Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 161 for “"modal parameters"”.
-
Identification of modal parameters based on moving force excitation
… the possibility of estimating the bridge modal parameters, i.e., natural frequencies, damping ratios, and modal masses, under excitation of a moving vehicle with the simultaneous use of the moving input acceleration signal and the measured bridge acceleration responses. In the first stage, …
-
Placement of Piezoelectric Actuators for Active Control of Vibration Using Modal Parameters
An equation is derived to model the piezoelectric actuators incorporation with flexible structures. This equation permits the comparison of the performance indices over the entire structure for a piezoelectric actuator with constant area, which is unachievable if the Finite Element Method is used …
-
Model updating of modal parameters from experimental data and applications in aerospace
… test structure is updated using experimental modal data from a Ground Vibration Test. In order to assess the accuracy and physical consistency of the updated model a novel approach is applied where only a fraction of the mode shapes and natural frequencies from the experimental data base is …
-
Determination of the Modal Parameters of a Five Story Reinforced Concrete Structure Using Ultra-Low Level Excitation and Computational Analysis
The determination of a building’s modal parameters (natural periods and mode shapes) using ultra-low level forced vibration testing and analytical modeling were critically compared. The structure utilized for this experiment is the Robert E. Kennedy Library on the campus of California Polytechnic …
-
Implementation of a Drop Test Impact Rig for Dynamic Testing of High Speed Craft Shock Mitigation Seats and Extraction of Modal Parameters
… Further, in order to identify the seats' dynamic parameters from drop test data, the Eigensystem Realization Algorithm (ERA), a modal-analysis-based system identification method, was applied to two commercial shock-mitigating seats provided by DRDC-Atlantic.
-
Kalman filter design for real-time estimation of modal parameters and cutting force coefficients for determining the dynamic stability of high-speed low-radial-immersion milling processes
… (EKFs) are considered here for estimating modal parameters or cutting force coefficients of the tool- workpiece dynamic system from tool deflection measurements in high-speed low-radial-immersion milling. These parameter estimates could be used to predict the dynamic stability of the …
-
Análise modal operacional de uma bomba centrífuga submersa utilizando a decomposição melhorada no domínio da frequência
The identification of modal parameters of electrical submersible pumps (ESP) is part of the process of increasing the reliability of this equipment, which is installed in places that are inaccessible, from a maintenance point of view, for oil exploitation, such as offshore oil wells and seabed, so …
-
Autoregressive model updating for modal analysis of non-stationary vibration systems
Operational modal analysis (OMA) has recently become one of the most effective techniques to extract modal parameters (natural frequencies, damping ratios, and mode shapes) for practical vibrations under working conditions. Many good results have been observed in numerous domains, such as robotics, …
-
Statistical Models of the Lambert Road Bridge: Changes in Natural Frequencies Due to Temperature
… SHM systems can be used to monitor the bridge’s modal parameters. Changes in modal parameters may indicate a change in the structure itself, boundary conditions, or damage. These modal parameters also vary with environmental factors, mainly temperature. Statistical models help show the …
-
Methods for Structural Health Monitoring and Damage Detection of Civil and Mechanical Systems
… structures several methods make use of modal parameters such as, natural frequency, damping ratio and mode shapes. In the present work four methods for modal parameter estimation and two methods for have been evaluated for their application to multi degree of freedom structures. The …
-
Linear continuous-time system identification and state observer design by modal analysis
… on the use of continuous-time functions, the modal functions, defined in terms of the system output, the output derivatives and the state variables under the assumption that the order n of the observable system is known a priori. The modal functions are obtained by linear filtering operations …
-
Modal characteristics of satellite appendages using on-orbit output-only modal testing
Output-only modal testing is an attractive new technique with potential applications in civil, mechanical, and aerospace engineering. It may effectively be used for model validation, model updating, quality control, and health monitoring through the determination of modal characteristics of the …
-
Correlation of experimental and finite element modal analysis of the PHALANX M61A1 Close-In Weapon System
… this study are to provide an experimental set of modal parameters and to validate a new finite-element model (FEM) of the gun. Swept sine frequency response measurements on an actual PHALANX gun were conducted in the laboratory to obtain a complete set of modal parameters (frequency, amplitude, …
-
Experimental determination of the impulse response function for elastic vibrating systems
… unbiased in the presence of measurement noise. Modal parameters are extracted from impulse response estimates using a modification of the Pisarenko harmonic decomposition method. The advantages of a time-domain approach over traditional Fourier analysis procedures, including avoidance of leakage …
-
Investigating Various Modal Analysis Extraction Techniques to Estimate Damping Ratio
… have devoted their work to the development of modal analysis extraction techniques in order to obtain more reliable identification of the modal parameters. Also, as a consequence of all this work, there are some other works devoted to the evaluation and comparison of these methods in order to …
-
Experimental and Computational Investigation of a Highly Flexible Airframe Taxiing Over an Uneven Runway for Aircraft Vibration Testing
… prototypes to experimentally determine the modal parameters of aircraft prototypes. These modal parameters are used to validate and update the finite element model of the aircraft for reliable predictions of their structural, aeroelastic and aeroservoelastic responses. Due to the high cost …
-
Implementation of a modal filtering procedure
… developed in order to investigate the process of modal parameter estimation and non-parametric system identification. The theory underlying the process of modal parameter estimation is reviewed and the decoupling of a MIMO system into several SISO systems is demonstrated. Modal filtering is shown …
-
Identification of the foundation parameters of turbomachinery
… unbalance in the rotor are used to identify the modal parameters, which construct the equivalent foundation. Modified modal matrix is introduced to the identification equation, which enables the modal parameters of each vibration modes to be solved independently and therefore simplifies the …
-
A method of determining modal residues using an improved residual model and least squares
… is presented which uses predetermined global parameters and an improved residual model to iteratively determine modal residues. The motivation for such a technique is to determine modal parameters rapidly so that, as data acquisition techniques become faster, more structural degrees of freedom …
Page 1 of 9