Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"microvias"”.
-
Reliability of Copper-Filled Stacked Microvias in High Density Interconnect Circuit Boards
… (HDIs). HDI technology makes use of microvias as interconnects between different conductor layers. According to IPC standards, microvias are blind or buried vias that are equal to or less than 150 μm in diameter. Advances in miniaturized electronic devices have led to the evolution of …
-
Thermal Modeling And Laser Beam Shaping For Microvias Drilling In High Density Packaging
Laser drilling of microvias for organic packaging applications is studied in present research. Thermal model is essential to understand the laser-materials interactions and to control laser drilling of blind micro holes through polymeric dielectrics in multilayer electronic substrates. In order to …
-
Reliability Assessment of Voided Microvias in High Density Interconnect Printed Circuit Boards under Thermo-Mechanical Stresses
Microvias allow signal and power transmission between layers in high density interconnection printed circuit boards. Presence of voiding in filled microvias due to defective manufacturing process has raised concerns in industry. Voids can vary widely in shape and size and have been observed in both …
-
Advances in electronic packaging technologies by ultra-small microvias, super-fine interconnections and low loss polymer dielectrics
… of 5-10µm lines and spaces, and 10-30µm diameter microvias in a multilayer 3-D wiring substrate using 10-25µm thin film dielectrics with loss tangent in the <0.005. The research elements are organized as follows with a clear focus on understanding and characterization of fundamental materials …
-
Effects of Curing Agents and Drilling Methods on CAF Formation in Halogen-Free Laminates
… and phenolic-cured epoxy with laser drilled microvias and mechanically drilled vias were determined using the insulation resistance test. The failed coupons were cross-sectioned and examined using a Scanning Electron Microscope equipped with Energy-dispersive X-ray spectroscopy to verify the …
-
Parallel layered-medium integral-equation methods for electromagnetic analysis of high-fidelity full-size electronic package models
… core-layer vias, 1216 stacked microvias connected to the traces, and ~3×10⁴ single-layer microvias that stitch metallization layers. The proposed parallel layered-medium integral-equation methods reduced the number of unknowns for the full-wave analysis of this model to only …
-
Modeling and Diagnosis of Excimer Laser Ablation
… (SOP) methodology, require increasing use of microvias that generates vertical signal paths in a high-density multilayer substrate. A scanning projection excimer laser system has been utilized to fabricate the microvias. In this thesis, a novel technique implementing statistical experimental …
-
Study of glass interposers for co-packaging electronic and photonic chips
… transmission lines, through-glass vias (TGVs), microvias, and ball grid array (BGA) structures. Firstly, the efficacy of thermal Through-Glass Vias (TGVs) in dissipating heat from a laser chip bonded to a glass interposer is demonstrated by achieving a temperature reduction of approximately …
-
Integration of optoelectronics interconnects on glass interposers for high speed communications
The development and application of artificial intelligence and augmented reality as well as billions of new devices connected to the network have resulted in unprecedented demands on high computing power and high speed communications. The focus has shifted from Moore’s law on the transistor density …