Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 50 for “"micromanipulator"”.

  1. MICROMANIPULATOR-RESONATOR SYSTEM FOR SELECTIVE WEIGHING OF INDIVIDUAL MICROPARTICLES

    Over the past decade, MEMS-based cantilever sensors have been widely used in the detection of biomolecules, environmental pollutants, chemicals and pathogens. Cantilever-based sensors rely on attachment of target entities on their surface. The attachment causes either change in surface stress or …

    purdue-thes Repository record for MICROMANIPULATOR-RESONATOR SYSTEM FOR SELECTIVE WEIGHING OF INDIVIDUAL MICROPARTICLES (opens in a new tab)

  2. Cooperative Manipulation using a Magnetically Navigated Microrobot and a Micromanipulator

    … navigated microrobot (MNM) and a motorized micromanipulator (MM). The MNM is a small cylinder permanent magnet with 10mm diameter and 10mm height. The MM model is MP-285 which is a commercialized product. Here, the MNM is remotely controlled by an external magnetic field. The property of …

    waterloo Repository record for Cooperative Manipulation using a Magnetically Navigated Microrobot and a Micromanipulator (opens in a new tab)

  3. Design, Optimization, and Experimental Characterization of a Novel Magnetically Actuated Finger Micromanipulator

    … of external magnetic fields to precisely control micromanipulator systems has received a great deal of attention from researchers in recent years due to its off-board power source. As these micromanipulators provide frictionless motion, and precise motion control, they have promising potential …

    waterloo Repository record for Design, Optimization, and Experimental Characterization of a Novel Magnetically Actuated Finger Micromanipulator (opens in a new tab)

  4. A characterization of micromanipulator controlled dry spinning of micro- and nanoscale polymer fibers.

    No current microfabrication technique exists for producing room-temperature, high-precision, point-to-point polymer nanofibers in three dimensions. Producing rounded structures in a third dimension is particularly difficult to accomplish with conventional planar microfabrication techniques. …

    louisville Repository record for A characterization of micromanipulator controlled dry spinning of micro- and nanoscale polymer fibers. (opens in a new tab)

  5. Die Genauigkeit der menschlichen Hand im Vergleich mit einem Mikromanipulator- präklinische Evaluation für die Ohrchirurgie

    … at an unergonomic position. At this point a micromanipulator could have a positive influence. A system was developed to measure “working accuracy”, time and precision during manipulation in the middle ear. 10 ENT- surgeons simulated a perforation of the stapedial footplate on a modified 3D …

    qucosa-diss

  6. Analysis and Design of Surface Micromachined Micromanipulators for Out-of-Plane Micropositioning

    … the XZ Micropositioning Mechanism and the XYZ Micromanipulator. The displacement and force relationships are presented. The devices were fabricated using surface micromachining processes and the resulting mechanisms were tested. A compliant XYZ Micromanipulator was also designed to reduce …

    byu Repository record for Analysis and Design of Surface Micromachined Micromanipulators for Out-of-Plane Micropositioning (opens in a new tab) Download PDF for Analysis and Design of Surface Micromachined Micromanipulators for Out-of-Plane Micropositioning (opens in a new tab)

  7. Design and optimization of a macro-micro manipulator featuring a 3-UPS compliant parallel mechanism

    … one rotational DOF around the z-axis while the micromanipulator is a 3-UPS compliant parallel mechanism with an orthogonal structure of 3 translational DOFs. The work in the thesis covers structural design of the macro-micro manipulator, kinematic modeling and inverse kinematic analysis, …

    uoit Repository record for Design and optimization of a macro-micro manipulator featuring a 3-UPS compliant parallel mechanism (opens in a new tab)

  8. Modelling Hearing Impairment After Ossicular Manipulation and Reducing This Injury

    … manipulation: one with direct coupling to a micromanipulator, the other with burr contact to the incudomalleal complex, and assessed electrocochleography (ECochG) outcomes. We then extended this acute model to a recovery model to investigate whether a single intravenous dose of dexamethasone …

    auckland-ms Repository record for Modelling Hearing Impairment After Ossicular Manipulation and Reducing This Injury (opens in a new tab)

  9. The use of Positron Emission Particle Tracking (PEPT) to determine the grinding mechanisms within a vertically stirred media mill

    … carbonate strength measurements made using the micromanipulator to determine the percentage of the grinding media with sufficient stress to overcome the strength of the calcium carbonate particle. The collision frequency and total number of collisions were estimated using a modified Arrhenius …

    birmingham Download PDF for The use of Positron Emission Particle Tracking (PEPT) to determine the grinding mechanisms within a vertically stirred media mill (opens in a new tab)

  10. Basic Study Of Micromachined Dep (dielectrophoretic) Manipulator

    … electrode geometries and medium conductivity. A micromanipulator for latex bead separation was designed, fabricated and characterized. For the development of DEP manipulator, the fabrication and packaging of microfluidic structure with the microelectrode is crucial for reliable analysis. A …

    ucf Repository record for Basic Study Of Micromachined Dep (dielectrophoretic) Manipulator (opens in a new tab)

  11. MICROFLUIDIC DEVICE FOR MICROINJECTION OF CAENORHABDITIS ELEGANS

    … it requirements such as expensive multi DOF micromanipulator, detailed injection alignment procedure and skilled operator which makes the microinjection process slow and not suitable for scale to high throughput. Although many microfabricated microinjectors exist, none of them are capable of …

    mcmaster Repository record for MICROFLUIDIC DEVICE FOR MICROINJECTION OF CAENORHABDITIS ELEGANS (opens in a new tab)

  12. Fabrication and measurement of graphene devices

    … mesas of graphene and hexagonal boron nitride a micromanipulator workstation and simple UV microscope were constructed.

    lancaster Download PDF for Fabrication and measurement of graphene devices (opens in a new tab)

  13. Bio-Inspired Material Surfaces with Self-cleaning, Micromanipulation and Water Collection

    … achieved, which was designed into a bio-inspired micromanipulator with a success rate over 90%. When electrical bias was applied on this biomimetic surface, the charge concentration induced an electrical double layer (ELD) on the convex surfaces, which attracts polar water molecules to form a …

    unt Repository record for Bio-Inspired Material Surfaces with Self-cleaning, Micromanipulation and Water Collection (opens in a new tab)

  14. The Effect of Embryo Biopsy and Vitrification on the Development Potential of Equine Embryos

    … group underwent microaspiration biopsy using a micromanipulator to obtain a small tissue sample from the embryo. Both groups were then vitrified using a commercially available technique originally described by Carnevale (2006) at Colorado State \ University. All 20 embryos were cultured in …

    calpoly Repository record for The Effect of Embryo Biopsy and Vitrification on the Development Potential of Equine Embryos (opens in a new tab)

  15. Force sensing enhancement of robot system

    … to enhance a robot system. The force sensor, the micromanipulator and the electronic control unit, were all designed and manufactured at the robotic centre of Middlesex Polytechnic. The force feedback is provided by means of strain gauges and the associated bridge circuitry. Control algorithms …

    middlesex Download PDF for Force sensing enhancement of robot system (opens in a new tab)

  16. A Versatile fabrication platform for the exploration of new electronic materials and device structures

    … aid of a focused ion beam (FIB) and integrated micromanipulator system. This requires real-time shaping, cutting, accurate positioning (circa 100 nm precision) and wiring of the graphite top electrode. Electron transport characteristics of each electrode component and the final heterostructure …

    uvic Repository record for A Versatile fabrication platform for the exploration of new electronic materials and device structures (opens in a new tab)

  17. Improved Computer Vision Algorithms for High-Throughput Targeting of Single Cells in Intact Tissue for Automated Microinjections

    … injections. The system guides a robotic micromanipulator to these cells and attempts injections while another computer vision algorithm and Kalman filter are used to improve the robot’s positioning accuracy. Additionally, cell impalement and cell filling detection algorithms were …

    umn Repository record for Improved Computer Vision Algorithms for High-Throughput Targeting of Single Cells in Intact Tissue for Automated Microinjections (opens in a new tab)

  18. Some effects of the degeneration of the perivascular nerve plexus in Rana pipiens.

    … developed micro-electrode (Fulton, 1941) and a micromanipulator. Adrenalin was administered by means of the microinjection apparatus of the Emerson micromanipulator. Dilutions of Parke-Davis adrenalin of 1:4xl06 to 1:1x103 were used. At the conclusion of the physiological testing the …

    bu Repository record for Some effects of the degeneration of the perivascular nerve plexus in Rana pipiens. (opens in a new tab)

  19. The effect of biological and anthropogenic sound playbacks and self-generated movement on the hearing sensitivity of the Oyster Toadfish, Opsanus tau

    … of free-swimming toadfish using an implantable micromanipulator. Experiments measured the neural response of the utricle to playbacks of conspecific vocalizations at variable speeds while swimming. During movement, fish remained sensitive to conspecific playbacks, indicating that the inner ear …

    umn Repository record for The effect of biological and anthropogenic sound playbacks and self-generated movement on the hearing sensitivity of the Oyster Toadfish, Opsanus tau (opens in a new tab)

  20. Uncalibrated Visual Servoing in Automation of Robotic Systems

    … the Mosquito Dissector, a high-precision micromanipulator, and the Robotic Screwdriver, a manipulator operating at macro scale. The automatic calibration of the Mosquito Dissector is employed to verify the 3D positioning performance of the proposed approach within a sub-millimeter scale, …

    jhu Repository record for Uncalibrated Visual Servoing in Automation of Robotic Systems (opens in a new tab)

Page 1 of 3