Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 114 for “"microalloyed"”.
-
Fatigue of microalloyed bar steels
Includes bibliographical references (pages 119-123).
-
Bake hardenability of microalloyed ULC steels
Includes bibliographical references (pages 242-249).
-
Kinetics of Carbonitride Precipitation in Microalloyed Steels
… containing low levels of Ti, Nb, C and N. The microalloyed steels were solution treated at 1390°C for 2 hr and quenched, and then aged at 1000°C and 1100ºC for various times.</p> <p>The precipitates, mostly with spherical shapes for short aging times and polyhedral and cubic shapes for long …
-
THERMOMECHANICAL PROCESSING OF MICROALLOYED STEELS: EXPERIMENTS AND MODELLING
… thermomechanical controlled processing (TMCP) of microalloyed steels. In-depth understanding of these phenomena is indeed needed. In this work, the individual components and some of the potential mutual interactions have been investigated deliberately. The effect of alloying elements of Mn, Si, …
-
Low Temperature Cleavage Fracture of Microalloyed Bainitic Plate Steels
… was investigated using four experimental microalloyed bainitic plate steels. The four plate samples were produced by different thermomechanical processing (TMP) schedules and had yield strengths in the range 540 - 670 MPa. Microstructures were characterized by optical microscopy (OM), …
-
Dual-phase microalloyed steels: temperature and cooling rate effects
Includes bibliographical references (pages 173-175).
-
NbC and TiN precipitation in continuously cast microalloyed steels
… yield strength, toughness and good weldability, microalloyed steels are widely used in the automotive, pipeline and transportation industries. Microalloying elements such as niobium (Nb), titanium (Ti) and vanadium (V) in concentrations of less than 0.1 wt. pct. are typical. For optimal benefits …
-
Microstructural Evolution of a Multiphase Steel Microalloyed with Vanadium
… intercritical annealing of a multiphase steel microalloyed with vanadium was undertaken. Steels samples of a base composition and two vanadium (0.06% and 0.12%) microalloyed multiphase steels were supplied by Corns at the end of the commercial production route, from two different hot mill …
-
Thermodynamics of Microalloyed Austenites and Nonstoichiometric Carbides and Nitrides
… understanding of the precipitation behaviour in microalloyed steels has been investigated in this study. A dynamic gas equilibration technique has been used in the experimental investigation of the thermodynamics of ternary austenites and binary carbides of Ti and Nb. The results obtained in this …
-
Bauschinger effect in Nb and V microalloyed line pipe steels
… this project the microstructure of two Nb- and V-microalloyed steels has been studied with optical, scanning and transmission electron microscopy. The dislocation density and (Ti,Nb,V,Cu)-rich particle diameter, volume fraction and number density were measured for as-rolled and annealed (30 min. …
-
Microstructural and performance optimization of microalloyed bar and forging steels
Includes bibliographical references.
-
Thermomechanical processing of microalloyed bar steels for induction hardened components
Thermomechanical processing (TMP) of microalloyed steels has been shown to produce refined microstructures by austenite grain boundary pinning and elevation of the austenite no-recrystallization temperature. This project investigated the effects of chemical composition (specifically, Al, V, and …
-
Microstructural evolution of austenite in a microalloyed Fe30% Ni alloy.
The study of the physical metallurgy of microalloyed steels has been an important field of research for nearly forty years. During this time the hot working characteristics have been comprehensively investigated, simulated and modelled. Unfortunately, the actual microstructural behaviour during hot …
-
On the Design of Microstructures in Low Carbon Microalloyed Steels
Low C (<0.2 wt.%), Mo-based microalloyed steels with soft ferritic microstructures are widely used in the automobile sector due to their excellent stretch-formability. Microstructure engineering through advanced thermomechanical processing (a-TMP) is required to achieve high yield strength in these …
-
MODELING THE MICROSTRUCTURE EVOLUTION DURING HOT DEFORMATION OF MICROALLOYED STEELS
… recrystallized grains during hot rolling of Nb microalloyed austenite. Key feature of recrystallization model is detailed description of the nucleation process; the model predicts recrystallization incubation time as well as time evolution of recrystallization nucleation rate along with …
-
Austenite decomposition during hot strip rolling of microalloyed low carbon steel
… kinetics during continuous cooling of two microalloyed low-carbon steels have been investigated. Austenite grain growth, deformation and austenite decomposition tests were performed using a Gleeble 3500 thermomechanical simulator. The influence of processing parameters including austenite …
-
Fatigue and mechanical properties of microalloyed spring steels for automotive suspensions
Includes bibliographical references (pages 79-81).
-
Determination of the non-recrystallization temperature (TNR) in multiple microalloyed steels
… plan rolling schedules for desired properties. Microalloyed steels have small additions of alloying elements such as V, Ti, and Nb, to improve mechanical properties through grain size control and precipitation strengthening. The value of TNR is based on both alloying elements and deformation …
-
Double-twist torsion testing to assess microstructural evolution in microalloyed steels
… nominal base composition and to five additional microalloyed steels with varying Nb, Ti, V, C, and N contents using a Gleeble® 3500. All alloys contained Nb additions between 0.03 and 0.06 wt pct. Partial softening occurred over an approximate 100 ˚C temperature range suggesting a similar range …
Page 1 of 6