Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 172 for “"mid-span"”.
-
Lateral Torsional Buckling of Wooden Beams with Mid-Span Lateral Bracing
… buckling analysis of wooden beam with a mid-span lateral brace subjected to symmetrically distributed loading. Two models are developed; one for the case of a rigid brace and another one for the case of a flexible brace. The analytical solutions are based on the principle of stationary …
-
Morton Effect Induced Instability in Mid-Span Rotorâ Hydrodynamic Bearing Systems
… on the Morton Effect induced instability in mid-span rotor systems is presented. First, the mechanism study is conducted. The simplified rotor models with isotropic linear bearing supports are adopted for the derivation of analytical expressions. The threshold speeds of instability in simple …
-
Determination of Bent-Cap and Stringer Deflections for Timber Railway Bridges Under Live Load
… affect bent-cap deflection, total stringer mid-span deflection, or net stringer mid-span deflection. In the past, it has been assumed that stringers comprising a chord acted as one member. However, the results of this research demonstrated that each stringer in a chord experienced extremely …
-
Examination of flow around second-generation controlled diffusion compressor blades in cascade at stall
… pressure measurements were also preformed at mid span on the blades at various Reynolds numbers. Flow visualization techniques were used to observe and record the flow on the surface of the blade. A correlation between the experimental results and computational fluid dynamic predictions was …
-
Experimental Evaluation of Composite Action of Steel Box Truss Towers in Flexure
… of two 20 foot tower segments spliced at mid span. Point loads were applied six feet from mid span in both directions. Load was applied as increments of mid span deflection until failure. The study included a literature review, construction, instrumentation, and testing of the specimens, …
-
Design of composite haunch beams and connections for long span applications
… hinge occurred at haunch toes followed by at the mid-span to form a plastic collapse mechanism. Haunch toe could be designed as the weakest section to form a plastic hinge with suitable amount of reinforcement in the slab and range of haunch length. Experimental results show that composite haunch …
-
Improving performance and rotordynamic characteristics of injection compressors via much longer balance-piston and division-wall seals
… and in-line compressors with the seal located at mid-span and at 82% of rotor span respectively, considering different seal lengths, radial seal clearances, as well as constant clearance and convergent-tapered seal geometries. Predictions of the synchronous rotordynamic coefficients and leakage …
-
Operational modal analysis, model updating and response prediction bridge under the 2014 Napa Earthquake
… out to determine the maximum displacement at mid-span, and to get the fundamental frequencies of the bridge during the excitation. A finite element (FE) model was developed based on the as-built drawings and model updaitng was perform. Finally, the updated model was used with the recorded …
-
Convergence Effect on Heat Transfer in Gas Turbine Blade Midchord and Trailing Edge Internal Cooling Channels
… of the blade. As a result, the cross-sections of mid-span region internal cooling channels become rectangular; however, the cross-sections of trailing edge internal cooling channels become a trapezoidal, angled, and high aspect ratio. Therefore, in this experimental study, to investigate heat …
-
Behaviour of continuous concrete slabs reinforced with FRP bars. Experimental and computational investigations on the use of basalt and carbon fibre reinforced polymer bars in continuous concrete slabs.
… mm in depth. The simply supported slabs had a span of 2000 mm, whereas the continuous slabs had two equal spans, each of 2000 mm. Different combinations of under and over FRP (BFRP/CFRP) reinforcement at the top and bottom layers of slabs were investigated. The continuously supported BFRP and …
-
Analysis of three-dimensional dynamic stall
… It is shown that, although the flow at the mid span sections of the finite wings exhibit many of the features of the two-dimensional case, there are some significant differences. In particular, the three-dimensional flow is dominated by the downwash from the wing tips. This causes the normal …
-
Internal Cooling Using Novel Swirl Enhancement Strategies in A Slot Shaped Single Pass Channel
… heat transfer enhancements used in the mid-span region of first stage turbine blades.
-
Prestress Losses and Temperature Effects on a Deck Bulb Tee Girder Bridge
… gauges. These instruments were placed at the mid-span and end of an exterior and center girder to effectively measure the bridge response in one quarter of the bridge superstructure. These instruments were placed in the precast plant and tied to the reinforcing steel before the concrete was …
-
Performance of Steel Fiber-Reinforced Concrete Beams Under Shock Tube Induced Blast Loading
… overall blast capacity, maximum and residual mid-span displacement, secondary fragmentation and damage control. Static results confirm the beneficial effect of fibers on improving the shear and flexural capacity of beams. Dynamic results show that use of steel fibers at a sufficient content …
-
EFFECTIVE WIDTH AND ULTIMATE STRENGTH OF CONTINUOUS COMPOSITE BEAMS.
… proposed to calculate the effective width at mid-span and supports, at yield and at ultimate loads. New design equations have been developed to calculate the ultimate strength of a composite section in both positive and negative moment regions. Ductility and deflection characteristics have …
-
Identification of force coefficients in flexible rotor-bearing systems - enhancements and further validations
… near bearing locations and also at rotor mid-span. At shaft speeds around the bending critical speed, the displacements at the rotor mid-span are an order of magnitude larger than the shaft displacements at the bearing locations. The enhanced identification procedure renders satisfactory …
-
Fe Modeling In Support Of Vibration Based Damage Detection In Bridges
… an experimental representation of a three-span concrete bridge structure located at the entrance to the main campus of The University of Mississippi in Oxford. Equivalent beam and 3D finite element models are created of an experimental setup incorporating levels of damage simulated using …
-
Analysis of wind turbine wake characteristics in atmospheric boundary layer winds
… structures, the vortices generated at the blade mid-span were found to have the twice the circulation of the tip vortex filament. The wake vortices were found to break-up in the downstream region of X/D = 0.6, forming the shear layer. Analysis of momentum transport also shows how the presence of …
-
Serviceability Design of Long-Span Timber Beams Considering Semi-Rigid Beam-Column Connections
… adoption of engineered timber systems in long-span construction has intensified the need for accurate prediction and control of mid-span deflections at the serviceability limit state (SLS). Conventional timber design practice typically assumes idealised pinned supports in deflection …
Page 1 of 9