Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"mode I fracture testing"”.
-
Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition
… to ensure such Zr components operate safely, fracture analysis of Zr alloys has been widely studied. Considering the high cost and difficulties associated with using neutron-irradiated Zr specimens for fracture analysis, proton irradiated testing has been proposed to reduce the cost and …
-
Mode-I Fracture in Bonded Wood: Studies of Adhesive Thermal Stability, and of the Effects of Wood Surface Deactivation
… studies; the common theme in each was the use of mode-I fracture testing to evaluate wood adhesion. In the first study, mode-I fracture testing was used to compare the thermal stability of polyurethane (PUR) and resorcinol-formaldehyde (RF) wood adhesives. Bonded specimens for both adhesives were …
-
Carboxymethylcellulose Acetate Butyrate Water-Dispersions as Renewable Wood Adhesives
… analysis, light and fluorescence microscopy, and mode I fracture testing. Thermal analyses showed that the polymer glass transition temperature significantly increased when bonded to wood. CMCAB dispersions produced fairly brittle adhesive-joints; however, it is believed toughness can likely be …
-
Mode I Fracture Toughness of Eight-Harness-Satin Carbon Cloth Weaves for Co-cured and Post-bonded Laminates
Mode I interlaminar fracture of 3k 8-Harness-Satin Carbon cloth, with identical fill and weft yarns, pre-impregnated with Newport 307 resin was investigated through the DCB test (ASTM D5528). Crack propagations along both the fill and weft yarns were considered for both post-bonded (co-bonded) and …
-
An Improved Method for the Fracture Cleavage Testing of Adhesively-Bonded Wood
… work describes the development of an improved mode I fracture testing procedure for adhesively-bonded wood, and demonstrates the sensitivity of this approach. The two significant improvements were: 1) the use of the flat double cantilever beam (DCB) geometry, which has been uncommon for wood …
-
Dynamic Fracture Toughness of Polymer Composites
… project, the focus is on determining dynamic fracture toughness property of fiber reinforced polymer composites by using a combined numerical- experimental methodology. Impact tests are conducted on Split-Hopkinson pressure bar with required instrumentation to obtain load-history and …
-
Understanding the correlation between wrinkle morphology, fracture and fatigue of plain woven CFRP laminates through mechanical and ultrasonic characterization.
… (CFRP) laminates, can significantly alter the fracture and fatigue behavior of composite structures. This dissertation presents a comprehensive experimental investigation into the influence of out-of-plane wrinkles on interlaminar fracture toughness under both Mode I and Mode II loading …
-
Moisture-Cure Polyurethane Wood Adhesives: Wood/Adhesive Interactions and Weather Durability
… durability. For these purposes, one simplified model PUR (MPUR) and three more commercially significant PURs (CPURs) with different hard segment contents were prepared. Separately, an early side project involved the synthesis of a 13C and 15N double-labeled polymeric …
-
Studies of PF Resole / Isocyanate Hybrid Adhesives
… was found to increase with the PMDI content. Mode I fracture testing of resole/PMDI hybrid adhesive bonded wood specimens indicated the dependence of bondline fracture energy on the blend ratio. The 75/25 PF/PMDI blend exhibited a high fracture energy with a fast cure speed and processable …
-
Fracture and Friction Characterization of Polymer Interfaces
… This thesis attempts to characterize the fracture resistance of AM materials produced by the PolyJet process. Test standards established for mode I fracture testing of adhesive joints are adapted to evaluate the fracture resistance and interface between two printed acrylic-based …