Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"melt processability"”.

  1. Melt Processability and Post-Processing Treatment of High Temperature Semi-Crystalline Thermoplastics for Extrusion Deposition Additive Manufacturing

    … section of this work involves determining the melt processability by evaluating the thermal and rheological characteristics of these materials under different processing conditions that can be encountered during EDAM processing. Establishing the link between rheological properties and printing …

    utk-theses Repository record for Melt Processability and Post-Processing Treatment of High Temperature Semi-Crystalline Thermoplastics for Extrusion Deposition Additive Manufacturing (opens in a new tab)

  2. Development of a hyaluronan-polyethylene copolymer for use in articular cartilage repair

    … environment. Although the material has limited melt-processability, it is more processable than HA and was successfully compression molded into samples for physical, mechanical and in vitro biological characterization (e.g., swell ratio, dynamic mechanical analysis). HA-co-HDPE exploits the …

    colostate Repository record for Development of a hyaluronan-polyethylene copolymer for use in articular cartilage repair (opens in a new tab)

  3. Krzemoorganiczne modyfikatory polimerowych środków adhezyjnych

    … while preserving tack, adhesion and hot-melt processability. Organofunctional silanes were screened in butyl-rubber/polyisobutylene matrices, followed by development of a reactive bromobutyl-rubber system modified with 3-aminopropyltriethoxysilane (APTES). Rheological, mechanical, thermal …

    amu-pl Repository record for Krzemoorganiczne modyfikatory polimerowych środków adhezyjnych (opens in a new tab)

  4. Chemical Tailoring of Lignin for Functional and Sustainable Material Solutions

    … However, its hydrophilicity, lack of melt processability, and poor dispersibility have hindered its wide-scale application. Structural modifications are expected to counter its detrimental properties effectively. Thus, the first part of this work employed a silylation reaction to …

    waterloo Repository record for Chemical Tailoring of Lignin for Functional and Sustainable Material Solutions (opens in a new tab)

  5. Renewable Aliphatic Polyester Block Polymer Thermoplastic Elastomers

    … and phase behavior, molecular architecture and melt processability, to melt polymerization strategies were investigated. ABA triblock polymers with PLA end-blocks and rubbery mid-blocks from substituted lactones comprised of poly(6-methyl-ε-caprolactone)(PMCL), poly(δ-decalactone), and …

    umn Repository record for Renewable Aliphatic Polyester Block Polymer Thermoplastic Elastomers (opens in a new tab)

  6. Synthesis and characterization of linear and star-branched butadiene-isoprene block copolymers and their hydrogenated derivatives

    … for processing. Above the endothermic melting temperature of the semicrystalline end. blocks, the now amorphous system can approach the melt behavior of a singlephase melt, that is, displaying negligible "physical" network structure in the melt. Overall, these systems display a valuable …

    vt Repository record for Synthesis and characterization of linear and star-branched butadiene-isoprene block copolymers and their hydrogenated derivatives (opens in a new tab)

  7. Melt processable biomaterials for degradable surgical fixation devices

    … controlled degradation rates with ease of melt processability. There are however, many applications ranging from surgical fixation devices to drug delivery systems which require such combination properties. The work in this thesis is an attempt to increase the availability of such …

    aston Download PDF for Melt processable biomaterials for degradable surgical fixation devices (opens in a new tab)

  8. Synthesis and Non-Covalent Interactions of Novel Phosphonium-Containing Polymers

    … structure of ionic aggregates regulates polymer melt processability. This dissertation highlights phosphonium-based chemistry for the synthesis of novel step-growth ionomers and structure-property relationships in ionic polymers. The synthesis of phosphonium endcapping reagents for melt polyester …

    vt Repository record for Synthesis and Non-Covalent Interactions of Novel Phosphonium-Containing Polymers (opens in a new tab)

  9. Synthesis and Applications of Cellulose Derivatives for Drug Delivery

    … for specific drug formulations. The use of melt extrusion in processing some of these drug/polymer dispersions provides a means of highlighting the capability for the use of these cellulosics in melt extruded amorphous dispersions. This solvent free, high pressure method significantly …

    vt Repository record for Synthesis and Applications of Cellulose Derivatives for Drug Delivery (opens in a new tab)

  10. Synthesis and Rheological Properties of Branched Polylactide

    … future. However, its use is hampered by its poor melt processability in extensional flows. The work in this dissertation has sought to better understand how the polymer architecture can improve this limitation. The research presented here describes the means of implementing PLA into an …

    umn Repository record for Synthesis and Rheological Properties of Branched Polylactide (opens in a new tab)

  11. An Investigation of Bimodal Cellular Distributions via Supercritical Fluid Assisted (SCF) Foam Injection Molding

    … drawbacks: its inherent brittle nature and poor melt processability. Blending PLA with an inherently toughened counterpart provides an effective mechanism to overcome both these drawbacks [2]. Additionally, foaming of PLA-based blends can provide a replacement for synthetic structural foams. …

    clemson Repository record for An Investigation of Bimodal Cellular Distributions via Supercritical Fluid Assisted (SCF) Foam Injection Molding (opens in a new tab)

  12. Studies on High-Performance Sustainable Blends from Lignin, a Low- Cost Renewable Feedstock

    … and lignin without chemical modification using melt-blending technique, which is technically the most convenient and inexpensive method. Thus, the approach aimed to find value for lignin, a low-cost byproduct of modern biorefineries and woody biomass pulping industry. More specifically, we …

    utk-theses Repository record for Studies on High-Performance Sustainable Blends from Lignin, a Low- Cost Renewable Feedstock (opens in a new tab)

  13. Void-Free Flame Retardant Phenolic Networks: Properties and Processability

    … improvement when compared to epoxy composites. Melt processability of phenolic/epoxy composites has been achieved through the use of latent nucleophilic initiators. Kinetics of the phenolic/epoxy cure reactions with latent initiators demonstrated that monomeric phosphine initiators yielded …

    vt Repository record for Void-Free Flame Retardant Phenolic Networks: Properties and Processability (opens in a new tab)

  14. Strategies to Create Electrically Conductive Polymer/Graphene Composites

    … polymer composites, typically constructed by melt compounding conductive fillers into a polymer matrix, enjoy specialized applications such as electrostatic discharge protection. Graphene nanoplatelets (GNPs) exhibit high inherent electrical conductivity and geometric anisotropy, thus require …

    umn Repository record for Strategies to Create Electrically Conductive Polymer/Graphene Composites (opens in a new tab)

  15. Crystallization, Morphology, Thermal Stability and Adhesive Properties of Novel High Performance Semicrystalline Polyimides

    … material and ability to crystallize from the melt; (c) fast crystallization kinetics and (d) melt processability. This unique combination of properties is presently unavailable in any other polyimide. In this regard, the present work investigates the crystallization, morphology and thermal …

    vt Repository record for Crystallization, Morphology, Thermal Stability and Adhesive Properties of Novel High Performance Semicrystalline Polyimides (opens in a new tab)

  16. Upcycling of Polyolefins Through Functionalization

    … through several reprocessing cycles due to the melt processability enabled by the presence of a urethane exchange catalyst. On the second route, PP was oxidated in a melt extruder using several flow conditions, extrusion time and additives. Several functionalities were obtained with the tradeoff …

    houston Repository record for Upcycling of Polyolefins Through Functionalization (opens in a new tab) Embargoed until 2027-05-01

  17. Unlocking the potential of crosslinked polymers: from dynamic covalent bonds to recyclable thermosets

    … of static thermosets but access flow-state melt processability by triggering crosslink-bond exchange. Several impactful and fundamental advances to this topic and broader sustainable chemistry are discussed herein: demonstration of new dynamic covalent bonds, establishment of intra- and …

    colostate Repository record for Unlocking the potential of crosslinked polymers: from dynamic covalent bonds to recyclable thermosets (opens in a new tab)

  18. Starch modification for sustainable and functional material applications

    … two material applications: Hydrophobic and melt processable starch esters for possible degradable plastic applications, and antimicrobial polymer surfaces for packaging and biomedical devices where starch is used as the major constituent. The use this biodegradable polymer could potentially …

    waterloo Repository record for Starch modification for sustainable and functional material applications (opens in a new tab)

  19. Modifications of Zein Biopolymer for Material Applications: Biopolymer Blends, Films, Bioactive Delivery Nanoparticles, and Nanofibers

    … hindered by intrinsic limitations, such as poor processability, inadequate mechanical properties, and limited thermal stability. This research aims to address these challenges through chemical modifications of zein, blending with complementary polymers, and employing advanced fabrication …

    waterloo Repository record for Modifications of Zein Biopolymer for Material Applications: Biopolymer Blends, Films, Bioactive Delivery Nanoparticles, and Nanofibers (opens in a new tab)

  20. Crystallization behavior and structure property behavior of selected thermoplastic polymers

    … general morphological features, equilibrium melting point, and abso1ute crystalline percentage of linear and starbranched nylon-6 have been studied as a function of branch-point functionality and crystallization temperature. Overall bulk crystallization rates were described in terms of the …

    vt Repository record for Crystallization behavior and structure property behavior of selected thermoplastic polymers (opens in a new tab)

Page 1 of 2