Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"milling operation"”.

  1. Multilevel on-line surface roughness recognition system in end milling operation

    … to recognize surface roughness in vertical end-milling process. Both models integrate machining parameters of (1) feed speed, (2) depth of cut, (3) tool type, (4) tool material, (5) work material, (6) spindle speed, (7) vibration, and (8) tool diameter. The fuzzy net controller is composed of …

    iastate Repository record for Multilevel on-line surface roughness recognition system in end milling operation (opens in a new tab)

  2. Virtual milling

    Milling is used to manufacture a wide variety of metal parts, from simple to complex geometries, in small or large volumes. The requirements for these parts usually necessitate that the milling operation is accurate, but also the production rate must be as high as possible. These two requirements, …

    ubc Repository record for Virtual milling (opens in a new tab) Download PDF for Virtual milling (opens in a new tab)

  3. Implementace a aplikace metody párování obráběných materiálů a břitů při orbitálním vrtání

    … implement modeling of uncut chip thicknesses and milling forces in 3-axis milling, and apply it to orbital drilling. The goal is to understand deeper the process, and develop a tool which permits to model a wide range of end-mill tool geometries, and most of 3-axis milling operations.In this …

    brno-tech Repository record for Implementace a aplikace metody párování obráběných materiálů a břitů při orbitálním vrtání (opens in a new tab)

  4. An X-Ray Diffraction Analysis of Cold Work Produced in Face Milling

    … out concerning the power requirements of a milling operation. In the past, most of these investigations aimed at finding the amount of cold work that was done by a certain type of cutter on a specimen were of the calorimetric type in which the beat generated by the milling section was …

    marquette Repository record for An X-Ray Diffraction Analysis of Cold Work Produced in Face Milling (opens in a new tab)

  5. Determination of economically marginal tree size through the application of conventional and linear programming techniques

    Various investigators of logging operation efficiency have stated that the harvesting of small trees is inevitably associated with higher operating costs. A comprehensive survey of literature has been presented to substantiate this fact. The cited information was supplemented, for the purpose of …

    ubc Repository record for Determination of economically marginal tree size through the application of conventional and linear programming techniques (opens in a new tab) Download PDF for Determination of economically marginal tree size through the application of conventional and linear programming techniques (opens in a new tab)

  6. Rutulinio malūno glaisto gamybai parametrų tyrimas /

    … stiffen up. When the rotary mill finishes the milling operation there is no one to empty it. This is very inconvenient. That’s why the operation time of the mill has to be lowered. Also the productivity index needs to be increased and operation costs lowered. The steel (1,4301) balls get the …

    vilnius Repository record for Rutulinio malūno glaisto gamybai parametrų tyrimas / (opens in a new tab)

  7. Generic Cost Estimation Framework for Design and Manufacturing Evaluation

    … as a design consequence rather than as an operational outcome. A comprehensive framework using System Analysis fundamentals is designed to study ‘Process Cost’ aspects of part or design. The work gives detailed implementation of this new approach for objects manufactured largely by milling …

    odu Repository record for Generic Cost Estimation Framework for Design and Manufacturing Evaluation (opens in a new tab)

  8. Empirical model-based control for end milling process

    … surface finish and the cutting force in the end milling machining process, a design of experiment has been conducted to determine the effect of two different materials (aluminium and steel) and the machining parameters (feed rate, spindle speed) at a predefined depth of cut. Regression model has …

    njit Repository record for Empirical model-based control for end milling process (opens in a new tab)

  9. New tool design for measuring tool displacement in milling

    Monitoring tool displacement during a milling process allows the operator to identify when there is relative movement between the cutting tool and the workpiece. When the relative movement between the cutting tool and the workpiece becomes large enough, the displacements of the cutting tool become …

    missouri Repository record for New tool design for measuring tool displacement in milling (opens in a new tab)

  10. Effects of machining system parameters and dynamics on quality of high-speed milling

    … stability and the surface quality of high-speed milling. With the use of structural tool modal parameters, the material cutting force coefficients and the axial depth of cut, the system can avoid the chatter phenomenon of the tool at high cutting speeds. The surface roughness finish in the …

    missouri Repository record for Effects of machining system parameters and dynamics on quality of high-speed milling (opens in a new tab)

  11. Design and analysis of a CNC system for machining and monitoring

    … and analysis of a modular CNC system for a milling machine. The feed drive control system of the machine tool is thoroughly studied. The mathematical model for the feed drive control system, which consists of a motion controller, power amplifiers and DC-servo motors, is developed and …

    ubc Repository record for Design and analysis of a CNC system for machining and monitoring (opens in a new tab) Download PDF for Design and analysis of a CNC system for machining and monitoring (opens in a new tab)

  12. Experimental and Machine Learning Approaches to Comprehending Surface Characteristics and Mechanical Properties of Direct Metal Laser Sintering-Hybrid Milling Manufactured Maraging Steel

    … by layer from metallic powders. DMLS-hybrid milling is a new addition to additive manufacturing methods. The synergistic approach of additive and subtractive manufacturing methods offers benefits from both manufacturing paradigms. The process parameters- laser power, print speed, layer …

    umn Repository record for Experimental and Machine Learning Approaches to Comprehending Surface Characteristics and Mechanical Properties of Direct Metal Laser Sintering-Hybrid Milling Manufactured Maraging Steel (opens in a new tab)

  13. Robotically Assisted Active Vibration Control in Milling

    … process. In this thesis, the robotic-assisted milling approach is extended to consider an actively controlled robot arm, to suppress the chatter vibrations for milling operation. To assess the feasibility of the method, a proof-mass actuator is assembled on a beam structure that is …

    whiterose Download PDF for Robotically Assisted Active Vibration Control in Milling (opens in a new tab)

  14. Robotic machining evaluation of the positioning accuracy and the machined surface quality

    … the surface quality of the robotic machining operations has not been sufficiently investigated. Indeed, the relative works are restricted to the finishing operations such as grinding and deburring. In this work, the surface quality of the slot milling operation which is executed by an …

    ets-quebec Download PDF for Robotic machining evaluation of the positioning accuracy and the machined surface quality (opens in a new tab)

  15. Mechanics, dynamics and stability of turn-milling operations

    Recent turn-milling machine tools are capable of carrying out turning, drilling, boring, milling and grinding operations simultaneously, hence they are widely used in industry to produce complex parts in a single set-up. Turn-milling machines have translational axes with a high speed spindle to …

    ubc Repository record for Mechanics, dynamics and stability of turn-milling operations (opens in a new tab) Download PDF for Mechanics, dynamics and stability of turn-milling operations (opens in a new tab)

  16. Discrete modeling of sculptured surface machining for robust automatic feedrate selection

    … in three and five-axis CNC machining reduces milling efficiency. Manually estimated feedrates tend to be conservative and constant, greatly increasing mill time. The goal of this research is to develop robust techniques and software tools for automatically generating optimized feedrates for …

    unh-thes Repository record for Discrete modeling of sculptured surface machining for robust automatic feedrate selection (opens in a new tab)

  17. Digital Apprentice for Chatter Detection: An On-line Learning Approach to Regenerative Chatter Detection in Machining via Human-Machine Interaction

    … productivity and part quality in machining operations. This thesis proposes an on-line approach for chatter detection via effective human-machine interaction, facilitating knowledge transfer from experienced machinists to the “digital apprentice” through the “learnable skill primitive” (LSP) …

    gatech Repository record for Digital Apprentice for Chatter Detection: An On-line Learning Approach to Regenerative Chatter Detection in Machining via Human-Machine Interaction (opens in a new tab)

  18. Machinability of nickel based superalloys with carbide and ceramic tools in milling

    … superalloys respond to machining during a milling operation. Special consideration in this study has been given to experimental testing, accuracy and precision. Tool wear and surface roughness were investigated for Titanium Aluminum Nitride (TiAlN) coated and uncoated carbide tools under …

    concordia Download PDF for Machinability of nickel based superalloys with carbide and ceramic tools in milling (opens in a new tab)

  19. An experimental study on high speed milling and a predictive force model

    … out in an experimental study on High Speed Milling and a predictive force model. The Oxley's machining theory [36] that can be considered a purely theoretical approach, which has not yet been applied to the high speed milling process is used to model this process in order to predict the …

    unsw Repository record for An experimental study on high speed milling and a predictive force model (opens in a new tab)

  20. Prediction of cutting forces in five-axis micro-ball end milling

    Five axis micro-ball end milling has been shown as a viable option for machining complex free form surfaces with high aspect ratios and provide micron-scale tolerances. Unfortunately, due to the high fragility of the cutting tool, premature tool failure has been a major challenge in micro-scale …

    uiuc Repository record for Prediction of cutting forces in five-axis micro-ball end milling (opens in a new tab)

Page 1 of 2