Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"metallographic analysis"”.

  1. Συμπεριφορά πορωδών υλικών σε έντονα φορτία κρούσης

    In the present work, a metallographic analysis of the structure of Alporas foam is performed, for commercial samples, as well as for samples that were produced by similar methods in the laboratory. The purpose of the metallographic analysis was to characterize the structure, as well as to determine …

    greece Repository record for Συμπεριφορά πορωδών υλικών σε έντονα φορτία κρούσης (opens in a new tab)

  2. Comparison of 43Sn/43Pb/14Bi Solder and Standard 60Sn/40Pb Solder by Thermocyclic Fatigue Analysis

    … to that of standard 60Sn/4OPb solder via metallographic analysis (using scanning electron microscopy) and evaluation of the degree of fatigue development (using a fatigue scale as a function of thermocycles). Specimens were subjected to shearing strains imposed by several hundred fatigue …

    unt Repository record for Comparison of 43Sn/43Pb/14Bi Solder and Standard 60Sn/40Pb Solder by Thermocyclic Fatigue Analysis (opens in a new tab)

  3. Preliminary Investigation of Metallurgical Structure and Mechanical Properties of Cast Iron With High Aluminum Content

    … of the iron; ( e) prepare and perform a metallographic analysis of the samples from representative regions of the casting; (t) conduct the tests of tensile strength and hardness. Necessary data was collected during the all stages of the experiment. The results were analyzed, and it was …

    northern-iowa Repository record for Preliminary Investigation of Metallurgical Structure and Mechanical Properties of Cast Iron With High Aluminum Content (opens in a new tab)

  4. A preliminary investigation of the effects of environmentally assisted cracking on natural gas transmission pipelines

    … up to 0.75 mm (0.03 in) were revealed during metallographic analysis. A Marin factor analogy and an energy method concept are suggested and explored. Ultimately, the test data set was too small for the results to be of any directly applicable significance.

    tamu Repository record for A preliminary investigation of the effects of environmentally assisted cracking on natural gas transmission pipelines (opens in a new tab)

  5. Variation of Sheet Metal Formability in Biaxial Stretching Processes

    … bulged to failure. A quantitative metallographic analysis is also performed in an effort to establish a relationship between microstructural parameters and formability.</p> <p>A hypothetical model of ductile fracture is proposed to predict the formability of a sheet which contains a …

    mcmaster Repository record for Variation of Sheet Metal Formability in Biaxial Stretching Processes (opens in a new tab)

  6. Study of Threading Operations in Austempered Ductile Iron

    … cutting force data, surface profilometry, and metallographic analysis. Thread forming was successful and, under the appropriate conditions, can surpass the performance of a cut tap. Threads that were formed had a greater concentration of martensite within the matrix at the threads than those …

    texas-state Repository record for Study of Threading Operations in Austempered Ductile Iron (opens in a new tab)

  7. Fault tree analysis of failure in boron-aluminum composites

    … ordinary sample preparation cannot be used for metallographic analysis. Frequently, the use of abrasive techniques, such as grinding and polishing, further degrades the material, making an accurate assessment of fiber damage difficult at best and possibly even misleading. To overcome this …

    vt Repository record for Fault tree analysis of failure in boron-aluminum composites (opens in a new tab)

  8. Process Kinetics of Transient Liquid Phase

    … calorimetry (DSC), neutron diffraction (ND), and metallographic techniques has enabled the quantitative characterization of important TLPS stages (i.e., solid-state sintering, melting and dissolution, isothermal solidification, and homogenization) as well as verifying the re-melt behaviour of …

    waterloo Repository record for Process Kinetics of Transient Liquid Phase (opens in a new tab)

  9. Estudo experimental do deslizamento lubrificado de metais em contato cilindro-plano

    … through measures of roughness, hardness, metallographic analysis and DRX. Density measurements, viscosity, flash point and acidity were performed to characterize the oil lubricants. The wear mechanisms on metal surfaces were analyzed by optic (OM) and scanning electron microscopy (SEM). …

    brazil-ufrn Repository record for Estudo experimental do deslizamento lubrificado de metais em contato cilindro-plano (opens in a new tab)

  10. Caracterização microestrutural da zona de transição de tubos de aço 9%Ni revestidos com superliga de níquel 625 com processo de soldagem GTAW-HW

    … as Vickers microhardness, shear and bend tests. Metallographic analysis identified type I and II boundaries with distinct chemical gradients, MC-type carbides, Laves/γ eutectics, peninsulas macrosegregation, crystallographic texture close to <100> in the clads, residual strain, and drop of …

    brazil-uerj Repository record for Caracterização microestrutural da zona de transição de tubos de aço 9%Ni revestidos com superliga de níquel 625 com processo de soldagem GTAW-HW (opens in a new tab)

  11. Avaliação das técnicas de soldagem MIG-P CA e MIG-P CC+ aplicadas ao passe de enchimento em liga de alumínio AA5083

    … and the thermal behavior respectively, and the metallographic analysis for macrographic view of the weld beads and non-destructive testing by radiography for observation of possible discontinuities. It was found that the technique of MIG-P CA showed better results ahead of another technique both …

    brazil-ufrn Repository record for Avaliação das técnicas de soldagem MIG-P CA e MIG-P CC+ aplicadas ao passe de enchimento em liga de alumínio AA5083 (opens in a new tab)

  12. Analysis and rehabilitation of the 1882 wrought iron bridge

    … and Bridge Company of Ohio. A tensile test and metallographic analysis were performed on samples taken from the bridge, and it was determined that the bridge is composed of at least two grades of wrought iron. The tests also indicated the presence of brittle iron. The wood decking system, the …

    alabama Repository record for Analysis and rehabilitation of the 1882 wrought iron bridge (opens in a new tab)

  13. Stress Intensity Factor Dependence Of Hg-al Liquid Metal Embrittlement

    … of LME. These mechanical test data, along with metallographic analysis, show that the phenomena of LME is both strongly time- and SIF-dependent.

    ucf Repository record for Stress Intensity Factor Dependence Of Hg-al Liquid Metal Embrittlement (opens in a new tab)

  14. M5Si3 (M=Ti, Nb, Mo) based transition-metal silicides for high temperature applications

    … system has been evaluated experimentally using metallographic analysis and differential thermal analyzer (DTA). It was shown that Nbss (solid solution) and NbB are the only two primary phases in the 0-40 at.% B composition range, and the eutectic reaction L ↔ Nbss + NbB was determined to occur …

    iastate Repository record for M5Si3 (M=Ti, Nb, Mo) based transition-metal silicides for high temperature applications (opens in a new tab)

  15. Processing of Aluminum Alloys Containing Displacement Reaction Products

    … during mechanical alloying. Differential thermal analysis of the mechanically alloyed powders indicated that increased milling time inhibited the initiation of the displacement reactions. It is believed that the reactions were inhibited because of heat dissipation from reacting oxide particles in …

    vt Repository record for Processing of Aluminum Alloys Containing Displacement Reaction Products (opens in a new tab)

  16. Friction Taper Plug Welding as a Repair Method for Fatigue Damage Around Fastener Holes in Aerospace Structures

    … the FTPW process. Microhardness testing and metallographic analysis were used to map the effects of thermomechanical processing in a repair. Simulated repairs were machined into a tensile sample. A 6.35mm hole was bored axially through the repair center to simulate a new fastener hole. Static …

    byu Repository record for Friction Taper Plug Welding as a Repair Method for Fatigue Damage Around Fastener Holes in Aerospace Structures (opens in a new tab) Download PDF for Friction Taper Plug Welding as a Repair Method for Fatigue Damage Around Fastener Holes in Aerospace Structures (opens in a new tab)

  17. Machinability of Crankshaft Steel: On the Influence of Batch-to-Batch Material Variations

    … the literature was reviewed. Later, an in-depth metallographic analysis was performed on one crankshaft from each batch using optical and electron microscopy to determine the composition, distribution, morphology, size, and type of NMIs along with microstructural differences. Cutting tool inserts …

    chalmers Repository record for Machinability of Crankshaft Steel: On the Influence of Batch-to-Batch Material Variations (opens in a new tab)

  18. Análise tribológica de um sistema de acionamento alternativo de pigs para a indústria do petróleo

    … curves of the products were characterized using metallographic analysis, microhardness Vickers tests, X-ray diffraction (XRD), X-Ray Refraction (XRF) and tensile tests. After the experiments were analyzed some parameters that have been measurable, it demonstrates to the impracticality of this …

    brazil-ufrn Repository record for Análise tribológica de um sistema de acionamento alternativo de pigs para a indústria do petróleo (opens in a new tab)

  19. Selective laser melting of elemental aluminum silicon mixtures

    … to homogenize the silicon aluminum matrix. Metallographic analysis was performed throughout the experiment to determine the underlying materials processes. Dense parts without solidification cracking were produced and silicon dissolution into the aluminum matrix was verified using scanning …

    texas Repository record for Selective laser melting of elemental aluminum silicon mixtures (opens in a new tab)

  20. Η επεξεργασία του χαλκού και του σιδήρου και τα μεταλλικά αντικείμενα της Υστέρας Εποχής του Χαλκού και του Σιδήρου στην Νότιον Ελλάδα

    … methods, like: SEM, XRF, optical microscopy, metallographic analysis etc. Aim of this study constituted the interdisciplinary investigation of archaeometallurgical finds, technological attachments and by-products, as well as the study of metal objects from Southern Greece, focusing in …

    greece Repository record for Η επεξεργασία του χαλκού και του σιδήρου και τα μεταλλικά αντικείμενα της Υστέρας Εποχής του Χαλκού και του Σιδήρου στην Νότιον Ελλάδα (opens in a new tab)

Page 1 of 3