Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"micro-combustion"”.
-
Investigation of the effects of preheating on the characteristics of micro combustion
… miniature mechanical devices, such as laptops, micro robots or micro aerial vehicles, has led to research on ultra micro gas turbine (UMGT). The ultra micro gas turbine is one of the most promising power sources for small scale applications due to its higher power and energy densities compared …
-
Flat Plate Boundary Layer Flows Over Catalytic Surfaces for Micro-Combustion Applications
… of intermediate Reynolds numbers that pertain to micro-combustion applications. Methane-air and propane-air mixtures were burnt catalytically at varying, close-to-stoichiometric equivalence ratios. The emphasis was on detecting combustion features that differentiate this flow from similar flows …
-
Semi-micro combustion, solvent extraction, and oleic acid adsorption of synthetic drying oils : part II.
… synthetic drying oil films were studied by semi-micro analytical methods. This thesis consists of three phases: I. Ultimate analysis to determine the oxygen content of a film at specific time intervals. II. Extraction of the films to determine their solvent solubility as a function of time. III. …
-
The Effects of Liquid Alkane Fuel Structure on Catalyst-Enhanced Combustion
The U.S. Army is developing micro-combustors for use in soldier-portable power generation systems. Many of the challenges associated with micro-combustion can be potentially overcome using a catalyst, but the effects of the catalyst on ignition under the low temperature, atmospheric conditions seen …
-
The Role of Furan Moieties on the Thermal Decomposition and Char Formation of Intrinsically Fire-Resistant Epoxy Thermosets for Composites
… attributes was linked to flammability using micro-combustion calorimetry. FRPCs were prepared and tested using cone calorimetry and appropriate ASTM standards to demonstrate the intrinsic fire protection offered by FDEs. The results of this research lay the groundwork for designing …
-
Effects of Multiwall Carbon Nanotubes on the Mechanical Properties of Carbon-Reinforced Cyanate ester Composites
… entangled nanoparticles. Transmission electron microscopy (TEM) was performed to evaluate separation of MWCNT entanglements. Carbon fiber-reinforced nanomodified cyanate ester composite panels were manufactured using a wet layup process followed by compression molding. Mechanical tests were then …
-
Numerical investigation of model combustors for efficiency improvement and miniature applications
Non-premixed combustion process is an important subject in most applications of combustion. Understanding of this phenomenon is crucial in the design of reliable, efficient, economical power generation systems. Microfabrication technologies in the development of power micro electro-mechanical …
-
Fires in Narrow Construction Cavities : Fire Dynamics and Material Fire Performance
… and numerically. Thermogravimetric analysis and micro combustion calorimetry were used to characterize the thermal decomposition of the stone wool’s organic content. A numerical heat conduction model was developed and showed capability of reproducing the temperatures inside stone wool with …
-
Characterizing premixed syngas combustion in micro-channels
… devices such as unmanned aerial vehicles (UAV), microsatellite thrusters, micro-chemical reactors and sensors calls for fuels with high specific energy and low emissions to meet the current demand of green energy. Fuel-lean synthesis gas (syngas) meets both these requirements exhibiting a …
-
A multi-scale approach for predicting the fire response of building barriers
… The characterization of stone wool properties at micro-scale is conducted with thermogravimetric analysis, micro combustion calorimetry and bomb calorimetry. The thermal conductivity of stone wool is obtained with modified slug calorimetry. At a composite scale samples are exposed to different …
-
Flame Retardant Effect of Ionic Liquid Capsules on Emulsion Paint
… the potential to encapsulate IL within silica microcapsules using sol-gel chemistry in order to avoid demulsification, while the FR properties of IL will be drawn upon during a combustion scenario as capsules break in high temperatures. The products are characterized by techniques including …
-
Functional nanocomposite fibers through electrospinning : flame retardant and superhydrophobic
… nanocomposite fibers was characterized by Micro-combustion calorimeter (MCC), a small-scale test to screen flammability of polymer materials. The MCC results show that the nano-fillers in both bulk and fiber form could effectively improve flame retardant properties of the material. …
-
Computational Analysis of the Stability Limits of Premixed Methane-air Combustion in Micro-channels
… facilitated the development of integrated microsystem devices, including electrical and mechanical components for micro-electro-mechanical systems (MEMS). Such systems necessitate an external power supply, but typical batteries yet have some unavoidable limitations. To address this problem, …
-
Design and Analysis of a Low Temperature Co-Fired Ceramic Micro Combustor
… of a Low Temperature Co-Fired Ceramic (LTCC) micro combustion system. The design of the combustor requires a detailed analysis of the flame’s operational properties and stability. To this end, an analytic model was created to address these concerns. These results were used in conjunction with …
-
Combustion and direct energy conversion in a micro-combustor
… devices and the resulting need for micro-power generation (milliwatts to watts) with low-weight, long-life devices has led to the recent development of the field of micro-scale combustion. Since batteries have low specific energy (~200 kJ/kg) and liquid hydrocarbon fuels have a very …
-
Tailoring PA6 Properties with In-Situ Generated Nanofibrils
… oxygen index (LOI) of 33.8%. Rheological, micro-combustion calorimetry and char residue analyses indicate that the entangled PPS fibril network effectively suppresses flame propagation and dripping, leading to a 17% reduction in peak heat release rate (PHRR). This synergistic effect between …
-
Environmentally-benign Flame Retardant Nanocoating for Foam and Fabric
… for the purpose of inhibiting or suppressing the combustion cycle. Inspiration for first applying polymer/clay thin films (i.e., nanobrick walls) as flame retardant (FR) coatings to polyurethane foam via LbL came from the final stage of a proposed flame suppression mechanism in a melt-mixture of …
-
Layer-by-Layer Nanocoatings with Flame Retardant and Oxygen Barrier Properties: Moving Toward Renewable Systems
… while uncoated cotton was completely destroyed. Micro combustion calorimetry confirmed that coated fabrics exhibited a reduced peak heat release rate, by as much as 20% relative to the uncoated control. Even so, this treatment would not pass the standard UL94 vertical flame test, necessitating a …
-
Development and experimental analysis of a micro-flame ionization detector for portable gas chromatographs
A portable micro-FID has been developed that utilized a diffusion flame encased in a micro-fabricated SOI structure. The micro-flame was fueled by a portable electrolyzer that provided the hydrogen and oxygen flow rates necessary for the device operation. The micro-FID was able to detect organic …
Page 1 of 2