Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 80 for “"mixing performance"”.
-
Evaluation of membrane bioreactor mixing performance via computational fluid dynamics modelling
… of the reactor characteristics of each plant on mixing performance. The model was calibrated using the site data collected from the two MBRs. The bio-reactions component of the model was benchmarked against the COST Activated Sludge Model No. 1 Benchmark. Evaluation of the energy consumption …
-
Mixing performance of a novel, continuous confined impinging jets mixer using competitive reactions
… competitive reactions in order to determine its mixing effectiveness. The ultrasonic energy enhances micromixing of the fluid jet streams, which results in an overall mixing effectiveness improvements in different physical and chemical processes. In the competitive reactions system used here …
-
Evaluation of the thermal and mixing performance of an agitated vessel for processing of complex liquid foodstuffs
… attributes. In this study, the heating and mixing efficiency of a bespoke vessel used for heat treatment of complex foodstuffs (250 litre ‘Vesuvio’ vessel manufactured by Giusti Ltd) was investigated. Enzymatic Time Temperature Integrators (TTIs) were used to determine the heat treatment …
-
DEM Study on the Mixing Behaviour of U-shaped Ribbon Mixers
Particle mixing is widely practised in a broad range of powder processing, including ceramics, pharmaceutical, food, and chemical industries. Although significant developments have been made in understanding the mixing performance by conducting experiments during the last decades, the detailed …
-
Confined Mixing of Multiple Transverse Jets
The mixing performance of multiple transverse jets has been evaluated experimentally. Measurement techniques included laser Doppler velocimetry and planar laser induced fluorescence. Basic findings are consistent with results presented in literature for single jet mixing behavior. Mixing …
-
Study of Effects of Design Modification in Static Mixer Geometry and its Applications.
Mixing of fluids is one of the most important industrial operations. Static mixers, also known as motionless mixers, are very efficient devices used for mixing of both single phase and multiphase fluids. With a gradual increase in the usage of static mixers in various industrial operations, it is …
-
Blending of non-Newtonian fluids in static mixers: assessment via optical methods
The performance of KM static mixers has been assessed for the blending of Newtonian and time-independent non-Newtonian fluids using planar laser induced fluorescence (PLIF). A stream of dye is injected at the mixer inlet and the distribution of dye at the mixer outlet is analyzed from images …
-
Experimental and numerical investigations of novel passive micromixers using u-IF
… Typical micromixer applications include the mixing of reagents prior to chemical or biological reactions, drug delivery, medical diagnostics through biological sampling, and DNA sequencing or synthesis. The objective of the present investigation is to develop novel passive microfluidic …
-
Interactions of micromachines and the fluid environment: rapid mixing in micromixers
This Ph.D thesis investigates the mixing performances in a micro T-mixer and a cross-shaped micromixer incorporated with static mixing elements. The micromixers are fabricated on a silicon substrate sandwiched between a glass cover plate and a supporting polystyrene plate. Design calculations and …
-
Simulation and Experimental Investigation of Fluid Mixing Enhancement with Orifice Plate
Current experimental and simulation fluid mixing studies aim to increase mixing efficiency and incorporate various measurement methods to quantify mixing. In this thesis, comprehensive simulation and experimental studies were carried out to investigate the effects of an orifice plate on mixing. …
-
Investigation of the use of horizontal baffles in a gas-liquid agitated tank
… parameters and determine their effect on the mixing performance of a gas-sparged agitated contactor and compare to contactors of standard design. Unlike standard baffle design, horizontal baffles are located at the dispersion surface. The following horizontal baffle parameters were …
-
Particle engineering via surface modification: model based analysis
… effects of material stiffness, particle size and mixing intensity. The results show that the coating quality improvs with the decrease of guest particle size and stiffness. The micro-sized guest particles detach from the host particles above 30 Gs, indicating the mixing intensity should be …
-
Particle scale investigation of the mechanisms of wet particle flow in rotating drums
… surface. The capillary force in general reduced mixing performance. However, mixing of dry particles in drum transverse plane was poorest at 64% filling, and increasing cohesion at that filling improved mixing. A mathematical model based on particle circulation period was proposed to predict the …
-
A novel laboratory dispersive and distributive minimixer and applications. Development of a new minimixer that can duplicate mixing which occurs in a large twin screw extruder.
The mixing of additives into a plastic is an extremely important step in the plastics industry, necessary for the manufacture of almost every conceivable product. Therefore the costs in developing new products can prove very expensive as the testing is usually carried out using full scale machines, …
-
Use of Positron Emission Particle Tracking (PEPT) for studying laminar mixing in static mixers
… used commonly in different industries mainly for mixing of high viscosity fluids. The performance of this group of mixers has been investigated by many groups via numerically based studies. Experimental studies, however, are limited, particularly for measurement of the flow fields with fluids of …
-
Experimental investigation of normal, sonic injection through a wedge-shaped nozzle into supersonic flow
… jet area growth rate were used to compare the mixing performance of the nozzles. Oil flow photography was used to determine the size of the three-dimensional boundary layer separation zone in front of each nozzle, and nanoshadowgraph photography was used to visualize the system of shocks and …
-
Mixing in high throughput experimentation reactors
… a low Reynolds Number, Re, which results in poor mixing efficiencies. Together with unconventional geometries, i.e. lack of baffles and simple impeller designs, their fundamentals are not fully understood. The present study applies Particle Image Velocimetry (2-D PIV) and Planar Laser Induced …
-
Fin-Guided Fuel Injection Enhancements for Low Aspect Ratio Scramjet Combustors
… has been conducted in order to provide baseline performance data. The maximum combustion performance was achieved at an equivalence ratio of 0.25 due to poor mixing. Subsequent fuel injection studies investigated transverse and ramped parallel mixing schemes in a Mach 2 duct. It was shown ramped …
-
INVESTIGATION OF FUEL-AIR MIXING IN A MICRO-FLAMEHOLDER FOR MICRO-POWER AND SCRAMJET APPLICATIONS
… a first principles model of the fuel-air mixing process in a micro-flameholder. This model is used to identify key design parameters involved in fuel-air mixing and to characterize how mixing performance scales with the Reynolds number. The results of this analysis show that fuel-air …
-
Experimental investigation of the fluid velocity distribution in stirred tank reactors equipped with retreat-blade impellers using laser doppler velocimetry
… industry for at least the past 40 years, the mixing characteristics of these systems have not been studied to any great extent, making it difficult to predict mixing performance in any given operation. In this work, the velocity distribution inside the typical glass-lined vessel/impeller …
Page 1 of 4