Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"melt polymerization"”.
-
Reversibly Photo-Crosslinkable Polycarbonate-Based Polymersomes for Drug Encapsulation and Delivery
… ester, ether, or amide linkages. While the homopolymerization of these functionalized monomers proved challenging due to their high melting points, both cinnamoyl and coumarin functionalized monomers were successfully copolymerized with trimethylene carbonate (TMC) at 100 ℃ using a catalyst-free …
-
THE DEVELOPMENT OF ORGANIC REDOX-ACTIVE MATERIALS FOR BATTERIES
… good electrical conductivity was prepared by melt-polymerization. We demonstrate that HATN can be a versatile high-energy electrode for aqueous low-cost metal ion batteries. Considering that HATN polymer presents high surface for sulfur host as well as high bulk density needed to fabricate …
-
Synthesis and Characterization of Copolyesters Based on Vanillic Acid or Syringic Acid and Dodecanedioic Acid
… a specic need. First, a catalyst to optimize melt polymerization of 1,4-diacetoxybenzene (HQ), 4-acetoxybenzoic acid (BA), and dodecanedioic acid (DA) was determined. Acetylation of VA and SyA was necessary to produce compatible monomers. Then, two series of polymers based on HQ, BA, DA, and …
-
Renewable Aliphatic Polyester Block Polymer Thermoplastic Elastomers
… and phase behavior, molecular architecture and melt processability, to melt polymerization strategies were investigated. ABA triblock polymers with PLA end-blocks and rubbery mid-blocks from substituted lactones comprised of poly(6-methyl-ε-caprolactone)(PMCL), poly(δ-decalactone), and …
-
Μελέτη της ανοσοαπόκρισης μετά την διαδερμική χορήγηση αντιγόνου εγκλεισμένου σε νανόσφαιρες πολυ(γαλακτικού οξέος)
… in the skin. PLA polymer was synthesized by melt polymerization and was characterized by 1H-NMR and gel permeation chromatography (GPC). OVA-loaded nanospheres were prepared by a double emulsion technique and characterized for their size by photon correlation spectroscopy and for antigen …
-
Temperature-pressure-composition model for melt viscosity in the Di-An-Ab system
A model for the viscosity (η) of melts in the system CaMgSi₂O₆-CaAl₂Si₂O₈-NaAlSi₃O₈ (Di-An-Ab) based on data compiled from the literature is presented. The model is calibrated on 560 measurements of melt viscosity at 1 bar pressure on 40 individual melt compositions and 303 measurements obtained at …
-
Metal-silicate Partitioning Behavior of Molybdenum, Tungsten, and Nickel: Implications for Core Formation
… solid state convection and thus decompression melting and hot spot volcanism. Therefore determining how Earth's core formed and if that process was unique to our planet in the solar system is of great scientific interest. Core formation can be studied experimentally by examining the …
-
Novel phosphorus containing poly(arylene ethers) as flame retardant additives and as reactant in organic synthesis
… which was prepared in solvent free bulk (melt) polymerization technique from trivalent phosphorus monomer and a silylated diphenol in presence of CsF. Purification and the recovery of the final product which is always a big challenge in case of Mitsunobu reaction, was far more easier using …
-
Design of Functional Polyesters for Electronic and Biological Applications
Melt polymerization and novel monomers enabled the synthesis of polyesters for electronic and biological applications. Inspiration from nature and a passion for environmental preservation instigated an emphasis on the incorporation of renewable resources into polymeric materials. Critical analysis …
-
Advancing Step-Growth Polymers: Novel Macromolecular Design and Electrostatic Interactions in Polyesters and Polyurethanes
Conventional melt transesterification successfully synthesized high molecular weight segmented copolyesters. The cycloaliphatic monomers 2,2,4,4-tetramethyl-1,3-cyclobutanediol (CBDO) and dimethyl-1,4-cyclohexane dicarboxylate (DMCD) afforded sterically hindered, ester carbonyls in high-Tg …
-
Synthesis and Characterization of Branched Macromolecules for High Performance Elastomers, Fibers, and Films
An A2 + B3 polymerization for the synthesis of hyperbranched polymers was altered using oligomeric precursors in place of either one or both of the monomer pairs to synthesize highly branched macromolecules. Unique topologies that are intermediates between long-chain branched and hyperbranched …
-
Synthesis and Characterization of Multicomponent Polyesters via Step-growth Polymerization
… contents were synthesized using conventional melt polymerization. Solid state sodium NMR spectroscopy and melt rheological analysis demonstrated that the stability of ionic aggregates of telechelic ionomers decreased dramatically with an increase in temperature. A slightly branched structure …
-
Trace elements in silicate melts and the thermal conductivity of the earth’s deep mantle
… incorporation of trace elements into silicate melts and their partitioning behavior in the presence of silicate melts. Second, the atomistic modeling approach is employed to obtain the lattice thermal conductivity of lower- mantle minerals at high pressures and temperatures. In chapter 1, the …
-
Παρασκευή και μελέτη ιδιοτήτων ομοπολυεστέρων και συμπολυεστέρων του βανιλικού οξέος
… was carried out, with the aim of its successful polymerization. In the second part of the thesis, the synthesis and extensive characterization of homopolyesters based on vanillic acid and alcohols with different number of alkylene groups was carried out, through the two-step melt polymerization …
-
Synthesis and Characterization of trans-1,4-Cyclohexylene Ring Containing Poly(arylene ether sulfone)s
… PAESs were comprehensively studied. Different polymerization techniques were used to synthesize polymers with different segmental lengths. The monomer, 4,4'-[trans-1,4-cyclohexanebis(methylene)] bisphenol (CMB), was synthesized and fully characterized. Based on 4,4′-dihydroxy-p-terphenyl …
-
Synthesis and characterization of high performance polymeric materials: poly(arylene ethers), polyamides, polyesters and liquid crystalline polyarylates
… structures of PAEs were synthesized and this polymerization route allowed both random and block copolymers to be prepared. Triaryl phosphine oxide containing homo-& co-PAEs exhibited very high char yields, which suggested that these polymers were potentially flame-resistant materials. The AB …
-
Συνέργεια νανοτεχνολογίας και πολυμερισμού στερεάς κατάστασης για την αναβάθμιση πολυαμιδικών ρητινών
… optimization, such as by applying solid state polymerization (SSP), due to the need of higher molecular weight resins, or anhydrous melt polymerization, with both techniques bypassing the use of water as a solvent with consequent cost and natural resources saving. Moreover, the latter …
-
Synthesis and Characterization of Cycloaliphatic and Aromatic Polyester/Poly(dimethylsiloxane) Segmented Copolymers
… cycloaliphatic copolymers were synthesized via a melt process using a high trans content 1,4 dimethylcyclohexanedicarboxylate, and 1,4 butanediol or cyclohexanedimethanol, while the partially aromatic systems were synthesized using dimethyl terephthalate and butanediol. Primary and secondary …
-
Synthesis and Characterization of Novel Telechelic High Performance Polyester Ionomers
… acid (SSBA) were synthesized using catalyzed melt polymerization techniques. Various concentrations of the ionic end group, SSBA, were successfully incorporated in a telechelic fashion. For comparison, polyesters containing telechelic alkyl groups with controllable molecular weights were also …
-
Tailoring Siloxane Functionality for Lithography-based 3D Printing
… possesses many desirable traits for vat photopolymerization (VP) AM, namely that it proceeds rapidly to high yield, does not undergo significant side reactions, remains tolerant of the presence of water or oxygen, and remains regiospecific. Leveraging these traits, a novel PDMS-based …
Page 1 of 2