Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 961 for “"milled"”.

  1. Effects of Pasteurization (Heating) on Milled Flaxseed Quality

    … content. Peroxide values of the pasteurized milled flaxseed were found to significantly increase (P ≤ 0.05) by week 2. Propanal formation coincided with peroxide value development over 20 weeks of storage. Pasteurized flaxseed milled under refrigerated temperatures (10 – 18 °C) did not …

    ndsu Repository record for Effects of Pasteurization (Heating) on Milled Flaxseed Quality (opens in a new tab)

  2. Fracture toughness of conventional, milled and printed denture bases

    … propagation than the tested conventional and milled materials. The tested milled denture base showed the least resistance to crack propagation, with the lowest KIC values both at 7 d and 90 d. Water storage for 90 d significantly decreased KIC of the tested conventional and milled materials.

    ubc Repository record for Fracture toughness of conventional, milled and printed denture bases (opens in a new tab) Download PDF for Fracture toughness of conventional, milled and printed denture bases (opens in a new tab)

  3. Sustainability consideration in machining of 2½d milled features

    … show that energy consumption in machining 21/2D milled features can be improved by optimising the use of existing machining processes and by designing new machining processes and technologies. The characteristics of machining operations with energy considerations have been investigated using …

    greenwich Download PDF for Sustainability consideration in machining of 2½d milled features (opens in a new tab)

  4. Analyzing Milled Rice Breakage Patterns Under Diverse Environmental Settings

    … and storage practices on the quality of milled rice using three cultivars: CLL16 (long grain pureline), XP753 (long grain hybrid), and Titan (medium grain pureline). Three distinct objectives guided the research: (1) assessing the impact of relative humidity (RH), temperature, and …

    arkansas Repository record for Analyzing Milled Rice Breakage Patterns Under Diverse Environmental Settings (opens in a new tab)

  5. Unveiling Factors Influencing Extract Yield from Milled Rice in Brewing

    … alternative starch source. However, the use of milled adjunct rice by brewers has remained limited, largely due to knowledge gaps about cultivar-specific properties relative to brewing. Chapter 1 provides an overview of rice as a brewing adjunct, reviewing the physiochemical properties important …

    arkansas Repository record for Unveiling Factors Influencing Extract Yield from Milled Rice in Brewing (opens in a new tab)

  6. Genetics underlying flaking grit yield from dry milled maize grain

    A survey of U.S. corn germplasm was conducted to explore genetics underlying flaking grit yield (FGY) and evaluate the relationship between FGY and agronomic performance, with an aim to devise breeding strategies to simultaneously improve FGY and agronomic performance in the future. The survey used …

    uiuc Repository record for Genetics underlying flaking grit yield from dry milled maize grain (opens in a new tab)

  7. Organic complexes of unrefined and milled kaolin: An infrared spectroscopic study.

    … the surface sites present on unrefined and ball milled Cornish kaolin, with a view to ultimately determining the mode of interaction between the mineral and industrially significant organic molecules. Milling and temperature were found to affect the structure of kaolin and types of surface sites …

    sheffield-hallam Download PDF for Organic complexes of unrefined and milled kaolin: An infrared spectroscopic study. (opens in a new tab)

  8. Novel Auxiliary Fixture System to Enhance Milled Thin-Walled Parts Quality

    … pins. A multi-pocked industrial workpiece was milled in order to evaluate the performance of a six-pin fixture. The results showed that the stiffness increased by 90%, and the damping ratio was increased tenfold. The cutting force decreased by 70% for milling a slot in the bottom floor of the …

    guelph Repository record for Novel Auxiliary Fixture System to Enhance Milled Thin-Walled Parts Quality (opens in a new tab)

  9. Trifluoromethylated fullerenes and polycyclic aromatic hydrocarbons and anaerobically milled silicon nanoparticles

    … of silicon. Metallurgical-grade silicon was wet-milled in a stirred media mill to produce nanoparticles. Several milling fluids, additives, and milling parameters have been tested and compared between aerobic and anaerobic milling. It was determined that oxygen and aromatic molecules serve as …

    colostate Repository record for Trifluoromethylated fullerenes and polycyclic aromatic hydrocarbons and anaerobically milled silicon nanoparticles (opens in a new tab)

  10. Characterization of ball-milled bismuth vanadate and transition metal oxide nanoparticles

    Photoelectrochemical (PEC) water splitting has been widely accepted as a favorable approach for hydrogen production using solar energy. Bismuth vanadate, or BiVO4, is considered an efficient and stable photoelectrode material. Most importantly, the appropriate band gap (~2.4eV) allows BiVO¬4 to …

    bu Repository record for Characterization of ball-milled bismuth vanadate and transition metal oxide nanoparticles (opens in a new tab)

  11. HYDROGEN GENERATION BY REACTION OF BALL-MILLED MAGNESIUM POWDER WITH HOT WATER

    … higher surface area to volume ratios are ball-milled with certain salts (e.g. NaCl and KCl). The weight percentage (wt.%) of these salt within the mixture influences hydrogen production yield by facilitating the creation of reaction sites. Here, these salts produce cavities within the …

    sask Repository record for HYDROGEN GENERATION BY REACTION OF BALL-MILLED MAGNESIUM POWDER WITH HOT WATER (opens in a new tab)

  12. Comparison of Retention between Milled and Conventional Denture Bases: A Clinical Study

    … method of fabrication. CAD/CAM dentures milled from prepolymerized PMMA acrylic resin blocks theoretically have reduced or no polymerization shrinkage. There have been no clinical studies, to date, that have compared retention values between milled and conventionally processed denture …

    loma-linda Repository record for Comparison of Retention between Milled and Conventional Denture Bases: A Clinical Study (opens in a new tab)

  13. A Comparison of Milled Rice Fissuring Kinetics of Hybrid and Pureline Cultivars

    … of hybrid cultivars. This study compares the milled rice fissuring kinetics of hybrid and pureline cultivars. Also, this study elucidates the effects of kernel type (long-grain vs. medium-grain rice cultivars), surface lipid content (SLC), and kernel thickness on fissuring rates. Three hybrid …

    arkansas Repository record for A Comparison of Milled Rice Fissuring Kinetics of Hybrid and Pureline Cultivars (opens in a new tab)

  14. Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration

    The process developed here can be easily integrated into any corn processing facility, especially dry-grind ethanol plants. The solvent extraction step involves only mixing and a filtration/centrifugation step. The filtered extract, after further treatment if necessary to improve protein purity, …

    uiuc Repository record for Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration (opens in a new tab)

  15. Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration

    … membrane technology. Extraction of zein from dry milled whole corn was optimum with 70% ethanol at 50°C using a solvent-to-solids ratio of 6 ml ethanol per g corn for 45 minutes. Zein concentration in extract was 3--9 g/l. Continuous column extraction was also best at 50°C and 70% ethanol; …

    uiuc Repository record for Production of Zein From Dry Milled Corn by Solvent Extraction and Ultrafiltration (opens in a new tab)

  16. Wettability Control of Short Milled Carbon Fibre Reinforced Epoxy Composite by Silica Nanoparticles

    … addition and b) 0 to 2 wt% FNS plus 10 wt% short milled carbon fibre (SMCF). Surface energy related to the bonding characteristics, has been measured/assessed by Fourier transform infrared (FTIR) and Thermo -gravimetric analysis (TGA) while surface roughness was obtained by a) Stylus profiler (SP) …

    unsw Repository record for Wettability Control of Short Milled Carbon Fibre Reinforced Epoxy Composite by Silica Nanoparticles (opens in a new tab)

  17. Characterization framework to develop ball-milled thermites as additives to polymer-bound explosives

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2026-02-19 without embargo terms

    uiuc Repository record for Characterization framework to develop ball-milled thermites as additives to polymer-bound explosives (opens in a new tab)

Page 1 of 49