Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"mode-mixity"”.

  1. Characterizing and Modeling the Effects of Mode Mixity and Bond Line Thickness on the Traction-Separation Response of Structural Adhesive Joints

    … the need for high fidelity characterization and modelling of adhesive joints has gained in importance. In this thesis, new specimen geometry and analysis techniques are presented to characterize the properties necessary to model the traction-separation response in Mode I, Mode II, and mixed mode …

    waterloo Repository record for Characterizing and Modeling the Effects of Mode Mixity and Bond Line Thickness on the Traction-Separation Response of Structural Adhesive Joints (opens in a new tab)

  2. Improving the delamination bridging behaviour of z-pins through material solutions

    … from full pull-out to rupture occurs at a mode-mixity of 0.55, whereas BMI Z-pins start failing at a mode-mixity of 0.19.<br/>The effect of the fibre constituent is then explored. Z-pins are fabricated using polybenzoxazole (PBO) fibres. Single pin bridging tests reveal that unidirectional …

    bristol Repository record for Improving the delamination bridging behaviour of z-pins through material solutions (opens in a new tab) Download PDF for Improving the delamination bridging behaviour of z-pins through material solutions (opens in a new tab)

  3. An experimental investigation of the effects of elastic modulus and yield strength on fracture surface interference in shear loaded cracks

    … properties on fracture surface interference in Mode II loaded cracks in 7075 aluminum. 4340 and 8642 steels. Factors studied included elastic modulus, yield strength, mode mixity and fracture surface geometry. An asymmetric four point bend specimen and fixture was developed to apply pure Mode II …

    unh-thes Repository record for An experimental investigation of the effects of elastic modulus and yield strength on fracture surface interference in shear loaded cracks (opens in a new tab)

  4. Domain-Integral Methods for Computation of Fracture-Mechanics Parameters in Three-Dimensional Functionally-Graded Solids

    … along crack fronts in FGM configurations under mode-I thermo-mechanical loading. The proposed domain integral formulation accommodates both linear-elastic and deformation-plastic behavior in FGMs. Next discussed is the extension of interaction-integral procedures to compute directly mixed-mode …

    uiuc Repository record for Domain-Integral Methods for Computation of Fracture-Mechanics Parameters in Three-Dimensional Functionally-Graded Solids (opens in a new tab)

  5. Interfacial fracture of micro thin film interconnects under monotonic and cyclic loading

    … fracture toughness under a wide range of mode mixity. This test uses common IC fabrication techniques and overcomes the shortcomings of available methods. The developed test has been used to measure the interfacial fracture toughness for Ti/Si interface. It was found that for low mode …

    gatech Repository record for Interfacial fracture of micro thin film interconnects under monotonic and cyclic loading (opens in a new tab)

  6. Development and fracture behaviour of graded alumina/epoxy joins

    … to this elasticity gradient will experience mode-mixity, and possible subsequent crack deflection. Explicit analytical solutions for the stress state at the tip of an angled crack in a graded material of a given finite geometry do not exist, and ongoing crack path development in such a …

    unsw Repository record for Development and fracture behaviour of graded alumina/epoxy joins (opens in a new tab)

  7. Cohesive Modeling of Dynamic Fracture: Rate Dependence and Intersonic Crack Motion

    … transient intersonic crack motion under mixed-mode conditions. Results show that exclusive shear damage in the cohesive zone is responsible for intersonic crack propagation even though the external load comprises of both shear and tensile components. The situation is very different in the …

    uiuc Repository record for Cohesive Modeling of Dynamic Fracture: Rate Dependence and Intersonic Crack Motion (opens in a new tab)

  8. Multiscale Interface Modeling for Structural Health Monitoring and Failure Prediction in Adhesive Joints and Directionally Dependent Materials

    … of lightweight structures. However, predictive modeling of single-lap joints under process-to-service loading remains a non-trivial task. This dissertation develops and validates a process-aware interface framework that unifies cohesive representations of the adhesive layer and thermomechanical …

    utk-theses Repository record for Multiscale Interface Modeling for Structural Health Monitoring and Failure Prediction in Adhesive Joints and Directionally Dependent Materials (opens in a new tab)

  9. Experimental and theoretical study of on-chip back-end-of-line (BEOL) stack fracture during flip-chip reflow assembly

    … cracking and/or delamination is a common failure mode due to the low mechanical and adhesive strength of the dielectric materials as well as due to high thermally-induced stresses. However, there are no available cohesive zone models and parameters to study such interfacial cracks in sub-micron …

    gatech Repository record for Experimental and theoretical study of on-chip back-end-of-line (BEOL) stack fracture during flip-chip reflow assembly (opens in a new tab)

  10. Micromechanics of void growth and coalescence - Vapor pressure induced failure in thin film and multilayer structures

    … PROPERTIES NATURALLY INDUCES A PREDOMINANTLY MODE II LOADING ON INTERFACES. WHEN VAPOR PRESSURE IS SUPERPOSED ON MODE II DOMINANT LOADING, THE BEHAVIOR OF INTERFACE FAILURE IS NOT WELL-UNDERSTOOD TO DATE. PRESENT WORK ADDRESSES THIS KEY ISSUE.</P><P>OUR RESULTS SHOW THAT: I) IN BIMATERIAL …

    nus Repository record for Micromechanics of void growth and coalescence - Vapor pressure induced failure in thin film and multilayer structures (opens in a new tab) Download file for Micromechanics of void growth and coalescence - Vapor pressure induced failure in thin film and multilayer structures (opens in a new tab)

  11. Crack path selection and shear toughening effects due to mixed mode loading and varied surface properties in beam-like adhesively bonded joints

    … some critical environments, complicated loading modes, or uncertainties in material/interfacial properties are involved. From a mechanics perspective, areas of current interest include understanding the growth of damage and cracks, loading rate dependency of crack propagation, and the effect of …

    vt Repository record for Crack path selection and shear toughening effects due to mixed mode loading and varied surface properties in beam-like adhesively bonded joints (opens in a new tab)

  12. Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface

    … the development of a computationally affordable modeling methodology with predictive capability towards fatigue crack propagation and failure is needed. This present work focuses on copper/epoxy mold compound (EMC) interfacial delamination under fatigue loading both through experiments as well as …

    gatech Repository record for Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface (opens in a new tab)

  13. Experimental and Computational Study on Fracture Mechanics of Multilayered Structures

    … using experiments and finite element (FE) modeling by considering two examples: thin films on polymer substrates in flexible electronics and Cu leadframe/epoxy molding compound (EMC) in micro-electronics packaging. In the first example, aluminum-manganese (Al-Mn) thin films with Mn …

    usf Repository record for Experimental and Computational Study on Fracture Mechanics of Multilayered Structures (opens in a new tab)

  14. Processing, Characterization and Modeling Carbon Nanotube Modified Interfaces in Hybrid Polymer Matrix Composites

    … fabrication process using H-VARTM, and the mode I interlaminar fracture toughness via double cantilever beam (DCB) tests at both room temperature and high temperature are conducted. The cross-sections and fracture surfaces of the panels are characterized using optical and scanning electron …

    tamu Repository record for Processing, Characterization and Modeling Carbon Nanotube Modified Interfaces in Hybrid Polymer Matrix Composites (opens in a new tab)

  15. Stress Intensity Factor Distributions in Bimaterial Systems - A Three Dimensional Photoelastic Investigation

    … direction of far field tensile loading. Mixed-mode stress intensity factors are observed and quantified using a simplified analytical algorithm which makes use of experimentally measured data. In this series of tests, the bimaterial specimens consist of a photoelastic material bonded to the …

    vt Repository record for Stress Intensity Factor Distributions in Bimaterial Systems - A Three Dimensional Photoelastic Investigation (opens in a new tab)

  16. Finite Element Analysis of Probe Induced Delamination of a Thin Film at an Edge Interface

    … to theoretical limit cases. Upon validation, mode I, mode II, and mode III energy release rates are extracted from three-dimensional continuum finite element models of the edge-loaded thin film by a three-dimensional modified crack closure method. Having assumed a circular debond as observed …

    vt Repository record for Finite Element Analysis of Probe Induced Delamination of a Thin Film at an Edge Interface (opens in a new tab)

  17. Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging

    … has been identified as an alternative method for modeling crack propagation and delamination without the need for a pre-existing crack. In a cohesive zone approach, traction forces between surfaces are related to the crack tip opening displacement and are governed by a traction-separation law. …

    gatech Repository record for Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging (opens in a new tab)

  18. Engineered interfaces for toughening of advanced structural materials

    … and studied experimentally under far-field Mode I, II and Mixed Mode loadings. Significant increases in critical loads were observed with the increase of aspect ratio. Numerical analysis was performed to identify mechanisms of toughening. Local mode mixity was found to be the main mechanism …

    nebraska Repository record for Engineered interfaces for toughening of advanced structural materials (opens in a new tab)

Page 1 of 2