Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1016 for “"microfabrication"”.
-
Unconventional Microfabrication Using Polymers
Current microfabrication materials include silicon, a wide variety of metals, dielectrics, and some polymers. Because of the low cost and high processing flexibility that polymers generally have, expanding the use of polymers in microfabrication would benefit the microfabrication community, …
-
Three Dimensional Microfabrication and Micromoulding
A novel process for fabricating 3D micron-scale structures based on Rapid Prototyping (RP) principles of layer-by-layered with micrmoulds via vacuum casting / electrodeposition processes was performed. The process consists of photomask preparing and excimer laser lithography and vacuum casting / …
-
Volumetric Microfabrication with Structured Light
Multiphoton polymerization (MPP) as one of the direct laser writing techniques is capable of manufacturing three-dimensional (3D) micro-structures with complex shapes and novel functionalities. However, current MPP methods rely on point-by-point or layer-by-layer scanning and therefore are …
-
Lightweight Structures Enabled By Microfabrication
… strong or stiff. The recent advancements in microfabrication have allowed the manufacture of structures with unprecedented properties. In this work, three strategies of achieving lightweight structures are explored: (1) hollowing, (2) folding, and (3) lightweight composites. The first …
-
3D microfabrication of biological machines
… has brought about a new discipline: using microfabrication technologies to forward engineer biological machines and systems capable of complex functional behavior. By introducing a new set of “building blocks” into the engineer’s toolbox, this new era of design and manufacturing promises to …
-
Nonlinear laser microfabrication in biological environments
… the development of methodologies for laser-based microfabrication in biological environments. These techniques use pulsed laser light at a wavelength transparent to the experimental medium except in a region with submicron dimensions defined by the focus of a high numerical aperture objective. At …
-
A Microfabrication Approach to Multicellular Mechanics
To address the question of how cell-generated forces regulate the organization and function of endothelial cells, I investigated the mechanical forces in a simple model of cell-cell contact: paired cells contacting each other via a single cell-cell junction. To study the responsiveness of AJs to …
-
Applications of Microfabrication in Biosensor Technology
This thesis investigates the application of microfabrication techniques in biotechnology, embracing two major methodologies: biosensing and dielectrophoresis. In the first instance, the miniaturisation of biosensors for use in aqueous solutions was explored, focusing on the issues of insulator …
-
Application of microfabrication in electrochemical sensing.
In this work, micro fabrication techniques are explored not only to simplify the production of complex lab on-a-chip devices (LOC), but also micro fabrication will be utilized to create intelligent design features that will enhance an electrochemical sensor's capabilities. First, a low temperature …
-
Microfabrication of SiC Using Femtosecond Lasers
Silicon carbide (SiC) is a desirable material in a wide variety of semiconductor fields. The impressive thermal, chemical, and mechanical properties that make SiC an attractive material also make it very difficult to machine. New fabrication techniques are required to take full advantage of the …
-
Microfabrication of an intraocular pressure sensor
Thesis (M.S.)--Michigan State University. Department of Electrical and Computer Engineering, 2005
-
Computational design and microfabrication of photonic quasicrystals
<p>Photonic crystals are attracting much interest due to their ability to inhibit spontaneous emission of light. This and related properties arise from the formation of photonic bandgaps, whereby multiple scattering of light by lattices of periodically varying refractive indices act to prevent the …
-
Computational design and microfabrication of photonic crystals
<p>Photonic crystals are artificial dielectric lattice structures which may be periodic in up to three dimensions. These strongly diffractive structures interact with electromagnetic radiation in such a way that radiation becomes quantized into discrete energy bands. This results in an optical …
-
MICROFABRICATION AND MODELLING OF DIELECTRIC ELASTOMER ACTUATORS
Dielectric elastomer actuators (DEAs) are a class of polymeric actuators that have gained prominence over the last decade. A DEA is comprised of a polymer sandwiched between two compliant electrodes. When voltage is applied between the two electrodes, electrostatic attraction between the electrodes …
-
Electrochemical materials and microfabrication for sensor devices
An electrochemical sensor is an analytical chemistry device that can quantitatively detect the concentration of a target analyte by oxidising or reducing the analyte and measuring the resulting current. These versatile sensors can offer rapid, real-time, sensitive, selective and cost-effective …
-
Advanced Techniques for Carbon Nanotube Templated Microfabrication
Carbon nanotube templated microfabrication (CNT-M) is a term describing a grouping of processes where carbon nanotubes (CNTs) serve a structural role in the fabrication of a material or device. In its basic form, CNT-M is comprised of two steps: produce a template made from carbon nanotubes and …
-
Microfabrication technologies for single-crystal silicon sensors
For decades, silicon as a high quality solid material has been playing a major role in developing state-of-the-art micromechanical sensors. In this work, the performance of silicon etching processes is evaluated, and utilized in creating devices for high precision sensing of mechanical forces. …
Page 1 of 51