Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 81 for “"microindentation"”.

  1. Microindentation for Characterization of Interactions in Liquid Metal Composites

    … and anisotropic mechanical properties. Microindentation is a material characterization technique that can be used to study the micron-scale droplet-droplet interactions between the inclusions in these composites. Because most microindentation systems are incapable of producing …

    vt Repository record for Microindentation for Characterization of Interactions in Liquid Metal Composites (opens in a new tab)

  2. Microindentation Creep of Calcium-Silicate-Hydrate and Secondary Hydrated Cement Systems

    … briefly as follows: 1. It was determined that microindentation is a useful method for determining the creep behavior of C-S-H of various stoichiometries, 1.4 tobermorite, jennite, and ettringite. 2. Microindentation parameters i.e. creep modulus, indentation modulus and indentation hardness are …

    ottawa-retro Repository record for Microindentation Creep of Calcium-Silicate-Hydrate and Secondary Hydrated Cement Systems (opens in a new tab)

  3. HIGH THROUGHPUT MECHANICAL PROPERTY CHARACTERIZATION OF STRUCTURAL ALLOYS USING SPHERICAL MICROINDENTATION

    Spherical indentation has been shown to be a reliable high throughput alternative to capture the complete elastic-plastic response of polycrystalline metal alloys when using the Pathak-Kalidindi (P-K) protocol. However, yielding initiates subsurface and due to the hydrostatic pressure associated …

    gatech Repository record for HIGH THROUGHPUT MECHANICAL PROPERTY CHARACTERIZATION OF STRUCTURAL ALLOYS USING SPHERICAL MICROINDENTATION (opens in a new tab)

  4. A biomechanical approach to improved fracture risk assessment with a focus on reference point microindentation

    … these can be measured through Reference Point Microindentation (RPI). RPI has previously been applied in vivo with no reported complications and the hypothesis that a higher indentation depth of a needle-like test probe implies increased fracture risk. Despite emerging implementation of RPI, …

    soton Download PDF for A biomechanical approach to improved fracture risk assessment with a focus on reference point microindentation (opens in a new tab)

  5. Numerical simulation of a load-based microindentation technique for nde on thermal barrier coating systems

    The durability and life-cycle of thermal barrier coatings (TBC) applied to gas turbine blades and combustor components limits the maximum temperature and subsequent efficiency at which gas turbine engines operate. The development of new materials, coating technologies and evaluation techniques is …

    wvu Repository record for Numerical simulation of a load-based microindentation technique for nde on thermal barrier coating systems (opens in a new tab)

  6. Characterization of Material’s Elastic-plastic Properties Through Microindentation Testing with a Cylindrical Flat-tip Indenter

    … developed based on finite element analysis for microindentation. Software used in modeling is ANSYS14.5 and an axisymmetric model is built. The experimental microindentation is compared with the computer model. By using cylindrical microindentation the elastic-plastic properties of the materials …

    sdstate Repository record for Characterization of Material’s Elastic-plastic Properties Through Microindentation Testing with a Cylindrical Flat-tip Indenter (opens in a new tab)

  7. Adaptation Of The Biodent For Spherical Microindentation To Determine Elastic Modulus In Small Rodent Bones

    … and the progression of bone-related diseases. Microindentation has become a widely used method for evaluating tissue mechanical properties of bone, as it samples the contributions of microarchitecture and composition. Microindentation using a standard pointed tip inherently introduces both …

    cuny Repository record for Adaptation Of The Biodent For Spherical Microindentation To Determine Elastic Modulus In Small Rodent Bones (opens in a new tab)

  8. Achieving More Accurate Microindentation Hardness Measurements of Shale Rocks -- Insight into the Effect of Sink-in and Pile-up

    … shales as the model systems, using Vickers microindentation coupled with confocal microscopy. The use of confocal microscopy facilitates the direct observation of indent impressions, overcoming the challenges posed by the complex contrasts of shales seen in traditional optical microscopy. …

    tamu Repository record for Achieving More Accurate Microindentation Hardness Measurements of Shale Rocks -- Insight into the Effect of Sink-in and Pile-up (opens in a new tab)

  9. The use of microindentation techniques for the determination of the hardness and elastic modulus of thin films and surface layers on ceramic substrates

    … and surface layers has prompted investigation of microindentation techniques for determination of these properties. In this study, an ultralow load depth-sensing microindentation system was used to measure hardness and elastic modulus as a function of indenter displacement for several different …

    ut-knoxville Repository record for The use of microindentation techniques for the determination of the hardness and elastic modulus of thin films and surface layers on ceramic substrates (opens in a new tab)

  10. Multiscale Mechanical Characterization Of The Bakken Formation

    … atomic force microscopy, nanoindentation/microindentation, triaxial compressive tests with computational calculations including micromechanical modeling, machine learning techniques were used. In this research, the objectives are to characterize the mechanical properties of the Bakken …

    nodak Repository record for Multiscale Mechanical Characterization Of The Bakken Formation (opens in a new tab)

  11. Avaliação do envelhecimento do poli (fluoreto de vinilideno) (PVDF) visando aplicações em estruturas para contato com etanol combustível

    … subjected to heated ethanol. The instrumented microindentation (micro-TII) tests show that the instrumented elastic modulus (EIT) increased with increasing of the loading rate and decreased with increasing of the maximum load. After aging in ethanol, the EIT and the microindentation (HIT) were …

    brazil-uerj Repository record for Avaliação do envelhecimento do poli (fluoreto de vinilideno) (PVDF) visando aplicações em estruturas para contato com etanol combustível (opens in a new tab)

  12. The Relationship between Microstructure and Fracture Toughness of Thermal Spray Coatings

    … accurate results, when compared with SEVNB and microindentation, for Si-rich and HfO2-rich single phases as well as the composite microstructure of the Cr3C2-NiCr coating. Microcantilevers, on the other hand, proved more difficult to implement as specimens suffered from modeling difficulties …

    houston Repository record for The Relationship between Microstructure and Fracture Toughness of Thermal Spray Coatings (opens in a new tab)

  13. Photo-click Chemistry: Fabrication of Photo-thermoresponsive Materials for Advanced Applications

    … information for digital information storage. Microindentation analysis was essential for the characterization of the soft material system. This methodology opens a route to the fabrication of soft materials with patterned mechanical properties and addresses important emerging challenges not …

    bristol Repository record for Photo-click Chemistry: Fabrication of Photo-thermoresponsive Materials for Advanced Applications (opens in a new tab) Download PDF for Photo-click Chemistry: Fabrication of Photo-thermoresponsive Materials for Advanced Applications (opens in a new tab)

  14. A Study of Material Properties and Relevant Microstructure Parameters that May Influence the V<sub>50</sub> Ballistic Limit Velocity of Composite Ceramics

    … was performed to obtain material density, microindentation hardness, and flexural strength. Ceramography analysis of the material was also carried out to characterize the microstructure for each material.</p> <p>Results showed that the ranges in these properties of the ceramic materials …

    ut-knoxville Repository record for A Study of Material Properties and Relevant Microstructure Parameters that May Influence the V<sub>50</sub> Ballistic Limit Velocity of Composite Ceramics (opens in a new tab)

  15. FORECAST VALIDITY OF ALUMINUM AND STEEL MECHANICAL PROPERTY TRENDS BASED UPON MICROHARDNESS BEHAVIOR

    … and elastic modulus, were compared to studied microindentation software, which quantifies the relationship of indentation results to the actual tested mechanical changes. Modeling linear relationships for metal lifetime forecasts from hardness has been solidified by this study. Outcomes can be …

    nps Repository record for FORECAST VALIDITY OF ALUMINUM AND STEEL MECHANICAL PROPERTY TRENDS BASED UPON MICROHARDNESS BEHAVIOR (opens in a new tab)

  16. Preparation, microstructure and properties of silicon carbide-dysprosia composites

    … point, single-edge notched beam test and by the microindentation methods.

    uiuc Repository record for Preparation, microstructure and properties of silicon carbide-dysprosia composites (opens in a new tab)

  17. Micromechanical Properties of the Extracellular and Pericellular Matrices of Articular Cartilage

    … (AFM) provides a means for high resolution microindentation testing that can be used to measure local mechanical properties in situ. This dissertation develops and applies AFM microindentation techniques to 1) evaluate the microscale elastic properties of the cartilage PCM and ECM in situ …

    duke Repository record for Micromechanical Properties of the Extracellular and Pericellular Matrices of Articular Cartilage (opens in a new tab)

  18. Computational modeling of indentation of materials

    … different indentation problems involving the microindentation, nanoindentation and reference point indentation (RPI). The goal of this thesis is to develop better understanding of indentation processes in different materials utilizing numerical methods. Indentation has been used for a long …

    uiuc Repository record for Computational modeling of indentation of materials (opens in a new tab)

  19. Effects of precipitate size and surface normal orientation on micro-identification and compressive fatigue of NiTi shape memory alloys

    … temperatures. Through instrumented sharp microindentation and cyclic compression testing, the varying mechanical response of the NITI materials given different aging treatments was determined. Small precipitate sizes were found to strongly resist dislocation motion and the martensitic …

    nps Repository record for Effects of precipitate size and surface normal orientation on micro-identification and compressive fatigue of NiTi shape memory alloys (opens in a new tab)

Page 1 of 5