Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"micro molding"”.

  1. a study on the feasibility of 3D micromachining and micro-molding using nanosecond laser

    … in almost every field of manufacturing. Laser micromachining can produce high-precision microstructures and micro-components. The current project proposes an air jet-assisted laser micromachining for the fabrication of 3D microstructures and micro-molds. In the developed laser micromachining …

    concordia Download PDF for a study on the feasibility of 3D micromachining and micro-molding using nanosecond laser (opens in a new tab)

  2. Metal-transfer-molding (MTM) technique for micromachined RF components

    This dissertation reports a metal-transfer-molding (MTM) technique for simultaneous implementation of air-lifted RF passive components, as well as coplanar waveguide (CPW) structures, in a high performance and potentially cost-effective fashion. A metal transfer mechanism is introduced into the …

    gatech Repository record for Metal-transfer-molding (MTM) technique for micromachined RF components (opens in a new tab)

  3. Conductive Nanocomposite-Based Soft Electronic Interfaces for Continuous Physiological Monitoring

    … can be patterned via a simple, low-cost micro-molding process and transferred onto various adhesives for skin-interfaced electrophysiological sensing. We validated the performance of nanocomposite-based wearable sensors by comparing them with gold standard gel electrodes for continuous …

    tamu Repository record for Conductive Nanocomposite-Based Soft Electronic Interfaces for Continuous Physiological Monitoring (opens in a new tab)

  4. Development of a hybrid thermoplastic forming process for the manufacture of multi-facet and curvilinear surgical blades from bulk metallic glass

    … forming processing involving sequential micro-molding and micro-drawing operations is developed to manufacture the multi-facet/curvilinear geometries found on most surgical blades. This is accomplished through an oblique drawing technique, i.e. drawing with a non-zero inclination angle. …

    uiuc Repository record for Development of a hybrid thermoplastic forming process for the manufacture of multi-facet and curvilinear surgical blades from bulk metallic glass (opens in a new tab)

  5. Investigation of defects on acoustic scattering in cloak by molding process

    For this paper, molding- and casting-based microfabrication of metal microstructures was developed in order to replicate the acoustic cloak. The metal was cast into a stretchable PDMS mold, which was cast from micromachined aluminum cloak. For the PDMS mold, the mold release agent, trichlorosilane …

    uiuc Repository record for Investigation of defects on acoustic scattering in cloak by molding process (opens in a new tab)

  6. Modifizierung und Prozessierung des rekombinanten Spinnenseidenproteins eADF4(C16) zur Steuerung der Interaktion zwischen Zellen und Seidenfilmen

    … wurden mittels Mikroabformung in Kapillaren (micro‐molding in capillaries, MIMC) strukturierte Seidenfilme mit parallelen Rillen hergestellt. Im Vergleich zu glatten eADF4(C16) Filmen konnte die Zelladhäsion auf den so hergestellten Filmen signifikant erhöht werden. Durch die vorhandene …

    bayreuth Repository record for Modifizierung und Prozessierung des rekombinanten Spinnenseidenproteins eADF4(C16) zur Steuerung der Interaktion zwischen Zellen und Seidenfilmen (opens in a new tab)

  7. INJECTION MOLDING OF MICRO-FEATURES

    … solidification behavior of molten polymer at the micro scale is not well understood. Therefore, the purpose of this study is to understand the formation of micro-structure on a polymer surface and derive a range of robust solutions for injection molding of these micro-featured surfaces. This study …

    clemson Repository record for INJECTION MOLDING OF MICRO-FEATURES (opens in a new tab)

  8. Rapid production of polymer microstructures

    … module, with which difficult-to-emboss polymer microstructures and microparts can be fabricated in a cost-effective manner. In particular, the research addresses three major limitations of the hot embossing process, namely, long cycle time, difficulty in producing shell patterns, and difficulty …

    gatech Repository record for Rapid production of polymer microstructures (opens in a new tab)

  9. Development of a hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass

    … process integrating thermally-assisted micromolding and micro-drawing has been developed for producing BMG surgical-grade knife blade cutting edges with edge radii <25 nm. A hybrid process testbed was designed and used to successfully run tests over a range of the key process variables. …

    uiuc Repository record for Development of a hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass (opens in a new tab)

  10. Uv-liga Compatible Electroformed Nano-structured Materials For Micro Mechanical Systems

    UV-LIGA is a microfabrication process realzed by material deposition through microfabricated molds. UV photolithography is conducted to pattern precise thick micro molds using UV light sensitive materials, mostly SU-8, and electroforming is performed to fabricate micro metallic structures defined …

    ucf Repository record for Uv-liga Compatible Electroformed Nano-structured Materials For Micro Mechanical Systems (opens in a new tab)