Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 487 for “"mechanical system"”.

  1. VIBRATION INSTABILITY IN FRICTIONALLY DRIVEN ELASTIC MECHANICAL SYSTEM

    Numerous mechanical systems contain surfaces in partial or full sliding contact, and therefore, prone to friction-induced vibration instability. These include systems containing mechanical switches, brakes, clutches, gears, rolling contact bearings, journal bearings, robot end-effector grasp and …

    siu-theses Repository record for VIBRATION INSTABILITY IN FRICTIONALLY DRIVEN ELASTIC MECHANICAL SYSTEM (opens in a new tab)

  2. A mechanical system for grape vine debris removal

    Thesis (M.S.) - Michigan State University. Department of Agricultural Engineering

    msu Repository record for A mechanical system for grape vine debris removal (opens in a new tab)

  3. MICRO-ELECTRO-MECHANICAL SYSTEM OSCILLATING ACCELERAMETERS WITH CMOS READOUT CIRCUITS

    This thesis is focused on the design and implementation of the readout circuit for MEMS oscillating accelerometer due to the fact that it can achieve state-of-the-art noise performance and much larger full scale range simultaneously. Complete phase noise model is proposed to analyze the noise …

    nus Repository record for MICRO-ELECTRO-MECHANICAL SYSTEM OSCILLATING ACCELERAMETERS WITH CMOS READOUT CIRCUITS (opens in a new tab) Download file for MICRO-ELECTRO-MECHANICAL SYSTEM OSCILLATING ACCELERAMETERS WITH CMOS READOUT CIRCUITS (opens in a new tab)

  4. Symbol-Based Control of a Ball-on-Plate Mechanical System

    Modern control systems often consist of networks of components that must share a common communication channel. Not all components of the networked control system can communicate with one another simultaneously at any given time. The "attention" that each component receives is an important factor …

    maryland Repository record for Symbol-Based Control of a Ball-on-Plate Mechanical System (opens in a new tab)

  5. Micro electro mechanical system microphone design, process developmnet and test methodology

    This thesis is a quest to design, fabricate and characterize a MEMS microphone.The investigations done as part of the thesis not only include the design of the microphone, but the manufacturability challenges and test issues as well. The motivation behind covering the breadth of issues in this …

    ttu Repository record for Micro electro mechanical system microphone design, process developmnet and test methodology (opens in a new tab)

  6. Thermo-Mechanical System Identification of a Shape Memory Alloy Actuated Mechanism

    … To investigate this proposal, the biomechanical articulation of the elbow by means of the biceps brachii muscle is compared with that of a SMA actuated arm. This is accomplished by parametric analysis of a crank-slider kinematic mechanism actuated, first, with an experimentally …

    odu Repository record for Thermo-Mechanical System Identification of a Shape Memory Alloy Actuated Mechanism (opens in a new tab)

  7. Applying Digital Twin in a Rotating Mechanical System and a Photovoltaic System

    … of modeling various components within objects or systems in this context, requiring collecting and integrating diverse data types. Consequently, implementing verification and validation (V&V) procedures, alongside model updating, becomes a crucial foundational service for DTs. This approach …

    ttu Repository record for Applying Digital Twin in a Rotating Mechanical System and a Photovoltaic System (opens in a new tab)

  8. Data-Driven and Physics-Aware Machine Learning Methods for Mechanical System Analysis

    Modeling of complex dynamical systems is necessary to facilitate identification, prediction, and control of those system. Which in turn allows for safe, efficient, well-informed operation of those systems. Specifically, unexpected downtime of manufacturing equipment, Computer Numeric Controlled …

    umn Repository record for Data-Driven and Physics-Aware Machine Learning Methods for Mechanical System Analysis (opens in a new tab)

  9. Printed and Flexible Micro-Electro-Mechanical-System (MEMS) Switch for High-Frequency Applications

    A multitude of micro-electro-mechanical-system (MEMS) devices has been developed and commercialized over the past decades. These devices are smaller in size, have higher accuracy, sensitivity, selectivity, and high switching density. All these criteria make MEMS a good alternative for switching and …

    texas-state Repository record for Printed and Flexible Micro-Electro-Mechanical-System (MEMS) Switch for High-Frequency Applications (opens in a new tab)

  10. Stability of controlled mechanical system with parametric uncertainties in a realistic friction model

    … engineers. For high-performance engineering systems, a friction-model-based controller is typically required to accommodate the nonlinearities arisen from the friction model employed. It is well known that the parameters of the friction model used in the friction compensation are nearly …

    manitoba Repository record for Stability of controlled mechanical system with parametric uncertainties in a realistic friction model (opens in a new tab)

  11. A qualitative cross-case analysis of postsecondary students' performance in asynchronous mechanical system laboratories

    … Case One involved a course on agricultural mechanical systems taught at a Texas four-year university with 13 participants. Case Two involved a course on electrical controls taught at the technical center of a Texas community college with 18 participants. Data were collected from observation …

    tamu Repository record for A qualitative cross-case analysis of postsecondary students' performance in asynchronous mechanical system laboratories (opens in a new tab)

  12. State-space modeling, system identification and control of a 4th order rotational mechanical system

    In this thesis, a 4th order rotational mechanical plant provided by Educational Control Products is modeled from first principles and represented in state-space form. Identification of the state-space parameters was accomplished using the parameter estimation function in Matlab's System …

    nps Repository record for State-space modeling, system identification and control of a 4th order rotational mechanical system (opens in a new tab)

  13. Coupled electro-mechanical system modeling and experimental investigation of piezoelectric actuator-driven adaptive structures

    … and parametric optimization of the integrated system. The statics-based modeling approaches have been applied to model piezoelectric (PZT) actuator-driven adaptive structures. The dynamic interaction between the actuators and their host structures has been ignored, and the system energy …

    vt Repository record for Coupled electro-mechanical system modeling and experimental investigation of piezoelectric actuator-driven adaptive structures (opens in a new tab)

  14. Design and Fabrication of Electrostatically Actuated and Inkjet Printed Micro-Electro-Mechanical-System (MEMS) Switch

    … device. The physical structure of the switching system consists of an anchor, the cantilever beam, top electrode and bottom transmission lines. During the fabrication process, different printed layers are characterized with respect to terminal resistances, sheet resistances of the materials, …

    texas-state Repository record for Design and Fabrication of Electrostatically Actuated and Inkjet Printed Micro-Electro-Mechanical-System (MEMS) Switch (opens in a new tab)

  15. Pathological Tremor as a Mechanical System: Modeling and Control of Artificial Muscle-Based Tremor Suppression

    Central nervous system disorders produce the undesired, approximately rhythmic movement of body parts known as pathological tremor. This undesired motion inhibits the patient's ability to perform tasks of daily living and participate in society. Typical treatments are medications and deep brain …

    ucf Repository record for Pathological Tremor as a Mechanical System: Modeling and Control of Artificial Muscle-Based Tremor Suppression (opens in a new tab)

  16. Micro electro-mechanical system design, fabrication and application for atomic force microscopy probe elasticity characterisation

    … and development of a dedicated micro electro-mechanical system (MEMS) solution. The sensitive force and elasticity measurement device, based on metal film resistive strain sensing, was realised using semiconductor and MEMS fabrication approaches in the James Watt Nanofabrication Centre, …

    glasgow Repository record for Micro electro-mechanical system design, fabrication and application for atomic force microscopy probe elasticity characterisation (opens in a new tab) Download PDF for Micro electro-mechanical system design, fabrication and application for atomic force microscopy probe elasticity characterisation (opens in a new tab)

Page 1 of 25