical assembly sequences

    A mechanical assembly is a composition of parts interconnected to form a stable unit. The mechanical assembly sequence problem is to find a feasible, cost-effective sequence of tasks to perform the assembly. This problem has recently been recognised as significant by the manufacturing industries, …

    manitoba Repository record for An object-oriented approach to generate mechanical assembly sequences (opens in a new tab)

  3. ENGINEERING 3D NANOINTERFACES VIA MECHANICAL ASSEMBLY AND TOP-DOWN FABRICATION FOR ENERGY, DIAGNOSTIC AND CELLULAR APPLICATIONS

    The emergence of wearable technology and implantable electronics has showcased new possibilities for personalized health monitoring. To achieve accurate measurements, it is critical to integrate health sensors on stretchable and flexible substrates that can form conformal contacts on any …

    jhu Repository record for ENGINEERING 3D NANOINTERFACES VIA MECHANICAL ASSEMBLY AND TOP-DOWN FABRICATION FOR ENERGY, DIAGNOSTIC AND CELLULAR APPLICATIONS (opens in a new tab) Embargoed until 2027-05-01

  4. A framework for advanced Information Communication Technologies integration within Higher Education Engineering Graphics and Design to improve spatial visualization

    … to enhance students' understanding of sectioned mechanical assembly drawings while improving spatial visualization. Furthermore, students' self-directed learning skills were determined and advanced information communication technologies were implemented to improve students' self-directed learning …

    nwu-za Repository record for A framework for advanced Information Communication Technologies integration within Higher Education Engineering Graphics and Design to improve spatial visualization (opens in a new tab)

  5. Design for manufacturability : re-design of pencil sharpener for the ease of assembly

    … the parts of pencil sharpener for the ease of assembly. The procedure for the selection of a suitable and economical assembly method is based on the Boothroyd and Dewhurst methods. Analysis of the initial design for manual assembly and re-design for automatic as well as manual assembly is …

    njit Repository record for Design for manufacturability : re-design of pencil sharpener for the ease of assembly (opens in a new tab)

  6. Design for assembly : re-design of an electrical switch for the ease of automatic assembly

    A design for assembly (DFA) method is used to analyze the existing design of parts of an electrical switch, and to reduce and re-design them, for the ease of automatic assembly. The procedure for the selection of suitable and economical assembly method is presented based on the Boothroyd & Dewhurst …

    njit Repository record for Design for assembly : re-design of an electrical switch for the ease of automatic assembly (opens in a new tab)

  7. Processing, Structure, and Tribological Property Interrelationships in Sputtered Nanocrystalline ZnO Coatings

    … good candidates in providing lubricity in moving mechanical assembly applications, such as orthopedics and bearing steels. Nanocrystalline ZnO coatings with a layered wurtzite crystal structure have the potential to function as a lubricious material by its defective structure which is controlled …

    unt Repository record for Processing, Structure, and Tribological Property Interrelationships in Sputtered Nanocrystalline ZnO Coatings (opens in a new tab)

  8. The modification of fusion welding techniques for successful joining of silicon carbide-reinforced aluminum alloy composites

    … (GTAW) and laser beam welding (LBW) processes, a mechanical assembly was designed, constructed, and modified for use during GTAW. Testing of the assembly involved GTA welding in the butt and spot modes with respect to various specimen geometries and welding parameters. It was concluded that the …

    ut-knoxville Repository record for The modification of fusion welding techniques for successful joining of silicon carbide-reinforced aluminum alloy composites (opens in a new tab)

  9. AN INTEGRATED AUGMENTED REALITY METHOD TO ASSEMBLY SIMULATION AND GUIDANCE

    … thesis focuses on two popular research topics in mechanical assembly, i.e., assembly motion simulation (AMS) and assembly operation guidance (AOG). An augmented reality (AR)-based AMS system (ARAMS) is proposed to incorporate the real-virtual interaction, so that users can obtain more immersive …

    nus Repository record for AN INTEGRATED AUGMENTED REALITY METHOD TO ASSEMBLY SIMULATION AND GUIDANCE (opens in a new tab) Download file for AN INTEGRATED AUGMENTED REALITY METHOD TO ASSEMBLY SIMULATION AND GUIDANCE (opens in a new tab)

  10. Self-Alignment of Silicon Microparts on a Hexadecane-Water Interface by Surface Tension

    Mechanical assembly of systems and structures on the micro-scale can be inefficient as particles of sub-millimeter dimensions are difficult to manipulate. Cutting edge manufacturing methods implement self-assembly as an approach to ordering micro and nano-sized parts into a desired arrangement. …

    usf Repository record for Self-Alignment of Silicon Microparts on a Hexadecane-Water Interface by Surface Tension (opens in a new tab)

  11. Systematic approach to assembly system design Designing an assembly system in a low volume, rapid growth scenario

    … has been adapted and applied in designing the mechanical assembly subsystem. Requirements on the assembly system were found to focus on handling uncertainty and gradual changes in product mix and production volumes. Analysis of current product and assembly system characteristics revealed a …

    chalmers Repository record for Systematic approach to assembly system design Designing an assembly system in a low volume, rapid growth scenario (opens in a new tab)

  12. Hierarchical task decomposition and execution for robot manipulation task using a wrist force sensor

    … methodology has been developed that enables a mechanical assembly task to be subdivided into a series of executable subtasks. By applying this methodology to the assembly of a hydraulic gear pump, a library of special purpose, task oriented, subtask programs were created. Most of these …

    ubc Repository record for Hierarchical task decomposition and execution for robot manipulation task using a wrist force sensor (opens in a new tab) Download PDF for Hierarchical task decomposition and execution for robot manipulation task using a wrist force sensor (opens in a new tab)

  13. Strong light-matter coupling and room temperature exciton polaritons in atomically-thin WS2 crystals

    … causing damage to the monolayer is overcome by mechanical assembly. We show that WS2 polaritons in such a microcavity can propagate ballistically over tens of micrometres in the thermal regime, before the onset of condensation, and possess enhanced macroscopic coherence due to strong motional …

    anu Repository record for Strong light-matter coupling and room temperature exciton polaritons in atomically-thin WS2 crystals (opens in a new tab)

  14. Disassembly in Architecture: Devising a Lifecycle System for the Building Envelope

    … systems. They are studied with a 'Design-for-Disassembly' (DfD) approach to consider assembly and disassembly of components. The aim is to generate design approaches and strategies for curtain wall systems predicated on the 'cradle-to-cradle' concept leading to complete and selective disassembly. …

    buffalo Repository record for Disassembly in Architecture: Devising a Lifecycle System for the Building Envelope (opens in a new tab)

  15. Patient Tracking Intravenous Pole: Design and Evaluation

    … The scope of this research does not include the mechanical design of the robot. Hence an Ohmni telepresence robot is adopted to test the code. Future modifications and features are also briefly considered. The autonomy of the IV pole is achieved by combining a camera for vision, a LIDAR for …

    ttu Repository record for Patient Tracking Intravenous Pole: Design and Evaluation (opens in a new tab)

  16. Design of a Dual Polarized Slot Antenna in MLW Technology

    … a gap between the different layers of the mechanical assembly. Moreover, the new MLW technology allows for an even smaller form factor and al lows for smaller structures in its layers, which opens op design space. Therefore, this project aims to create a dual polarized antenna element in …

    chalmers Repository record for Design of a Dual Polarized Slot Antenna in MLW Technology (opens in a new tab)

  17. Design and fabrication of a variable wall thickness two-stage scroll expander to be integrated in a micro-solar power plant

    … processes, friction between the two scrolls and mechanical losses in the different bearings. A performance enhancement of about 6\% of the isentropic efficiency is predicted in comparison with baseline practice. A CAD model of a single-stage prototype is developed in Solidworks following the main …

    liege Repository record for Design and fabrication of a variable wall thickness two-stage scroll expander to be integrated in a micro-solar power plant (opens in a new tab) Download PDF for Design and fabrication of a variable wall thickness two-stage scroll expander to be integrated in a micro-solar power plant (opens in a new tab)

  18. Design, fabrication and control of hybrid thermal/piezoelectric MEMS array

    … actuator array to provide switching of mechanical motion of a larger meso-scale piezo-electric actuator. The hybrid actuator approach alleviates the main shortcoming of the conventional micro-electro-mechanical systems (MEMS)---the limited stroke and force characteristics, and combines …

    arizona-thes Repository record for Design, fabrication and control of hybrid thermal/piezoelectric MEMS array (opens in a new tab)

  19. TOWARDS HIGH RESOLUTION ENDOSCOPIC OPTICAL COHERENCE TOMOGRAPHY FOR IMAGING INTERNAL ORGANS

    … that minimized chromatic aberrations, and a mechanical assembly that limited field of view blockage to less than 7.5% and maintained an outer diameter of 1.78 mm (with plastic sheath). In conjunction with the algorithm described in chapter 4 to correct for non-uniform rotational distortion, …

    jhu Repository record for TOWARDS HIGH RESOLUTION ENDOSCOPIC OPTICAL COHERENCE TOMOGRAPHY FOR IMAGING INTERNAL ORGANS (opens in a new tab)

  20. Ultra-precise on-axis encoder self-calibration for fast rotary platforms

    … Rotary Platform Design, Manufacturing, and Assembly: A precision rotary platform was designed for encoder calibration and other spindle metrology research. The rotary platform uses a precision airbearing. Two different rotary encoders are included for rotation measurement. Three displacement …

    ubc Repository record for Ultra-precise on-axis encoder self-calibration for fast rotary platforms (opens in a new tab) Download PDF for Ultra-precise on-axis encoder self-calibration for fast rotary platforms (opens in a new tab)

Page 1 of 11