Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"microstructural modification"”.

  1. Influence of temperature and microstructural modification on formability of magnesium alloys

    … understand the dependence of Mg formability on microstructural condition and temperature. Friction stir processing (FSP) was used to refine the grain size and to obtain desirable distribution of precipitates in the matrix. Since Mg alloys exhibit challenges in achieving room temperature …

    must-thes Repository record for Influence of temperature and microstructural modification on formability of magnesium alloys (opens in a new tab)

  2. Microstructural Modification in Nanocrystalline Silicon Due to Selective Charge Injection: A Current-sensing Atomic Force Microscopy Study

    The ability to deposit hydrogenated nanocrystalline silicon (nc-Si:H) on low-cost, flexible substrates over large areas makes it an attractive option for large scale production of solar cells. Nc-Si:H has also shown promise as a replacement for amorphous silicon in thin film transistors in large …

    sdstate Repository record for Microstructural Modification in Nanocrystalline Silicon Due to Selective Charge Injection: A Current-sensing Atomic Force Microscopy Study (opens in a new tab)

  3. Microstructural modification of melt spun iron alloys via high shear deformation to enhance rare-earth free magnets

    … were studied to determine the feasibility of microstructural modification through high shear deformation processing prior to nitriding. Specifically, this study was to determine if grain refinement, formation of high angle grain boundaries, and microstructure homogenization could be achieved …

    colo-mines Repository record for Microstructural modification of melt spun iron alloys via high shear deformation to enhance rare-earth free magnets (opens in a new tab)

  4. Microstructure for Enhanced Plasticity and Toughness

    … is a thermomechanical technique used to effect microstructural modification. Here, FSP was utilized to affect the toughness of WE43 sheets through microstructural modification. Room temperature Kahn-type tests were conducted to measure the toughness of WE43 sheets. Microscopic techniques (SEM, …

    unt Repository record for Microstructure for Enhanced Plasticity and Toughness (opens in a new tab)

  5. Microstructural stability and the kinetics of textural evolution

    … has been deformed and the rates at which that microstructural modification may occur. The area which has been chosen to investigate microstructural change is the Ballachulish aureole in the NW Highlands of Scotland, using samples from the Appin Quartzite. Rocks in this region were deformed …

    whiterose Download PDF for Microstructural stability and the kinetics of textural evolution (opens in a new tab)

  6. Fabrication, Processing, and Properties of Bulk Multiphase Metal Composites

    … by extrusion and underwent extensive microstructural modification, which allowed the production of composites with the three target microstructures. The responses of the unmodified composites to extrusion ranged from a complete lack of microstructural change to composite breakup. A …

    tamu Repository record for Fabrication, Processing, and Properties of Bulk Multiphase Metal Composites (opens in a new tab) Embargoed until 2028-05-01

  7. Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321

    … however this susceptibility was removed after microstructural modification by FSP. A re-sensitisation treatment of the previously sensitised and FSP’d region was seen to precipitate coarser and more discrete β-phase particles onto grain boundaries, which corroded at a faster rate than the …

    birmingham Download PDF for Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321 (opens in a new tab)

  8. Friction Stir Processing of Cobalt-Chromium-Molybdenum for Improvements in Biomedical Applications

    … (FSP) has been investigated as a means of microstructural modification aimed at improving mechanical properties such as corrosion resistance and wear resistance of biomedical-grade cobalt-chromium-molybdenum (CoCrMo) alloy. FSP was successfully completed on high-carbon ASTM F1537 CoCrMo …

    byu Repository record for Friction Stir Processing of Cobalt-Chromium-Molybdenum for Improvements in Biomedical Applications (opens in a new tab) Download PDF for Friction Stir Processing of Cobalt-Chromium-Molybdenum for Improvements in Biomedical Applications (opens in a new tab)

  9. Advanced Radiation Detection Devices: 3D Diamond Detectors and KSr2I5:Eu Scintillating Crystals

    … polycrystalline, were processed using the bulk microstructural modification technique of femtosecond-pulsed laser machining. Deep reactive ion etching of the samples revealed that the laser-treated channels etch considerably faster than the surrounding diamond. Next, to create through-diamond …

    utk-theses Repository record for Advanced Radiation Detection Devices: 3D Diamond Detectors and KSr2I5:Eu Scintillating Crystals (opens in a new tab)

  10. Stress corrosion cracking behavior of friction stir processed ultrafine grained light metal alloys

    … influence of friction stir processing (FSP), a microstructural modification tool, on the corrosion behavior of Al-Mg, Al-Mg-Sc, Mg-Al-Zn and Mg-Y-RE alloys has been studied. An attempt has been made to establish correlation between processing parameters and the subsequent microstructural …

    must-thes Repository record for Stress corrosion cracking behavior of friction stir processed ultrafine grained light metal alloys (opens in a new tab)

  11. Influence of microstructural length scale on deformation behavior of magnesium alloys

    … (FSP) is emerging as an effective tool for microstructural modification. Mg-Al-Zn alloys with different aluminum contents were subjected to FSP to achieve fine grained and ultrafine grained (UFG) structure. The objective of this work was to study the influence of microstructural length scale …

    must-thes Repository record for Influence of microstructural length scale on deformation behavior of magnesium alloys (opens in a new tab)

  12. Exceptional Properties in Friction Stir Processed Beta Titanium Alloys and an Ultra High Strength Steel

    … route had shown an excellent promise towards microstructural modification in many Al and Mg alloy systems. Nevertheless, the expansion of this process to high temperature materials like titanium alloys and steels is restricted by the limited availability of tool materials. Despite it …

    unt Repository record for Exceptional Properties in Friction Stir Processed Beta Titanium Alloys and an Ultra High Strength Steel (opens in a new tab)

  13. Caracterização da camada de óxido formada na superfície externa das colunas de fornos de reforma a vapor

    … sequence of different oxides. In addition, a microstructural modification was observed in its subsurface, due to the impoverishment of chromium in this region. A relation between both the thickness of the oxide and the transformed layer with the aging state and the magnetic response of the …

    brazil-uerj Repository record for Caracterização da camada de óxido formada na superfície externa das colunas de fornos de reforma a vapor (opens in a new tab)

  14. A study on laser weldability improvement of newly developed Haynes 282 superalloy

    … grain boundary M5B3 particles, in the material. Microstructural study of welded specimens coupled with Gleeble thermo-mechanical physical simulations shows that the primary cause of weld heat affected zone (HAZ) cracking in the alloy is the sub-solidus liquation reaction of intergranular M5B3 …

    manitoba Repository record for A study on laser weldability improvement of newly developed Haynes 282 superalloy (opens in a new tab)

  15. A study of laser-arc hybrid weldability of nickel-base INCONEL 738 LC superalloy

    … of innovative welding processes and/or the modification of the materials’ microstructural characteristics. Laser-arc hybrid welding is a relatively new welding process that appears to possess great potentials for joining the difficult-to-weld nickel-base superalloys. The research described …

    manitoba Repository record for A study of laser-arc hybrid weldability of nickel-base INCONEL 738 LC superalloy (opens in a new tab)

  16. Evaluation of fatigue behaviour of laser beam welded aerospace superalloy haynes 282

    … cracking of the alloy. This is achieved through microstructural modification of the alloy prior to welding through the use of appropriate heat treatment. However, at the core of this research is the main objective of methodically studying the effect of LBW on the high temperature fatigue crack …

    manitoba Repository record for Evaluation of fatigue behaviour of laser beam welded aerospace superalloy haynes 282 (opens in a new tab)

  17. Microstructural and superplastic characteristics of friction stir processed aluminum alloys

    … is a promising solid state processing tool for microstructural modification at localized scale. Dynamic recrystallization occurs during FSP resulting in fine grained microstructure. The main goal of this research was to establish microstructure/superplasticity relationships in FSP aluminum …

    must-thes Repository record for Microstructural and superplastic characteristics of friction stir processed aluminum alloys (opens in a new tab)

  18. Role of segregation and precipitates on interfacial strengthening mechanisms in metal matrix composites when subjected to thermo-mechanical processing

    … conditions and play a crucial role in important microstructural events such as segregation and precipitation at the matrix-reinforcement interface. These events dominate the cohesive strength and subsequent mechanical properties of the interface.</p> <p>At present the relationship between the …

    sheffield-hallam Download file for Role of segregation and precipitates on interfacial strengthening mechanisms in metal matrix composites when subjected to thermo-mechanical processing (opens in a new tab)

  19. Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties

    … material processing technique for microstructure modification of commercial high-strength Al alloys. Many variant techniques were developed in recent years that enabled light-weight and high-strength structure fabrication. Identifying relationship among process conditions, microstructures, and …

    utk-theses Repository record for Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties (opens in a new tab)

Page 1 of 2