Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 434 for “"metallization"”.

  1. Failure in metallization systems

    <P>WITH THE INCREASING NEED FOR BETTER CONDUCTIVITY MATERIAL FOR THE TRANSISTOR BACK-END INTERCONNECT SYSTEM, THE INDUSTRY HAS SWITCHED TO COPPER AS THE METAL OF CHOICE. THE PRESENT WORK INVESTIGATES THE VARIOUS IMPLICATIONS OF IMPLEMENTING COPPER IN THE BACKEND INTERCONNECT SYSTEM OF A MICROCHIP. …

    nus Repository record for Failure in metallization systems (opens in a new tab) Download file for Failure in metallization systems (opens in a new tab)

  2. Metallization on Si-Ge Alloys

    Silicides are used as low resistivity contacts in VLSI circuits. As devices dimension starts to shrink, the existing silicides used have their drawbacks. For this report, the silicidation or germanization reaction of nickel film on (100)Si, polycrystalline Si/Ge/Si79Ge21 was investigated. It was …

    nus Repository record for Metallization on Si-Ge Alloys (opens in a new tab) Download file for Metallization on Si-Ge Alloys (opens in a new tab)

  3. Tantalum-based diffusion barriers for copper metallization

    … in the Si/Ta/Cu, Si/TaC/Cu and Si/Ta2N/Cu metallization systems are studied experimentally and theoretically by utilizing the ternary Si-Ta-Cu, Si-Ta-C, Si-Ta-N, Ta-C-Cu, and Ta-N-Cu phase diagrams as well as the activity diagrams calculated at different temperatures. The effects of oxygen …

    aalto Repository record for Tantalum-based diffusion barriers for copper metallization (opens in a new tab)

  4. LPCVD TUNGSTEN MULTILAYER METALLIZATION FOR VLSI SYSTEMS.

    … the unacceptable high time delays. Multilayer metallization enables shorter interconnects, ease of design and yet higher packing density for VLSI circuits. It was shown in this dissertation that, tungsten films deposited in a cold-wall LPCVD reactor offer viable solution to the problems of VLSI …

    arizona-thes Repository record for LPCVD TUNGSTEN MULTILAYER METALLIZATION FOR VLSI SYSTEMS. (opens in a new tab)

  5. Advanced metallization for screen-printed solar cells

    Solar cells with screen printed metallization have been dominating the PV market for decades due to the well understood and robust fabrication process and the readily available production equipment. However, the efficiency of this type of solar cells is limited by some fundamental weaknesses such …

    unsw Repository record for Advanced metallization for screen-printed solar cells (opens in a new tab)

  6. Metallization and Modification of Low-k Dielectric Materials

    Aluminum was deposited onto both Teflon AF and Parylene AF surfaces by chemical vapor deposition of trimethylaluminum. This work shows that similar thin film (100 Angstroms) aluminum oxide adlayers form on both polymers at the low temperature dosing conditions used in the studies. Upon anneal to …

    unt Repository record for Metallization and Modification of Low-k Dielectric Materials (opens in a new tab)

  7. Metallization of silicon solar cells with passivating contacts

    This work develops and analyzes innovative metallization and contact formation of next-generation silicon solar cells, namely silicon heterojunction (SHJ) and Tunnel Oxide Passivating Contact (TOPCon) cells. Thereby, the focus is set on metallization with reduced silver consumption along with …

    freiburg-diss Repository record for Metallization of silicon solar cells with passivating contacts (opens in a new tab)

  8. Thermal Stability of Barrier Layers for Copper Metallization

    … stability of the barrier layers for copper metallization. The need for thin diffusion barriers due to decrease in feature size has led to the examination of four different barrier schemes with two different thicknesses of TiN and two different thicknesses of Parylene. The barrier thicknesses …

    boise Repository record for Thermal Stability of Barrier Layers for Copper Metallization (opens in a new tab)

  9. Thermomechanical stress studies for advanced copper metallization and integration

    Thermomechanical stresses in the copper interconnects are directly related to void formation and interfacial delamination. In this study, the stress behavior of electroplated copper films was investigated using surface curvature measurement, with an emphasis on the passivation effect. It was found …

    texas Repository record for Thermomechanical stress studies for advanced copper metallization and integration (opens in a new tab) Restricted access

  10. Planar metallization failure modes in integrated power electtonics modules

    … into planar power modules by using planar metallization, which is a technology involving electrical, mechanical, material, and thermal issues. By processing high dielectric materials, magnetic materials, or silicon chips using compatible manufacturing procedures, and by carefully designing …

    vt Repository record for Planar metallization failure modes in integrated power electtonics modules (opens in a new tab)

  11. Chemical vapor deposition of thin films for ULSI interconnect metallization

    … chemical vapor deposition (CVD) for interconnect metallization using solution delivery of Cu(hfac)2 (Cu(II) hexafluoroacetyl-acetonate) dissolved in isopropanol. We observe a growth rate of 17.7 „b 1.5 nm/min at reference conditions of 300„aC substrate temperature, 0.025 Torr Cu(hfac)2 partial …

    lsu-thes Repository record for Chemical vapor deposition of thin films for ULSI interconnect metallization (opens in a new tab)

  12. Metallization of Self-Assembled DNA Templates for Electronic Circuit Fabrication

    … of the bulk material. An improved method for the metallization of DNA origami is examined in this work that addresses these challenges of size, morphology and conductivity of the metallized structure. Specifically, we demonstrated a metallization process that uses gold nanorod seeds followed by …

    byu Repository record for Metallization of Self-Assembled DNA Templates for Electronic Circuit Fabrication (opens in a new tab) Download PDF for Metallization of Self-Assembled DNA Templates for Electronic Circuit Fabrication (opens in a new tab)

  13. Contact Metallization Design for Low-Temperature Interconnects in MEMS Integration

    … structures, and using a thin film contact metallization deposited via physical vapor deposition (PVD) on the device's wafer side, providing an alternative to wet chemical processes. Therefore, this thesis aimed to identify suitable contact metallizations for Cu-Sn-based SLID systems, design …

    aalto Repository record for Contact Metallization Design for Low-Temperature Interconnects in MEMS Integration (opens in a new tab)

  14. Thermal stress and stress relaxation in copper metallization for ULSI interconnects

    … stress and mass transport are key issues for Cu metallization yield and reliability. In this study, thermal stresses in Cu films, and line structures with three types of inter-level dielectric (ILD), SiOF, CDO (carbon doped oxide) and SiLK, and the linewidths of 0.2µm and 0.4µm, were …

    texas Repository record for Thermal stress and stress relaxation in copper metallization for ULSI interconnects (opens in a new tab)

  15. Laser Metallization And Doping For Silicon Carbide Diode Fabrication And Endotaxy

    … With the aim of overcoming some challenges in metallization and doping during the fabrication of silicon carbide devices, a novel laser-based process is provided to direct metallize the surface of silicon carbide without metal deposition and dope in silicon carbide without high temperature …

    ucf Repository record for Laser Metallization And Doping For Silicon Carbide Diode Fabrication And Endotaxy (opens in a new tab)

  16. Adherence/Diffusion Barrier Layers for Copper Metallization: Amorphous Carbon:Silicon Polymerized Films

    … Spectroscopy was used to characterize Cu metallization of these a-Si:C:H films. XPS revealed substantial Cu wetting of a-Si:C:H/OH and a-Si:C:H/OH/N films and some wetting of a-Si:C:H/N films, and similar Cu diffusion inhibition to 800 K by all of the a-:S:C:H films. These findings suggest …

    unt Repository record for Adherence/Diffusion Barrier Layers for Copper Metallization: Amorphous Carbon:Silicon Polymerized Films (opens in a new tab)

Page 1 of 22