Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 71 for “"micromechanical models"”.

  1. Three-dimensional micromechanical models of textile fabrics

    … three basic modelling scales were developed: the micromechanical modelling of yarns, the mesomechanical modelling of the fabric unit cell and the macromechanical modelling of the fabric sheet. In the stage of the micromechanical modelling the typical yarn structure was studied in the fibre level. …

    greece Repository record for Three-dimensional micromechanical models of textile fabrics (opens in a new tab)

  2. Micromechanical models of delamination in aluminum-lithium alloys

    … different theories of hardening. The microscale models reveal soft/stiff grain boundaries develop elevated mean stress and plastic strain as a consequence of the mechanics of the interface. These elevated stresses and strain drive plastic void growth. The results indicate plastic void growth …

    uiuc Repository record for Micromechanical models of delamination in aluminum-lithium alloys (opens in a new tab)

  3. Simplified micromechanical models for analysis of interface debonding in a fibrous composite

    … objective of this study is to develop simplified micromechanical models to analyze the interface debonding between fiber and the matrix materials. Both analytical and simplified finite element models are used to predict the effective transverse elastic modules of fibrous composites with a partial …

    nps Repository record for Simplified micromechanical models for analysis of interface debonding in a fibrous composite (opens in a new tab)

  4. A micromechanical investigation of biomimetic composites: experimental characterization and three-dimensional computational modeling

    … of biomimetic composites using 3D finite element micromechanical modeling. (ii) Make a 3D-printable nanocomposite ink comprised of a plant oil-based polymer and nanoparticles for bone-mimetic applications. (iii) 3D printing nanocomposite filaments having staggered nanostructures and testing in …

    waterloo Repository record for A micromechanical investigation of biomimetic composites: experimental characterization and three-dimensional computational modeling (opens in a new tab)

  5. MECHANICAL MODELLING AND CHARACTERIZATION OF CLOSED-CELL METALLIC FOAMS

    … a direct approach to generate irregular 3D micromechanical models, adequately characterizing the geometrical characteristics, is presented. The generated micromechanical models can well predict the macroscopic behaviour of closed-cell aluminium foams under uniaxial and hydrostatic …

    nus Repository record for MECHANICAL MODELLING AND CHARACTERIZATION OF CLOSED-CELL METALLIC FOAMS (opens in a new tab) Download file for MECHANICAL MODELLING AND CHARACTERIZATION OF CLOSED-CELL METALLIC FOAMS (opens in a new tab)

  6. Predição de propriedades mecânicas de compósitos unidirecionais através de redes neurais artificiais

    … factor in the projects preparation. Thus the micromechanical models appeared, which gained importance due to its practicality, such as the Mix Rule and the Halpin-Tsai equations. Recently, new computational models are combining micromechanical models and perfecting them to obtain maximum …

    brazil-ufrn Repository record for Predição de propriedades mecânicas de compósitos unidirecionais através de redes neurais artificiais (opens in a new tab)

  7. Numerical models for natural fibre composites with stochastic properties

    … using Weibull distribution and three statistical models were developed to relate the fibre strength/fracture strain to the fibre gauge length. Examination of tensile test data reveals that the coefficient of variation (CoV) for failure strain is consistently lower than the CoV for fracture stress …

    plymouth Repository record for Numerical models for natural fibre composites with stochastic properties (opens in a new tab)

  8. Modeling Time-dependent Responses of Piezoelectric Fiber Composite

    … square fiber cross-section. Finite element (FE) models of representative volume elements (RVEs) of active PFCs, having square and circular fiber cross-sections, are generated for composites with 20, 40, and 60 percent fiber contents. Two FE micromechanical models having one fiber embedded in …

    tamu Repository record for Modeling Time-dependent Responses of Piezoelectric Fiber Composite (opens in a new tab)

  9. Sintering mechanics of 3D printed ceramic aggregates treated with a reactive binder

    … a combination of dilatometry experiments and micromechanical modeling to explain how reactive binders affect the creep and densification behaviors in a model system – binder jet 3D printed TiO2 treated with a TiO2-forming reactive binder, aqueous titanium bis-ammonium lactato dihydroxide …

    rice Repository record for Sintering mechanics of 3D printed ceramic aggregates treated with a reactive binder (opens in a new tab)

  10. Micromechanics of strength-related phenomena in composite materials

    Micromechanical models are presented which can be used to evaluate: stress concentrations in the vicinity of single and multiple fiber fractures in unidirectional composites under axial loading; the tensile strength of unidirectional composites; fiber coatings that can be used to maximize the …

    vt Repository record for Micromechanics of strength-related phenomena in composite materials (opens in a new tab)

  11. Axial, flexural and torsional rigidities of two-dimensional braided fibre composite medical catheters

    … values of Efl1, E m and Gm are required for the micromechanical model; the model is not sensitive to the remaining elastic constants (nuf12, nu f23, Gfl2, G23). Oversized braided (Kevlar 49 fibre and thermoset matrix) engineering model composite structures---or model catheters---have been used to …

    ottawa-retro Repository record for Axial, flexural and torsional rigidities of two-dimensional braided fibre composite medical catheters (opens in a new tab)

  12. Synergistic Fatigue Performance in High Entropy Alloys with Novel Precipitates and Metastable Phases

    … of the in-situ diffraction techniques and micromechanical models is used to establish the relationship between macroscopic properties and microstructural mechanisms during low cycle fatigue tests. This investigation could accelerate the engineering applications of HEAs.</p>

    utk-theses Repository record for Synergistic Fatigue Performance in High Entropy Alloys with Novel Precipitates and Metastable Phases (opens in a new tab)

  13. ROLE OF FLOCCULATION AND DISPERSION IN PELLETIZATION OF IRON ORE

    … modeling of iron ore pellet strength utilizes micromechanical models such as Rumpf’s equation, which correlate attractive forces and pellet properties into an average expected pellet strength. These models combine with repulsive forces within pellets to predict that pellet strength decreases …

    mtu Repository record for ROLE OF FLOCCULATION AND DISPERSION IN PELLETIZATION OF IRON ORE (opens in a new tab)

  14. Stress and fracture analysis for systems with inhomogeneities.

    … also be utilized to evaluate and verify various micromechanical models. The possible future extensions and the major limitations of the present work are briefly discussed in Chapter 5.

    arizona-thes Repository record for Stress and fracture analysis for systems with inhomogeneities. (opens in a new tab)

  15. Dynamics of polymeric solutions in complex kinematics bulk and free surface flows: Multiscale/Continuum simulations and experimental studies

    … to researchers in developing first principles models and simulation techniques that can accurately and robustly predict the dynamical behaviour of polymeric flows, the past two decades have offered several significant advances towards accomplishing this goal. These accomplishments include: (1). …

    utk-theses Repository record for Dynamics of polymeric solutions in complex kinematics bulk and free surface flows: Multiscale/Continuum simulations and experimental studies (opens in a new tab)

  16. Computational homogenisation of cracked composite materials using ordinary state-based peridynamics

    … stress fields, validated against analytical and micromechanical models. The results show robust capture of complex crack morphologiesand interactions while maintaining parallel efficiency. The proposed framework thus provides a general-purpose and scalable tool for peridynamic homogenisation of …

    strathclyde Repository record for Computational homogenisation of cracked composite materials using ordinary state-based peridynamics (opens in a new tab)

  17. High Energy X-Ray Diffraction Studies Of Heterogeneous Slip In Plastically Deforming Single Crystals

    … deforms is critical for the advancement of micromechanical models. In this work, new experimental X-ray diffraction techniques and analysis methods are implemented to study heterogeneous slip in deforming single crystals. An analysis method combining experimental data with simulations is …

    cornell Repository record for High Energy X-Ray Diffraction Studies Of Heterogeneous Slip In Plastically Deforming Single Crystals (opens in a new tab)

  18. Hierarchical material models with microstructure for nonlinear analysis of progressive damage in laminated composite structures

    … modeling approaches using hierarchical 3D micromechanical models for the analysis of progressive damage in laminated structures. Each approach is generally a synthesis of three components: a nonlinear material model for the matrix behavior; a micromodel for the unidirectional lamina; and a …

    uiuc Repository record for Hierarchical material models with microstructure for nonlinear analysis of progressive damage in laminated composite structures (opens in a new tab)

  19. Micromechanical Modelling of Local Failure and Ply Crack Formation in Fiber-Reinforced Plastic Laminates

    … to develop high fidelity failure prediction models for associated structures. In recent years, virtual testing techniques have been proposed as an alternative to costly experimental characterization campaigns for assessing damage of composite laminates at different length scales. Conventional …

    waterloo Repository record for Micromechanical Modelling of Local Failure and Ply Crack Formation in Fiber-Reinforced Plastic Laminates (opens in a new tab)

Page 1 of 4